Oiling System for BMW 3 Series E93 (2007-2013)

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap ...

2X Entries Into Our F80 M3 Sweepstakes

T#:558084

Part#: VTT-CRANK-BREATH

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

VTT N54 Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:557938

Part#: VTT-N54-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice.

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

1x Aluminum Crank Bolt Capture
8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54

Show More Show Less

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

For Vehicles Equipped with a ZF GA6HP19Z Automatic Transmission.

10X Entries Into Our F80 M3 Sweepstakes

T#:640488

Part#: 24117571217

In Stock

Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

Qty

Sale - Save 13%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Mishimoto Oil Line Fitting Adapter Kit - E46 Z4 E9X

For vehicles with high speed synchronization

T#:380389

Part#: MMOCF-BMW

In Stock

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

Install a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Features: Allows for use of -10AN fittings for custom oil cooler setup 100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate Includes durable stock BMW O-rings for leak-free installation Provides additional engine bay space for applications with an oil accumulator or supercharger setup Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit Mishimoto Lifetime Warranty Included: (1) Stainless Steel Fitting Clamp (2) -10AN Fittings (2) BMW Oil O-rings (1) M8 x 1.25 x 25mm Button-Head Bolt Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Large Aluminum Oil Catch Can

T#:597051

Part#: MMOCCLA

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 1-2 days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT Billet BMW Crankcase Breather - Screw In - BMW N54 N55 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes
FOR MODELS WITH VTT BILLET VALVE COVER ONLY

T#:38924625

Part#: VTT-CRANKBREATHE

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Mishimoto Universal Catch Can Kit - Carbon Fiber

T#:372557

Part#: MMOCCCF

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Blue - BMW N52 N5...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122267

Part#: VTTFILTERCAPBLUE

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

Bremmen Engine Oil Pan - E82/88 E9X Z4 RWD (N54/55 3.0L)

10X Entries Into Our F80 M3 Sweepstakes
For RWD models only!

T#:2393341

Part#: 11137570400

In Stock

Sale - Save 15% $ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

Qty

Sale - Save 15%

$ 312.99

This product was last offered at the strikethrough price on
09-16-2026

$ 266.04 USD

Add to Wish List

When your oil pan has suffered damage due to road debris or the vehicle making contact with the road surface, immediate replacement is crucial. This preventative action ensures that any potential cracks or leaks, which could ultimately result in catastrophic engine failure, are averted. Don't wait – safeguard your engine's integrity with a prompt oil pan replacement.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Red - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122280

Part#: TRIPLECAPRED1

In Stock

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

N54 Mishimoto Baffled Oil Catch Can

T#:383384

Part#: MMBCCN5406CBE

In Stock

$ 253.99 USD

Add to Wish List

Qty

$ 253.99 USD

Add to Wish List

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal 10 Row Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378421

Part#: MMOCU

In Stock

$ 410.99 USD

Add to Wish List

Qty

$ 410.99 USD

Add to Wish List

This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

VRSF Aluminum Oil Catch Can BMW N54

We Price Match - Give Us A Call or Chat!

T#:5788181

Part#: 205420

Ships in 1 Business Day

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

Keep your intake tract free of oil with our baffled aluminum oil catch can. N54 motors are prone to excessive blow by which causes the entire intake tract to gunk up with oil and directly contributes to issue where the intake valves get caked with burnt oil creating excessive carbon deposits. This can be prevented with the use of our properly designed oil catch can that was built specifically for the N54 motor to ensure you don’t suffer power loss as well as additional maintenance costs caused by excessive oil blow by. This catch can includes everything necessary for installation on your N54 BMW and takes less than 20-25 minutes to install. Each kit includes is powder coated in black and includes VRSF lifetime.

Show More Show Less

Vargas Oil Feed Adapter - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778141

Part#: VTT-N54-OFA

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

VTT N5X/S55/N2X Triple Billet Cap Kit - Black - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122279

Part#: TRIPLECAPBLK1

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Clear - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122281

Part#: TRIPLECAPCLR1

Ships in 10 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Black - BMW N52 N...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122264

Part#: VTTFILTERCAPBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

BMW 335I/335XI/135I Baffled Oil Catch Can

T#:599444

Part#: MMBCC-N55-11CBE

In Stock at Vendor

9% off MSRP $ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD

Add to Wish List

Qty

9% off MSRP

$ 300.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 272.99 USD

Add to Wish List

BMW 335I/335XI/135I Direct Fit Catch Can, 2011-2013 Direct fit for 2011-2013 BMW 335I/335XI/135I Single 2-Port Compact Baffled Oil Catch Can separates oil particles using 50-micron bronze filter Application-specific bracket mounts the can in a serviceable location Billet 6061 aluminum sealed can Defends intercooler, intake system, and VANOS system from oil blow-by Helps maintain proper octane levels to reduce potential detonation Internal air diverter increases air turbulence to improve oil separation Filters and can are fully serviceable Mishimoto Lifetime Warranty The Mishimoto BMW N55 Baffled Oil Catch Can is designed and engineered to reduce carbon build-up, a common issue with the direct fuel injection N55 engines. The Mishimoto BMW N55 catch can kit uses proven engineering from the Mishimoto 2-Port Compact Baffled Oil Catch Can, with its bronze filter and internal baffle, to better separate the oil from the crankcase vapors. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Red - BMW N52 N54...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122265

Part#: VTTFILTERCAPRED

In Stock

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 89.99

This product was last offered at the strikethrough price on
10-05-2026

$ 80.99 USD

Limited Qty Sale

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

VTT N5X/S55/N2X Triple Billet Cap Kit - Blue - BMW N20/52/54/55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:5122282

Part#: TRIPLECAPBLUE1

In Stock

$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.

Show More Show Less

BMW N54 N55 Heat Exchanger - 17217536929

For vehicles with automatic transmission

10X Entries Into Our F80 M3 Sweepstakes

T#:8677204

Part#: 17217536929

Special Order: No Guaranteed ETA

Sale - Save 15% $ 128.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.28 USD

Add to Wish List

Qty

Sale - Save 15%

$ 128.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.28 USD

Add to Wish List

BMW N54 N55 Heat Exchanger - 17217536929 is designed to maintain optimal transmission oil temperatures, ensuring reliable performance and longevity for your BMW. This high-quality heat exchanger effectively manages heat, preventing overheating and potential damage to the transmission system.

Optimal Temperature Control: Keeps transmission oil at a safe temperature, enhancing overall performance.
Durable Construction: Built to withstand high temperatures and demanding driving conditions.
Improved Reliability: Helps prevent transmission overheating, which can lead to costly repairs.
Direct Replacement: Engineered to fit seamlessly with BMW N54 and N55 engines.

Turner Motorsport's BMW N54 N55 Heat Exchanger - 17217536929 is an essential component for maintaining the efficiency and durability of your transmission system.

Show More Show Less

VTT Oil Block Off Plate - Black

2X Entries Into Our F80 M3 Sweepstakes

T#:27705441

Part#: VTT-OILPLATE-1-B

Ships in 10 Business Days

$ 75.99 USD

Add to Wish List

Qty

$ 75.99 USD

Add to Wish List

Vargas Modular Dual Catch Can/PCV - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778135

Part#: VTT-OCC-1-DUALCA

Ships in 10 Business Days

$ 270.99 USD

Add to Wish List

Qty

$ 270.99 USD

Add to Wish List

If you want to take the guesswork out of plumbing a complex PCV system, the VTT "Ready-to-Install" Dual Catch Can Kit is the definitive answer.

VTT -6 Dual Drain Valves - VTT Modular Catch Cans with -6 ORB bottom ...

For vehicles with VTT Modular PCV/Catch Can Systems

2X Entries Into Our F80 M3 Sweepstakes

T#:52270288

Part#: OCC1DUADRAVAL

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Upgrade your engine bay’s efficiency with the Vargas Turbo Technologies -6 Dual Drain Valve system.

Vargas Single Catch Can Bracket - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778144

Part#: VTT-N54-SCCB

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Designed with flexibility in mind, the VTT N54 Specific Single Catch Can Bracket allows the end-user to take complete control of their PCV routing.

Vargas Modular PCV/Catch Can Single Can - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51813312

Part#: VTT-OCC-1-SINGLE

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

The VTT Single Catch Can Kit is the answer for BMW N54 owners looking to clean up their intake tract and stop oil-related smoking issues.

Vargas Modular Catch Can Kit - Single Can, Stock PCV - BMW E9X, E8X N...

For vehicles with stock valve cover

2X Entries Into Our F80 M3 Sweepstakes

T#:52270289

Part#: OCC2SCSP

Ships in 10 Business Days

$ 311.99 USD

Add to Wish List

Qty

$ 311.99 USD

Add to Wish List

This VTT Modular Catch Can kit is the ultimate solution for N54 owners looking to improve their engine’s health without overcomplicating their setup.

Vargas Billet Oil Filter Housing Cap - Black - BMW E9X M3 S65 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52270291

Part#: S65FILTBLK

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The VTT Billet BMW Oil Filter Housing Cap is the definitive upgrade for E9X M3 owners looking to eliminate the vulnerabilities of the factory engine components.

Vargas Low Side PCV Fitting - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778126

Part#: VTT-OCC-1-LOW-SI

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

The Vargas Low Side PCV Fitting is the essential upgrade for BMW owners looking to optimize their crankcase ventilation without replacing the factory valve cover.

Project Cars

SELECT YOUR BMW

Oiling System for BMW 3 Series E93 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results