BMW Brakes & Brake Parts for BMW 3 Series E93 (2007-2013)

Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a superior zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006+ E9X BMW 335i/is/xi/d
2012-2015 E84 BMW X1 xDrive35i

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006-2013 E9X BMW M3
2011-2012 E82 BMW 1M

Upgrade your front and rear brakes effortlessly with Turner Motorsport's all-inclusive kit. This comprehensive performance brake service package offers everything you require for a seamless brake upgrade. The kit, meticulously assembled by experts, includes rotors, pads, sensors, assembly grease, and a full set of set screws for a hassle-free installation. Enhance your braking system's performance and maintain perfect harmony between components.

Kit Includes:

Front ECS 2-piece semi-floating cross-drilled and slotted rotors Rear ECS 2-piece semi-floating cross-drilled and slotted rotors Front and Rear ECS EP24 "Enthusiast Performance" Brake Pads Front and rear pad wear sensors Stainless steel rotor set screws Brake lubricant compound Turner Motorsport boasts a vast inventory of top-notch brake components, encompassing hoses, hard lines, fluids, hardware, and high-temperature lubricants. Find everything essential for a professional-grade brake service at Turner Motorsport.

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E9X BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Akebono Euro Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
2006+ E9X BMW 335i/is/xi/d
2012-2015 E84 BMW X1 xDrive35i

This performance brake service kit includes ECS 2-Piece performance rotors, Hawk HPS pads, new sensors, assembly grease, and set screws to make your brake upgrade quick and easy.

Includes the following parts:

Front ECS 2-piece semi-floating cross-drilled and slotted rotors Rear ECS 2-piece semi-floating cross-drilled and slotted rotors Front and Rear ECS EP24 "Enthusiast Performance" Brake Pads Front URO and rear URO pad wear sensors ECS stainless steel rotor set screws Brake lubricant compound packets

As an E9X M3 owner, do you feel short-changed in the braking department? The next gen M3/M4 got serious Brembo calipers. With a special bracket the front 6-piston calipers can fit the E9X M3 for a bolt-on caliper and rotor upgrade. The rotors in this kit are 382x36mm - 22mm larger and 6mm thicker than the stock E9X rotor (and slightly bigger than the stock M3/M4 disc). The larger front rotors will help manage and dissipate heat better than the smaller stock rotors. And a larger rotor and caliper mean stronger brakes. Testing has shown the brake bias is very close to a stock E9X M3. Upgraded rear rotors are also included to work with the stock rear calipers. These are the blue M3/M4 calipers with the ///M logo.

Front brake specs:

• 382x36mm 2-piece floating rotors - 50% larger surface area and more cooling vanes
• 6-piston Brembo caliper (blue)
• Custom brake caliper bracket to fit the E9X M3 hub
• Multiple pad options
• Stainless brake lines

Rear brake specs:

• 350x24 2-piece floating rotors (same size as stock)
• re-use stock calipers
• Multiple pad options
• Stainless brake lines

Wheel fitment notes:

• 19" wheels required 
• Wheel spacers may also be required depending on wheel design
• Slight bending of front dust shields is requried

*Will not ZCP Wheels* 

This brake package for the BMW E90/E92/E93 335i comes with everything you need to perform a major brake overhaul --

Rotor Options:

• OEM rotors
• Turner cross-drilled sport rotors
• Turner slotted performance rotors
• Turner drilled+slotted sport rotors
• ECS 2-piece floating rotors

Pad Options:

• OEM street pads
• Street performance sport pads
• Street dust-less pads
• race pads

Additional items included:

• Rotor retaining screws
• Front and rear pad wear sensors
• Brake fluid

Braided stainless steel brake lines are optional and recommended for track or aggressive street use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our 20+ years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

Brake Package FAQ
Brake Pad Buying Guide
Brake Rotor Buying Guide

Applications:
2007-2011 E90 335i sedan
2007-2013 E92 335i coupe
2007-2013 E93 335i convertible

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS V5 Cross-Drilled & Slotted Rotors (Rear) Rear ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!

Turner Motorsport has made it easier than ever to get the high-quality upgrade components you need for your next brake service—all in a single, convenient kit. Our performance brake service kit includes premium ECS rotors, ECS EP24 "Enthusiast Performance pads, a wear sensor, assembly grease, and a full set of rotor set screws, ensuring a seamless upgrade process. Expertly assembled for perfect compatibility, this kit is designed to keep your braking system performing at its best.

Kit Includes:

ECS V5 Cross-Drilled & Slotted Rotors (Front) ECS EP24 "Enthusiast Performance" Brake Pads Brake Pad Wear Sensor ECS Stainless Steel Rotor Set Screws AGS Brake Lubricant Compound Packet Upgrade your braking performance with precision-engineered components!