BMW Electrical Sensors, Switches, & Relays for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Electrical gremlins can be very frustrating. Luckily your BMW's electrical system is better than most, even if it's 25 years old. Here you will find electrical relays, sensors, switches, and modules for the engine, camshaft, and crankshaft. Our parts are OEM, Genuine BMW, or approved aftermarket brands that we have an excellent track record with. There is no middle ground with electrical parts - it either works perfectly or not. And there's nothing more frustrating than a new part that fails right out of the box. So it's important to choose quality replacement parts over a cheap but faulty piece.

Sub-Categories

Sort By:
Motiv ReFlex+ for BMW
Motiv ReFlex+ for BMW
Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 859.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor
Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 105.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less
New Alternator - 180 Amp
New Alternator - 180 Amp
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:26438187
Part#: 12317558220
In Stock
Sale - Save 10% $ 294.99

This product was last offered at the strikethrough price on
06-30-2026

$ 265.49 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 294.99

This product was last offered at the strikethrough price on
06-30-2026

$ 265.49 USD
Free Shipping on orders $49 and up
Add to Wish List
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less
Alternator - 180amp
Alternator - 180amp
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:26438185
Part#: 12317837981
In Stock
Sale - Save 15% $ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 15%
$ 304.99

This product was last offered at the strikethrough price on
05-03-2026

$ 259.24 USD
Free Shipping on orders $49 and up
Add to Wish List
BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6
BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6
Motiv Motorsports - Corporate Logo
T#:29201081
Part#: 900.1008
In Stock
$ 200.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 200.00 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

  • Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
  • Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
  • Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
  • Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
  • Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less
Motiv ReFlex+ Control Unit
Motiv ReFlex+ Control Unit
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 729.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less
Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6
Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...
Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 479.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less
ReFlex+ Install Harness - Flying Lead
ReFlex+ Install Harness - Flying Lead
Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
In Stock
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
Bav Auto Intake Air Temperature Sensor - BMW E9X M3 S65
Bav Auto Intake Air Temperature Sensor - BMW E9X M3 S65
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:639824
Part#: 13627792203
Ships on Jan 12, 2027
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This sensor provides your BMW's control unit with intake temperature readings in order to run optimally in any condition. If this sensor has failed, your BMW may be suffering from more performance loss than you realize. Replace your IAT sensor to ensure proper temperature readings and restore lost performance! From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Precision Raceworks Ethanol Sensor Breakout Harness
Precision Raceworks Ethanol Sensor Breakout Harness
Precision Raceworks - Corporate Logo
T#:35559424
Part#: 201-0411
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
n Ethanol Sensor Breakout Harness provides a clean wiring solution by splitting the signal from your ethanol content sensor between two analyzers, such as an ECU/controller and a gauge or Bluetooth display, without modifying your existing harness.his setup enables real-time ethanol level monitoring and facilitates comprehensive DME/ECU adjustments for enhanced automotive performance.citeturn0search0
Show More Show Less
Alternator Pulley - E82 E90 E92 E60
Alternator Pulley - E82 E90 E92 E60
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19332
Part#: 12317570152
Ships in 4 Business Days
$ 66.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 66.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This OEM alternator pulley has a ratcheting mechanism inside that can wear out, causing a rattling sound. This mechanism allows the alternator to freewheel to a degree. This is only for the Valeo brand alternator/

This item fits the following BMWs:
2008+ E82 BMW 128i with N51 engine
2006-2007 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2007 E90 BMW 328i 328xi - Sedan with N51 engine
2006-2007 E91 BMW 325xi - Wagon
2007-2007 E92 BMW 328i 328xi 328i xDrive - Coupe with N51 engine
2006-2007 E60 BMW 525i 525xi 530i 530xi
Show More Show Less
Bav Auto Crankshaft Position Sensor - Multiple BMWs
Bav Auto Crankshaft Position Sensor - Multiple BMWs
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:639826
Part#: 13627525015
Special Order: No Guaranteed ETA
$ 67.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 67.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This crankshaft position sensor provides the ECU with the engine speed signal. It is mounted in either the engine block or the bell housing of the transmission on most cars. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
ReFlex+ Install Kit
ReFlex+ Install Kit
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Vargas USB To Serial For HPFP Controller - BMW N54
Vargas USB To Serial For HPFP Controller - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778112
Part#: N54-USB-SERIAL-H
Ships on Oct 26, 2026
New Item
$ 37.99 USD
Free Shipping
Add to Wish List
$ 37.99 USD
Free Shipping
Add to Wish List
Take full control of your N54’s fueling system with the Vargas Turbo Technologies USB to Serial adapter.
Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S63
Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships on Oct 26, 2026
New Item
$ 59.99 USD
Free Shipping
Add to Wish List
$ 59.99 USD
Free Shipping
Add to Wish List
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Red)
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Red)
Precision Raceworks - Corporate Logo
T#:38161695
Part#: 201-0360-RED
Ships in 10 Business Days
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 5.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Red in color and 12 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Green)
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Green)
Precision Raceworks - Corporate Logo
T#:38161687
Part#: 201-0361-GRN
Ships in 10 Business Days
$ 3.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 3.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Green in color and 18 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Black - Dual 18 Gauge
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Black - Dual 18 Ga...
Precision Raceworks - Corporate Logo
T#:38161710
Part#: 201-0362
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 18 Gauge dual wire.
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Yellow
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Yellow
Precision Raceworks - Corporate Logo
T#:38161692
Part#: 201-0360-YEL
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Yellow in color and 12 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Black) 12 Gauge
Wire With Terminals For 90 Degree 6 Pin Bulkhead (Black) 12 Gauge ...
Precision Raceworks - Corporate Logo
T#:38161711
Part#: 201-0360-BLK
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Black in color and 12 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead (White)
Wire With Terminals For 90 Degree 6 Pin Bulkhead (White)
Precision Raceworks - Corporate Logo
T#:38161693
Part#: 201-0360-WHT
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. White in color and 12 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Blue
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Blue
Precision Raceworks - Corporate Logo
T#:38161703
Part#: 201-0360-BLU
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Blue in color and 12 Gauge.
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Orange
Wire With Terminals For 90 Degree 6 Pin Bulkhead - Orange
Precision Raceworks - Corporate Logo
T#:38161698
Part#: 201-0360-ORG
Ships in 10 Business Days
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 4.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Upgrade any wiring system with this optimal solution, ensuring reliability and durability in any demanding automotive application. Orange in color and 12 Gauge.
OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F22, F23, F25, F3x, F87
OEM INA Alternator Pulley - Overrunning Type - E82, E88, E9x, F10, F2...
For Vehicles with a 210A alternator & a Production Date from 03/2012
Ina - Corporate Logo
T#:42167226
Part#: EA0141
Back Ordered
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Whether you're replacing a failing alternator pulley or performing preventive maintenance, this Alternator Pulley ensures your BMW continues to perform with factory precision and reliability.

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping