BMW Electrical Sensors, Switches, & Relays for BMW 3 Series E93 (2007-2013)

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

New Alternator - 180 Amp

10X Entries Into Our F80 M3 Sweepstakes

T#:26438187

Part#: 12317558220

In Stock

Sale - Save 10% $ 294.99

This product was last offered at the strikethrough price on
06-30-2026

$ 265.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 294.99

This product was last offered at the strikethrough price on
06-30-2026

$ 265.49 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

Alternator - 180amp

10X Entries Into Our F80 M3 Sweepstakes

T#:26438185

Part#: 12317837981

In Stock

Sale - Save 15% $ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD

Add to Wish List

Qty

Sale - Save 15%

$ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Rein Alternator Mounting Screw Set

2X Entries Into Our F80 M3 Sweepstakes

T#:14795

Part#: 12310392568

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

BMW Set Of Alu. Screws Generator -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

Bav Auto Intake Air Temperature Sensor - BMW E9X M3 S65

10X Entries Into Our F80 M3 Sweepstakes

T#:639824

Part#: 13627792203

Ships on Jan 11, 2027

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This sensor provides your BMW's control unit with intake temperature readings in order to run optimally in any condition. If this sensor has failed, your BMW may be suffering from more performance loss than you realize. Replace your IAT sensor to ensure proper temperature readings and restore lost performance! From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Precision Raceworks Ethanol Sensor Breakout Harness

T#:35559424

Part#: 201-0411

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

n Ethanol Sensor Breakout Harness provides a clean wiring solution by splitting the signal from your ethanol content sensor between two analyzers, such as an ECU/controller and a gauge or Bluetooth display, without modifying your existing harness.his setup enables real-time ethanol level monitoring and facilitates comprehensive DME/ECU adjustments for enhanced automotive performance.citeturn0search0

Show More Show Less

Alternator Pulley - E82 E90 E92 E60

We Price Match - Give Us A Call or Chat!

T#:19332

Part#: 12317570152

Ships in 3 Business Days

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

This OEM alternator pulley has a ratcheting mechanism inside that can wear out, causing a rattling sound. This mechanism allows the alternator to freewheel to a degree. This is only for the Valeo brand alternator/

This item fits the following BMWs:
2008+ E82 BMW 128i with N51 engine
2006-2007 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2007 E90 BMW 328i 328xi - Sedan with N51 engine
2006-2007 E91 BMW 325xi - Wagon
2007-2007 E92 BMW 328i 328xi 328i xDrive - Coupe with N51 engine
2006-2007 E60 BMW 525i 525xi 530i 530xi

Show More Show Less

Bav Auto Crankshaft Position Sensor - Multiple BMWs

10X Entries Into Our F80 M3 Sweepstakes

T#:639826

Part#: 13627525015

Special Order: No Guaranteed ETA

$ 67.99 USD

Add to Wish List

Qty

$ 67.99 USD

Add to Wish List

This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Oil Pressure Switch (fits most BMWs)

2X Entries Into Our F80 M3 Sweepstakes

T#:363

Part#: 12617568480

In Stock

$ 11.99

This product was last offered at the strikethrough price on
04-21-2026

$ 7.39 USD

Add to Wish List

Qty

$ 7.39 USD

Add to Wish List

Having your oil pressure light come on can mean very serious problems. Or it could just be this switch that fails several times over a car's lifespan. By no means should you ignore the warning light but replacing this sensor could be the actual culprit. The other problem with this switch is that oil can leak past its seal. With the oil under a lot of pressure at this point, the oil loss can be a serious concern. It's a simple replacement when doing most oil change work.

This Oil Pressure Switch fits the following BMWs:
1985-1991 E30 318i, 318is, 325e, 325i, M3
1992-1999 E36 318i/is, 325i/is, 328i/is, 323is, M3
1992-1997 E31 840i, 850i
1988-1994 E32 735i, 735iL, 740i, 740iL
1989-1995 E34 525i, 530i, 535i, 540i, M5
1995-2001 E38 740i, 740iL, 750i, 750iL
1996-2002 Z3 Roadster/Coupe 1.9, 2.3, 2.5, 2.8, 3.0, 3.2
1997-2003 E39 525i, 528i, 530i, 540i, M5
1999-2005 E46 323, 325, 328, 330, M3
2000-2003 Z8 roadster
2001-2006 E53 X5 X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
2002+ E65/E66 745i, 745li, 750i, 750li, 760i, B7 Alpina
2003+ Z4 Roadster/Coupe Z4 2.5, 3.0, 3.0si
2004+ E60 525i, 530i, 535i, 545i, 550i, M5
2005+ E63/E64 645Ci, 650i, M6
2005+ E83 X3 X3 2.5, X3 3.0
2006+ E90/E92 325, 328, 330, 335
2007+ E70 X5 X5 3.0i, X5 4.8i

Show More Show Less

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Red)

T#:38161695

Part#: 201-0360-RED

Ships in 9 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Red in color and 12 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Yellow

T#:38161692

Part#: 201-0360-YEL

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Yellow in color and 12 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead (White)

T#:38161693

Part#: 201-0360-WHT

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. White in color and 12 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Black) 12 Gauge ...

T#:38161711

Part#: 201-0360-BLK

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 12 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Green)

T#:38161687

Part#: 201-0361-GRN

Ships in 9 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Green in color and 18 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Blue

T#:38161703

Part#: 201-0360-BLU

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Blue in color and 12 Gauge.

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Black - Dual 18 Ga...

T#:38161710

Part#: 201-0362

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 18 Gauge dual wire.

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Orange

T#:38161698

Part#: 201-0360-ORG

Ships in 9 Business Days

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Orange in color and 12 Gauge.

Starter Mounting Hardware

2X Entries Into Our F80 M3 Sweepstakes

T#:594380

Part#: 12410392577

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Modern starter and water pump fasteners are torque-to-yield, meaning they stretch and can only be safely used once. Replace your hardware for peace of mind.

OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F2...

For Vehicles with a 210A alternator & a Production Date from 03/2012

T#:42167226

Part#: EA0141

Back Ordered

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Whether you're replacing a failing alternator pulley or performing preventive maintenance, this Alternator Pulley ensures your BMW continues to perform with factory precision and reliability.

Project Cars

SELECT YOUR BMW

BMW Electrical Sensors, Switches, & Relays for BMW 3 Series E93 (2007-2013)

Sub-Categories

Motiv ReFlex+ for BMW

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

New Alternator - 180 Amp

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

Alternator - 180amp

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

Rein Alternator Mounting Screw Set

Motiv ReFlex+ Control Unit

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

OMP Battery Cut Off Switch / Kill Switch

ReFlex+ Install Harness - Flying Lead

Bav Auto Intake Air Temperature Sensor - BMW E9X M3 S65

Precision Raceworks Ethanol Sensor Breakout Harness

Alternator Pulley - E82 E90 E92 E60

Bav Auto Crankshaft Position Sensor - Multiple BMWs

ReFlex+ Install Kit

Oil Pressure Switch (fits most BMWs)

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Red)

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Yellow

Wire With Terminals For 90 Degree 6 Pin Bulkhead (White)

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Black) 12 Gauge ...

Wire With Terminals For 90 Degree 6 Pin Bulkhead (Green)

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Blue

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Black - Dual 18 Ga...

Wire With Terminals For 90 Degree 6 Pin Bulkhead - Orange

Starter Mounting Hardware

OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F2...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results