BMW Internal Engine Parts for BMW 3 Series E93 (2007-2013)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 1-2 days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 3 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

MAHLE Forged Piston Kit 84mm - N54 - 3.0L

T#:2928970

Part#: 197832209

In Stock at Vendor

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC

BMW S65 4.0L MAHLE Forged Piston Kit 92mm

T#:2928987

Part#: 197843622

In Stock

$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,429.99

This product was last offered at the strikethrough price on
09-02-2026

$ 1,335.99 USD

Limited Qty Sale

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm

T#:2928972

Part#: 197832225

Back Ordered

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
Precision Specifications:
- Bore: 84.50mm
- Stroke: 89.6mm
- Rod: 145.05mm
- CH: 31.7mm
- Piston Style: Dish with 4 valve reliefs
- Crown Volume: 17.2cc
- Piston Mass: 314g
- Pin Diameter: 22mm
- Pin Style: Floating
Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

MAHLE PowerPak Piston Kit 92.50mm - S65 - 4.0L

T#:2928989

Part#: 197843642

Ships in 2 Business Days

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

2X Entries Into Our F80 M3 Sweepstakes

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

MAHLE Forged Piston Kit 92mm, 10.1:1 CR - S65 - 4.0L

T#:2928984

Part#: 197843322

Back Ordered

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 92mm with Thermal Barrier Coating (TBC) - S65...

T#:2928983

Part#: 197843322T

Special Order: No Guaranteed ETA

$ 1,673.99 USD

Add to Wish List

Qty

$ 1,673.99 USD

Add to Wish List

Forged 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 84mm with Thermal Barrier Coating (TBC) - N...

T#:2928971

Part#: 197832209T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston. MAHLE forged pistons more tolerant to the abuses of extreme heat, detonation and pressure inherent in performance oriented engines.

Show More Show Less

MAHLE PowerPak Piston Kit 92mm with Thermal Barrier Coating (TBC) - S...

T#:2928988

Part#: 197843622T

Special Order: No Guaranteed ETA

$ 1,673.99 USD

Add to Wish List

Qty

$ 1,673.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54...

T#:2928969

Part#: 197841309T

In Stock

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L

T#:2928976

Part#: 197841325

Ships in 2 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

BMW N54 3.0L MAHLE Forged Piston Kit 84mm

T#:2928968

Part#: 197841309

Ships in 2 Business Days

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84mm delivers superior performance and reliability for your BMW engine build. This high-quality piston kit replaces the factory cast aluminum pistons with robust forged pistons, offering enhanced durability and heat resistance. Designed to withstand the stresses of extreme temperatures, detonation, and high pressure, these pistons are ideal for high-performance applications. MAHLE Motorsport’s PowerPak Piston Kit ensures a significant upgrade in strength and reliability, making it perfect for both motorsport enthusiasts and those seeking to enhance their daily driving experience.

Enhanced Durability: Forged pistons provide superior strength and are more resistant to extreme heat, detonation, and high pressure compared to cast aluminum.
Precision Engineering: Made from high-quality 2618 alloy, ensuring reliability under demanding conditions.
Complete Kit: Includes pistons, pins, clips, and rings for a comprehensive upgrade.
Optimized Performance: Designed for high-performance applications, improving engine efficiency and power output.
Advanced Coatings: Features phosphate, Grafal, and hard anodized top ring groove coatings for extended longevity and performance.

Specifications:

Compression Ratio: 9.5:1
Bore: 84.00mm
Stroke: 89.6mm
Rod: 145.05mm
CH: 31.7mm
Piston Style: Dish, with 4 valve reliefs
Crown Volume: 17.2cc
Piston Mass: 314g
Piston Material: Forged, 2618
Pin Diameter: 22mm
Pin Style: Floating
Pins Included: Yes
Clip Style: Round Wire
Clips Included: Yes
Piston Ring Thickness: 1.0mm, 1.2mm, 2.8mm
Rings Included: Yes
Sold As: Set of 6
Coatings: Phosphate, Grafal, Hard Anodized top ring groove

Show More Show Less

MAHLE Forged Piston Kit 92.50mm - S65 - 4.0L

T#:2928986

Part#: 197843342

Back Ordered

$ 1,429.99 USD

Add to Wish List

Qty

$ 1,429.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 92.50mm with Thermal Barrier Coating (TBC) - ...

T#:2928985

Part#: 197843342T

Special Order: No Guaranteed ETA

$ 1,673.99 USD

Add to Wish List

Qty

$ 1,673.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...

T#:2928973

Part#: 197832225T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE PowerPak Piston Kit 92.50mm with Thermal Barrier Coating (TBC) ...

T#:2928990

Part#: 197843642T

Special Order: No Guaranteed ETA

$ 1,673.99 USD

Add to Wish List

Qty

$ 1,673.99 USD

Add to Wish List

Forged, 4032. Get the performance and reliability your S65 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...

T#:2928977

Part#: 197841325T

Special Order: No Guaranteed ETA

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

N54 Spline Lock Crank Hub Solution With Complete Package

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

MAHLE Forged Piston Kit 84mm - N54 - 3.0L

BMW S65 4.0L MAHLE Forged Piston Kit 92mm

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm

Vargas "Spline Lock" Crank Hub Solution - N54

Spline Lock Crank Hub Solution

Spline Lock Crank Hub Solution W/ Hardware Package - N54

MAHLE PowerPak Piston Kit 92.50mm - S65 - 4.0L

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

MAHLE Forged Piston Kit 92mm, 10.1:1 CR - S65 - 4.0L

MAHLE Forged Piston Kit 92mm with Thermal Barrier Coating (TBC) - S65...

MAHLE PowerPak Piston Kit 84mm with Thermal Barrier Coating (TBC) - N...

MAHLE PowerPak Piston Kit 92mm with Thermal Barrier Coating (TBC) - S...

MAHLE Forged Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54...

MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L

BMW N54 3.0L MAHLE Forged Piston Kit 84mm

MAHLE Forged Piston Kit 92.50mm - S65 - 4.0L

MAHLE Forged Piston Kit 92.50mm with Thermal Barrier Coating (TBC) - ...

MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...

MAHLE PowerPak Piston Kit 92.50mm with Thermal Barrier Coating (TBC) ...

MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results