Home
Engine Parts
Drive Belts, Pulleys, Tensioners

BMW Drive Belts & V-Belts for BMW 3 Series E93 (2007-2013)

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:

Turner Motorsport Power Pulley Kit - E90/E92/E93 M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338810

Part#: TMS1805

Ships in 1 Business Day

Sale - Save 27% $ 546.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 401.99 USD

Add to Wish List

Sale - Save 27%

$ 546.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 401.99 USD

Add to Wish List

Get MORE HORSEPOWER and TORQUE on your 2008, 2009 and newer M3 coupe, sedan or convertible by replacing the stock crank pulley with this specially designed performance version. The Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M3's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade.

Show More Show Less

BMW E9X M3 Turner Motorsport S65 Power Pulley Kit - 2008 M3 DCT ...

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

10X Entries Into Our F80 M3 Sweepstakes

T#:394429

Part#: PPK-S65-LKT

Ships on Mar 10, 2027

Sale - Save 25% $ 546.99

This product was last offered at the strikethrough price on
06-14-2026

$ 410.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 546.99

This product was last offered at the strikethrough price on
06-14-2026

$ 410.24 USD

Add to Wish List

Enhance the performance of your BMW E9X M3 with the BMW E9X M3 Turner Motorsport S65 Power Pulley Kit. This high-quality power pulley kit from Turner Motorsport is designed specifically for the S65 engine, providing increased power and torque for a more exhilarating driving experience. With easy installation and durable construction, this kit is a must-have upgrade for BMW enthusiasts.

Increases power and torque for improved performance
Designed specifically for the S65 engine in BMW E9X M3 models
Easy installation with included instructions
Durable construction ensures long-lasting reliability

Show More Show Less

Turner Motorsport Power Pulley Kit - E9X M3 S65

For vehicles with production date up to 05/2008 & a closckwise rotating Power Steering ...

10X Entries Into Our F80 M3 Sweepstakes
Adds up to 10-14hp and 7-9ft/lbs torque on a stock M3 | For vehicles with production date up to 04/200

T#:395356

Part#: PPK-S65-EKT

Ships in 2 Business Days

Sale - Save 25% $ 535.99

This product was last offered at the strikethrough price on
06-14-2026

$ 401.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 535.99

This product was last offered at the strikethrough price on
06-14-2026

$ 401.99 USD

Add to Wish List

The idea of power pulleys is simple. The less effort the engine puts into running accessories such as the water pump, power steering, pump alternator etc., the more of that power can be used elsewhere - your wheels! The way this is done by reducing the rotation of the pulleys by as much as 10-20%! The end result is more horsepower at your disposal. Turner has done extensive testing (on and off the track), to ensure that the accessory systems still function as intended and without failure. These pulleys offer an excellent compromise of power gains, reliability, and performance.

Show More Show Less

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638889

Part#: VTT-CRANKGUARD

In Stock

Starting at $ 89.99 USD

Add to Wish List

Starting at $ 89.99 USD

Add to Wish List

It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

Ships in 5 Business Days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L

T#:639879

Part#: VAC-HPCD-N54

Ships in 9 Business Days

$ 1,059.99 USD

Add to Wish List

Qty

$ 1,059.99 USD

Add to Wish List

If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 4 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Project Cars

SELECT YOUR BMW

BMW Drive Belts & V-Belts for BMW 3 Series E93 (2007-2013)

Sub-Categories

Turner Motorsport Power Pulley Kit - E90/E92/E93 M3

BMW E9X M3 Turner Motorsport S65 Power Pulley Kit - 2008 M3 DCT ...

Turner Motorsport Power Pulley Kit - E9X M3 S65

Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L

Active Autowerke Power Pulley Kit - E9x M3

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results