BMW Tools & Specialty Equipment for BMW 3 Series E93 (2007-2013)

Precision Raceworks N54/N55 Fuel Injector Tool - BMW N54 N55 3.0L ...

T#:1316809

Part#: 601-0005

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Precision Raceworks' Fuel Injector Removal and Installation Tool is one of the highest-rated tools on the market, not only for removal and installation of injectors but also for the installation and compression of the high-pressure seals! For injector removal, simply thread the tool onto the input of the fuel injector and use the slide hammer to tap the injector out. When installing new seals, simply use needle-nose pliers to pinch the old seal and remove it. Once removed, the new seal can be installed using the included expansion tool found stored inside the shaft of the tool. The rest is as easy as 1, 2, 3! Insert the injector into die #1 and count to 10, then insert the injector into die #2 and count to 20, finally insert the injector into die #3 and count to 30, then install your injector.

Show More Show Less

Bav Auto Crankshaft Front Oil Seal Removal / Installer Tool - N54, N5...

10X Entries Into Our F80 M3 Sweepstakes

T#:580444

Part#: B8800139

In Stock

Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD

Add to Wish List

Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

Ships on Feb 26, 2027

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55

10X Entries Into Our F80 M3 Sweepstakes

T#:580414

Part#: B8800107

Ships in 10 Business Days

Sale - Save 3% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 360.99 USD

Add to Wish List

Qty

Sale - Save 3%

$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 360.99 USD

Add to Wish List

Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.

Show More Show Less

Radiator / Cooling System Pressure Tester- Bavarian Autosport ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580397

Part#: B8800084

In Stock

Sale - Save 15% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD

Add to Wish List

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Media Blaster Kit - BMW N20 N54 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:582473

Part#: B1100008

In Stock

Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Qty

Sale - Save 8%

$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD

Add to Wish List

Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.

Show More Show Less

Bav Auto Timing Tool Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:580365

Part#: B8800041

In Stock

Sale - Save 5% $ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 230.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.44 USD

Add to Wish List

Lock your camshafts in place when servicing your timing system to prevent future timing issues.

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Bav Auto Crankshaft Rear Oil Seal Removal / Installer Tool - N51, N52...

10X Entries Into Our F80 M3 Sweepstakes

T#:580412

Part#: B8800104

In Stock

Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

Qty

Sale - Save 5%

$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD

Add to Wish List

For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Hub Adapter / Hub Puller

10X Entries Into Our F80 M3 Sweepstakes

T#:580427

Part#: B8800120

Ships in 10 Business Days

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

For use with B8800122 impact driver to remove stuck CV axle shafts.

Bav Auto Intermediate Lever Valve Spring Compressor - N20/26 N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580431

Part#: B8800124

In Stock

Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD

Add to Wish List

For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.

Bav Auto Smoke Machine Intake Adapter Bladder

10X Entries Into Our F80 M3 Sweepstakes

T#:580342

Part#: B8800012

In Stock

Sale - Save 15% $ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 76.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 89.99

This product was last offered at the strikethrough price on
05-03-2026

$ 76.49 USD

Add to Wish List

The inflatable intake adapter quickly and easily adapts to all sizes of intake boots, bellows or pipes, as well as exhaust pipes and other vacuum or pressure system tubes. The adapter assures quick and secure connection of your diagnostic smoker (Evaporative Smoke Machine). No more tapered cones slipping out of the boots or pipes. Simply insert the inflatable bladder into the intake boot (or exhaust) and pump the inflation bulb. The bladder will expand to fit round, oval or other odd shaped boots, pipes, bellows, etc. Once inflated, connect your smoker's outlet hose to the second hose on the adapter. The smoke is injected through the tube in the bladder and into the system being tested.

Show More Show Less

Bav Auto Drive Shaft and Differential Nut Remover / Installer ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580440

Part#: B8800135

Ships on Dec 29, 2026

Sale - Save 3% $ 271.99

This product was last offered at the strikethrough price on
05-03-2026

$ 263.83 USD

Add to Wish List

Qty

Sale - Save 3%

$ 271.99

This product was last offered at the strikethrough price on
05-03-2026

$ 263.83 USD

Add to Wish List

Tool used to install / remove the screw nut between your BMW's rear drive axle and the differential - can also be used in replacing your differential input seal.

Bav Auto Rear Subframe Bushing Press - E88 E9X BMW

10X Entries Into Our F80 M3 Sweepstakes

T#:580432

Part#: B8800127

Ships in 10 Business Days

Sale - Save 3% $ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 419.99

This product was last offered at the strikethrough price on
05-03-2026

$ 407.39 USD

Add to Wish List

The Bav Auto Rear Subframe Bushing Press allows you to remove and install rear subframe bushings while the subframe is still in the vehicle, saving you several hours of labor.

Bav Auto Exhaust Pipe Expander - 3 Piece Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580376

Part#: B8800055

In Stock

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

3 piece pipe expander set enabling you to adapt your exhaust pipe to fit together with stock or aftermarket pieces alike.

SPL Parts Adjustment Wrench

T#:553641

Part#: SPLWRENCH

Ships in 1 Business Day

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

This wrench is the perfect addition to your tool box. Made specifically for the SPL hybrid adjusters, it will not damage the finish and is small enough to make the needed adjustments in very tight spaces. Plus, this adjustment wrench comes with a bottle opener built in! Great for cracking open a cold one in your garage or at the track. This wrench is black anodized for looks and corrosion resistance and, as always, is made in the USA!

Show More Show Less

Bav Auto Brake Disc Run Out and Ball Joint Wear Gauge

10X Entries Into Our F80 M3 Sweepstakes

T#:580425

Part#: B8800118

In Stock

Sale - Save 3% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Qty

Sale - Save 3%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.56 USD

Add to Wish List

Used to measure the wear on brake discs and ball joints.

VTT Billet Cylinder Head Lifting Tool (Blue) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921479

Part#: VTT-HH-BLUE-BOTH

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

Vargas Head Port Block Off Kit - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778137

Part#: VTT-OCC-1-HEAD-P

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Engineered for high-performance BMW applications, the Vargas Head Port Block-Off Kit solves the issue of crankcase pressure management in N54 engines.

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638813

Part#: CRANK-PULLER-S55

Ships in 10 Business Days

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921504

Part#: VTT-HH-RED-BOTH

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

VTT “Spline Lock” Hub Puller

2X Entries Into Our F80 M3 Sweepstakes

T#:27638810

Part#: CRANK-PULLER-N54

Ships in 10 Business Days

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

If you have a Spline lock installed they can be nearly impossible to get out without a proper puller. We designed these just for removing the hubs. When removed yours have your cut splines in the crank, on reassembly simply line the splines back up, and follow factory TQ, and stretch procedures on the new bolt.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Black) - N54/N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:4921506

Part#: VTT-HH-BLK-BOTH

Ships in 10 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on N54, N55, and S55 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler 3 short and 3 long extensions 3 short and 3 long M7 bolts

Show More Show Less

Vargas "Head Handler" Cylinder Head Lifting Tool - Black - Long - BMW...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918853

Part#: VTT-HHBLKLONG

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Billet "Head Handler" is the ultimate solution for BMW technicians and enthusiasts who frequently handle heavy cylinder heads.

Vargas DCAN Cable - BMW E Series N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778136

Part#: VTT-DCAN-1

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Beyond just tuning, the VTT BMW N54 D-CAN cable serves as a professional-grade diagnostic interface.

Vargas "Head Handler" Cylinder Head Lifting Tool - Red - Long - BMW N...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918855

Part#: VTT-HHREDLONG

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Designed for the high-volume BMW specialist, the VTT "Head Handler" eliminates the struggle and risks associated with manually lifting heavy cylinder heads.

Vargas "Head Handler" Lifting Tool - Red - Short - BMW B58/N54/N55/S5...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918856

Part#: VTT-HHREDSHRT

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Billet "Head Handler" is the definitive solution for technicians and BMW enthusiasts who frequently perform top-end engine work.

Vargas "Head Handler" Cylinder Head Lifting Tool - Blue - Long - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51918854

Part#: VTT-HHBLULONG

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas Head Handler provides maximum versatility, specifically catering to those who need to remove/install a cylinder head with the camshafts in place.

Project Cars

SELECT YOUR BMW

BMW Tools & Specialty Equipment for BMW 3 Series E93 (2007-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results