Turbo Lines & Hoses for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

OE turbocharger hoses and lines are made to perform year-round in any climate. For that reason, they tend to be constructed of flexible materials that will wear out in time. Here you will find everything you need to service all of the turbochargers connecting pipes and oil lines.

Sort By:

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

T#:641167

Part#: BMW-N54-CAP

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270294

Part#: SILCPN54HKS2

Ships in 10 Business Days

$ 464.99 USD

Add to Wish List

Qty

$ 464.99 USD

Add to Wish List

Upgrade your N54’s breathing capabilities with the VTT Silicone Charge Pipe, specifically configured for enthusiasts running an HKS BOV.

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270293

Part#: SILCPN54HKS1

Ships in 10 Business Days

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Upgrade your BMW's intercooler piping with the Vargas Turbo Technologies Silicone Charge Pipe, the easiest-to-install N54 charge pipe on the market.

VTT N54 GC Lite 2.0 Stock Location Turbo Kit - 335 - With Silicone In...

2X Entries Into Our F80 M3 Sweepstakes

T#:35154931

Part#: VTTN54GCL2STOCK

Ships in 10 Business Days

$ 3,809.99 USD

Add to Wish List

Qty

$ 3,809.99 USD

Add to Wish List

Vargas turbochargers feature a complete redesign of key components, including the compressor housing, bearing housing, and turbine housing. These turbos are specifically engineered to fit in the stock N54 location while offering the flow capacity of much larger units. Every detail has been carefully designed to meet our performance, flow, and reliability objectives. The result is a turbo that fits the stock location and supports up to 700WHP. To achieve this, the internal areas of the manifolds, turbine, and compressor housings have been expanded. Additionally, the AR ratio of the turbine housing has been slightly increased to enhance flow without compromising spool time. Simply put, no other turbocharger—whether single or twin—can match the spool, ease of fitment, power, or reliability of our “GC LITE” turbos, which are capable of delivering 700WHP.

Project Cars

SELECT YOUR BMW

Turbo Lines & Hoses for BMW 3 Series E93 (2007-2013)

N54 Turbo Boost Leak Tester - BMW 3-Series E9X N54 3.0L

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

Vargas Single Piece Silicone Cold Side Charge Pipe - BOV HKS - BMW EX...

Vargas Single Piece Silicone Cold Side Charge Pipe - BMW EXX N54 ...

VTT N54 GC Lite 2.0 Stock Location Turbo Kit - 335 - With Silicone In...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results