BMW Drive Belts & V-Belts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:
E9X M3 Performance Underdrive Pulley Kit
E9X M3 Performance Underdrive Pulley Kit
For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...
Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
Ships on Nov 2, 2026
$ 349.00 USD
Free Shipping
Add to Wish List
$ 349.00 USD
Free Shipping
Add to Wish List
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
OEM Accessory Belt Service Kit - N54 3.0L
OEM Accessory Belt Service Kit - N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
Ships in 1 Business Day
Sale - Save 5% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Add to Wish List
Sale - Save 5%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 187.11 USD
Free Shipping
Add to Wish List
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
OEM Accessory Belt Service Kit - E82/88 E9X N55
OEM Accessory Belt Service Kit - E82/88 E9X N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:567679
Part#: 11287582946KT4
Ships in 1 day
$ 213.63 USD
Free Shipping
Add to Wish List
$ 213.63 USD
Free Shipping
Add to Wish List
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need to be replaced such as the belts, tensioners, and hardware.
Show More Show Less
OEM Accessory Belt Service Kit - N52 3.0L
OEM Accessory Belt Service Kit - N52 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:593693
Part#: N52ABKT
In Stock
Sale - Save 22% $ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD
Free Shipping
Add to Wish List
Sale - Save 22%
$ 135.99

This product was last offered at the strikethrough price on
07-08-2026

$ 105.43 USD
Free Shipping
Add to Wish List
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
Crankshaft Pulley With Vibration Damper
Crankshaft Pulley With Vibration Damper
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593668
Part#: 11237564969
Ships in 1 Business Day
$ 234.99 USD
Free Shipping
Add to Wish List
$ 234.99 USD
Free Shipping
Add to Wish List
Every time the cylinders fire, torque is transferred into the crankshaft. The crankshaft deflects under this torque, which sets up vibrations when the torque is released. At certain engine speeds the torque imparted by the cylinders are in synch with the vibrations in the crankshaft, which results in a phenomenon called resonance This resonance causes stress beyond what the crankshaft can withstand, resulting in crankshaft failure. The accessory pulley acts as a balancer and prevents these vibrations from destroying your crankshaft.
Show More Show Less
N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0L
N54 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N54 3.0...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:1241396
Part#: TMSN54BPKT
Back Ordered
$ 565.99

This product was last offered at the strikethrough price on
09-29-2026

$ 564.99 USD
Free Shipping
Add to Wish List
$ 564.99 USD
Free Shipping
Add to Wish List
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter Looking to go even further and upgrade your Crank Hub as well? Check out T#558924
Show More Show Less
N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0L
N55 "Bulletproof" Crank Hub & Serpentine Kit - BMW E82/88 E9X N55 3.0...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:1241397
Part#: TMSE90N55BPKT
Ships in 1 day
$ 624.99 USD
Free Shipping
Add to Wish List
$ 624.99 USD
Free Shipping
Add to Wish List
BMW has a seemingly endless number of fans of the N54/N55/S55 engines, three straight-six turbo engines that are each capable of 750+ horsepower, but that doesn't mean they were without their faults! BMW's N54 had a notoriously rocky start with reliability due to multiple issues such as fuel injectors failing, turbos failing, serpentine belt failure, crank hubs coming loose, and more... BMW made multiple attempts to fix the issues plaguing the N54, but they could only do so much and the fixes rolled out seemed temporary at best. Following the N54, BMW released their updated N55 and S55 engines, giving many people hope that these engines would address the previous issues. Unfortunately, this was only some-what the case. Crank hubs and crank bolts continued to loosen over time and serpentine belts continued to shred themselves and get pulled into the oil pan through the front main seal. For all three engines, this meant a single failure could effectively turn your engine into an oversized paperweight. Luckily for us, the BMW community is full of skilled enthusiasts who have gladly taken up the task to offer solutions! The first headache to be addressed was the Crank Hub and Bolt. Using a simple plate that fits perfectly over your crank hub's hex-head bolt and mounts up against the damper, the crank bolt is effectively locked in place, preventing it from being able to back out until the plate is fully removed. Next up was the serpentine belt failures. It's not known what exactly causes the serpentine belt to split, but once it does, the pieces hanging off of the belt wrap around and behind the damper. This leads to the belt breaking up into smaller pieces and eventually getting pushed between the crank hub and rear main seal into the oil pan. These small pieces of debris get caught in and block the oil pickup, preventing oil flow and leading to engine failure. To prevent this, multiple aftermarket companies came up with their own versions of Crank Seal Plates. This plate is installed behind the front damper, blocking the opening that allows the serpentine belt to pass between the crank hub and seal, keeping debris out of your oil pan! Also included in this kit are the components to service your front Oil Cooler/Filter Housing gaskets, refresh your drive belt system, and install the aftermarket upgrades. Kit Features and Contents: Vargas Turbo Crank Bolt Capture Vargas Turbo Crank Seal Plate OEM Accessory Belt OEM Belt Tensioner & Idler Pullies Liqui-Moly Longtime High Tech Engine Oil (5w-30) - 7 Liters OEM Hengst Oil Filter OEM Oil Filter/Cooler Housing Gaskets TMS Oil Change Sticker Genuine BMW Full-Strength Coolant - 1 Liter
Show More Show Less
BMW E9X M3 Replacement Belt For Underdrive Pulley Kit - (D560-0004)
BMW E9X M3 Replacement Belt For Underdrive Pulley Kit - (D560-0004) ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!
Dinan - Corporate Logo
T#:586064
Part#: D561-0002
Ships in 5 Business Days
Sale - Save 10% $ 126.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.26 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 126.99

This product was last offered at the strikethrough price on
09-29-2026

$ 114.26 USD
Free Shipping
Add to Wish List

BMW E9X M3 Replacement Belt For Underdrive Pulley Kit - (D560-0004) is an essential component designed specifically for the Underdrive Pulley Kit. This belt is one of the two required for optimal performance of the kit.

  • Designed for Precision: Tailored to fit the BMW E9X M3 Underdrive Pulley Kit perfectly.
  • High-Quality Construction: Built to withstand the demands of high-performance driving.
  • Optimal Performance: Ensures smooth operation and reliable power delivery.
  • Easy Replacement: Simple to install, making maintenance straightforward.
Show More Show Less
E9X M3 6/2008+ Dinan Underdrive Pulley Kit
E9X M3 6/2008+ Dinan Underdrive Pulley Kit
For vehicles with a production date from 06/2008
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:389532
Part#: D560-0004
Ships in 5 Business Days
Sale - Save 10% $ 449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 404.96 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 449.99

This product was last offered at the strikethrough price on
09-28-2026

$ 404.96 USD
Free Shipping
Add to Wish List
Replacement Belt For Underdrive Pulley Kit D560-0003 & D560-0004
Replacement Belt For Underdrive Pulley Kit D560-0003 & D560-0004 ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:586065
Part#: D561-0007
Ships in 5 Business Days
Sale - Save 10% $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 86.30 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 95.99

This product was last offered at the strikethrough price on
09-29-2026

$ 86.30 USD
Free Shipping
Add to Wish List
OEM Belt and Tensioner Service Kit for Power Pulley Kit - E9X M3
OEM Belt and Tensioner Service Kit for Power Pulley Kit - E9X M3 ...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:391555
Part#: S65LPPK-BELTKT
Ships in 1 day
$ 928.99 USD
Free Shipping
Add to Wish List
$ 928.99 USD
Free Shipping
Add to Wish List
We’ve put together the Ultimate Belt & Tensioner Renewal Kit, curated specifically for M3 owners running our Turner E9X M3 Pulley Upgrade. Designed to restore factory fresh mechanical precision while maintaining high performance reliability
Show More Show Less
OEM Accessory Belt Service Kit - E9X M3 S65
OEM Accessory Belt Service Kit - E9X M3 S65
For vehicles with production date from 04/2008
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:391554
Part#: 11287837898
Ships in 1 day
$ 964.99

This product was last offered at the strikethrough price on
08-24-2026

Starting at $ 939.99 USD
Free Shipping
Add to Wish List
Starting at $ 939.99 USD
Free Shipping
Add to Wish List
This comprehensive kit includes both belts, belt tensioners, upper and lower deflection pulleys, and the adjusting pulley. Select from all Genuine BMW parts or a combination of OEM/OE BMW parts. Staying on top of your belt maintenance is the smart move. Cracked or worn belts are a recipe for a headache or worse. The main drive belt runs critical components - the alternator, water pump, and power steering pump. The pulleys contain bearings that may be worn when it comes time to replace the belts. You can check the pulleys by relieving tension on the belt and feeling each pulley for play or grinding. The tensioner also sees similar wear. If your pulleys are new or don't need replacement, you can pick up the belts on their own.
Show More Show Less
Replacement Belt For Underdrive Pulley Kit D560-0003
Replacement Belt For Underdrive Pulley Kit D560-0003
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:586063
Part#: D561-0003
Ships in 5 Business Days
Sale - Save 10% $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.56 USD
Free Shipping
Add to Wish List
Sale - Save 10%
$ 63.99

This product was last offered at the strikethrough price on
09-29-2026

$ 57.56 USD
Free Shipping
Add to Wish List

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping