BMW Electrical Sensors, Switches, & Relays for BMW 3 Series E93 (2007-2013)

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 859.00 USD

Add to Wish List

Qty

$ 859.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

N52 Valvetronic Camshaft Adjuster Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5416764

Part#: 11377548388TMSKT

In Stock

Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Qty

Sale - Save 19%

$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Includes new Valvetronic motor, gasket, and hardware. The Valv-tronic adjuster unit changes the the timing shaft to adjust the valve timing.

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Rein Alternator Mounting Screw Set

2X Entries Into Our F80 M3 Sweepstakes

T#:14795

Part#: 12310392568

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

BMW Set Of Alu. Screws Generator -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

BMW E6X / E8X / E9X - N52 Replacement Starter Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15777314

Part#: SR0492NKT2-KT

In Stock

Sale - Save 4% $ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD

Add to Wish List

Qty

Sale - Save 4%

$ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD

Add to Wish List

Is your car having trouble starting? Does your starter click when you turn the key? Sounds like it's time for a new starter motor! Includes new starter with no core charge, intake gaskets, throttle body gasket and hardware.

Show More Show Less

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 729.00 USD

Add to Wish List

Qty

$ 729.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

Bosch Starter Motor With Hardware

10X Entries Into Our F80 M3 Sweepstakes

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

Valvetronic Camshaft Adjuster replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677492

Part#: 11127556161-KT

In Stock

Sale - Save 19% $ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Qty

Sale - Save 19%

$ 220.99

This product was last offered at the strikethrough price on
05-03-2026

$ 179.28 USD

Add to Wish List

Valv-tronic adjuster unit, Changes the the timing shaft to adjust the valve timing.

Febi Crankshaft Position Sensor - E31, E38, E39, E52, E60, E63, E64, ...

We Price Match - Give Us A Call or Chat!

T#:382432

Part#: 13627839138

Ships on Jan 11, 2027

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Referred to as the speed sensor & reference sensor

Oil Pressure Switch (fits most BMWs)

2X Entries Into Our F80 M3 Sweepstakes

T#:363

Part#: 12617568480

In Stock

$ 11.99

This product was last offered at the strikethrough price on
04-21-2026

$ 7.39 USD

Add to Wish List

Qty

$ 7.39 USD

Add to Wish List

Having your oil pressure light come on can mean very serious problems. Or it could just be this switch that fails several times over a car's lifespan. By no means should you ignore the warning light but replacing this sensor could be the actual culprit. The other problem with this switch is that oil can leak past its seal. With the oil under a lot of pressure at this point, the oil loss can be a serious concern. It's a simple replacement when doing most oil change work.

This Oil Pressure Switch fits the following BMWs:
1985-1991 E30 318i, 318is, 325e, 325i, M3
1992-1999 E36 318i/is, 325i/is, 328i/is, 323is, M3
1992-1997 E31 840i, 850i
1988-1994 E32 735i, 735iL, 740i, 740iL
1989-1995 E34 525i, 530i, 535i, 540i, M5
1995-2001 E38 740i, 740iL, 750i, 750iL
1996-2002 Z3 Roadster/Coupe 1.9, 2.3, 2.5, 2.8, 3.0, 3.2
1997-2003 E39 525i, 528i, 530i, 540i, M5
1999-2005 E46 323, 325, 328, 330, M3
2000-2003 Z8 roadster
2001-2006 E53 X5 X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
2002+ E65/E66 745i, 745li, 750i, 750li, 760i, B7 Alpina
2003+ Z4 Roadster/Coupe Z4 2.5, 3.0, 3.0si
2004+ E60 525i, 530i, 535i, 545i, 550i, M5
2005+ E63/E64 645Ci, 650i, M6
2005+ E83 X3 X3 2.5, X3 3.0
2006+ E90/E92 325, 328, 330, 335
2007+ E70 X5 X5 3.0i, X5 4.8i

Show More Show Less

Febi Relay - Replaces White/Green

We Price Match - Give Us A Call or Chat!

T#:16375128

Part#: 61368373700

Ships on Jan 11, 2027

Sale - Save 28% $ 15.99

This product was last offered at the strikethrough price on
05-15-2026

$ 11.56 USD

Add to Wish List

Qty

Sale - Save 28%

$ 15.99

This product was last offered at the strikethrough price on
05-15-2026

$ 11.56 USD

Add to Wish List

This relay is often the fuel pump relay for many BMW models. To ensure the relay is correct for your car please check the pin locations

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Febi Outdoor Temperature Sensor / Probe

We Price Match - Give Us A Call or Chat!

T#:382731

Part#: 65816936953

Ships in 1 Business Day

$ 20.47 USD

Add to Wish List

Qty

$ 20.47 USD

Add to Wish List

Common fix for incorrect OBC temperature readings

Vargas USB To Serial For HPFP Controller - BMW N54

2X Entries Into Our F80 M3 Sweepstakes

T#:51778112

Part#: N54-USB-SERIAL-H

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Take full control of your N54’s fueling system with the Vargas Turbo Technologies USB to Serial adapter.

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672717

Part#: VTT-MAP-HARNESS

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Crankshaft Position Sensor

We Price Match - Give Us A Call or Chat!

T#:16175684

Part#: 13627525015

Special Order: No Guaranteed ETA

$ 46.99 USD

Add to Wish List

Qty

$ 46.99 USD

Add to Wish List

BMW Air Flow / Mass Meter

T#:47644907

Part#: 13627593624

Special Order: No Guaranteed ETA

$ 214.99 USD

Add to Wish List

Qty

$ 214.99 USD

Add to Wish List

Starter Motor

T#:56544032

Part#: 12412354701

Special Order: No Guaranteed ETA

$ 146.99 USD

Add to Wish List

Qty

$ 146.99 USD

Add to Wish List

Built by Febi Bilstein, this complete assembly ensures seamless integration into your vehicle’s electrical and flywheel system.

Crankshaft Position Sensor

T#:56254775

Part#: 13627582842

Special Order: No Guaranteed ETA

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

This Febi Crankshaft Position Sensor ensures your ECU receives ultra-fast, precise engine speed and position data under all driving conditions.

Starter Mounting Hardware

2X Entries Into Our F80 M3 Sweepstakes

T#:594380

Part#: 12410392577

Ships in 1 Business Day

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Modern starter and water pump fasteners are torque-to-yield, meaning they stretch and can only be safely used once. Replace your hardware for peace of mind.

Engine Oil Level Sensor - 12618608780

T#:54816234

Part#: 1000540

Special Order: No Guaranteed ETA

$ 116.99

This product was last offered at the strikethrough price on
06-10-2026

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

When BMW threw out the mechanical dipstick, they shifted the responsibility of protecting your engine entirely to the electronic oil level sensor. On the street or the track, knowing your oil level is non-negotiable. If your dashboard sensor readout is throwing errors or lagging, your N52, N54, N55, S55, or N63 engine is operating in the dark. This Febi Bilstein engine oil level sensor is an excellent, cost-effective alternative to expensive dealership parts counter pieces. Febi is an industry-trusted German manufacturer, ensuring this sensor reads with the exact same precision and calibration as original equipment. Keep your ultimate driving machine properly monitored and safe from oil starvation. Key Features Premium German Engineering: Manufactured by Febi Bilstein to match original BMW operational tolerances. Critical Engine Protection: Restores accurate iDrive/instrument cluster oil volume and temperature readouts. Exact Factory Fit: Features the correct 3-pin oval plug orientation for a seamless plug-and-play install. Track-Day Insurance: Ensures your electronic monitoring system functions flawlessly under heavy load. Turner Tip: Oil level sensors are notorious for failing due to age and repeated heat cycles. Because this sensor installs directly into the bottom of the oil pan, make this swap part of your next oil service kit checklist.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Electrical Sensors, Switches, & Relays for BMW 3 Series E93 (2007-2013)

Sub-Categories

Motiv ReFlex+ for BMW

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

N52 Valvetronic Camshaft Adjuster Replacement Kit

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

Rein Alternator Mounting Screw Set

BMW E6X / E8X / E9X - N52 Replacement Starter Kit

Motiv ReFlex+ Control Unit

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

ReFlex+ Install Harness - Flying Lead

Bosch Starter Motor With Hardware

Valvetronic Camshaft Adjuster replacement kit

Febi Crankshaft Position Sensor - E31, E38, E39, E52, E60, E63, E64, ...

Oil Pressure Switch (fits most BMWs)

Febi Relay - Replaces White/Green

ReFlex+ Install Kit

Febi Outdoor Temperature Sensor / Probe

Vargas USB To Serial For HPFP Controller - BMW N54

Vargas MAP Sensor Extension Harness - BMW B58, N54, N55, S55, S58, S6...

Crankshaft Position Sensor

BMW Air Flow / Mass Meter

Starter Motor

Crankshaft Position Sensor

Starter Mounting Hardware

Engine Oil Level Sensor - 12618608780

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results