BMW Intake Boots & Hoses for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

The intake boot provides a pathway for air from the air flow sensor to the intake manifold. On most BMWs the boot is made of rubber with an accordian shape that allows the engine to shift and vibrate. As with any rubber component the rubber can dry out and crack and that can lead to serious running and drivability issues. A crack in the boot means that air is entering the engine that is not being monitored by the airflow sensor. The engine computer relies on data from the airflow sensor to set the fuel mixture in the engine. Excess unmetered air can result in lean condition faults, rough running, misfires, and other performance issues. For misfire and lean condition faults, check your intake boots first.

As an alternative to the original rubber, we also offer silicone boots that are both stronger and last longer with a 4-layer silicone design. Samco silicone boots can also decrease your BMW's intake turbulence and restriction by replacing the accordian design with a smoothed internal surface. Samco boots are also perfect as part of a kit to eliminate the factory traction control system (sometimes called an ASC delete boot).
Sort By:

Vargas PCV Cover & Valve Upgrade - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51813319
Part#: VTT-N54-UPCVVK
Ships in 6 Business Days
New Item
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Maintain peak engine efficiency and stop annoying oil smoke with the VTT N54 Upgraded PCV Valve Complete Kit.
Vargas Turbo Technologies - Corporate Logo
T#:389931
Part#: VTT-N54-SIL-4
Ships in 10 Business Days
$ 346.99 USD
Free Shipping
$ 346.99 USD
Free Shipping
These silicone inlets from Vargas Turbo are designed to ease the installation of your new turbochargers or improve the reliability of your existing setup. Silicone hose is much stronger and more resistant to heat than the stock parts, meaning that you can build more boost and make more power without fear of your inlets failing. In addition, they don't collapse as easily under pressure. These important attributes make silicone inlets an ideal and necessary upgrade for your turbocharged BMW. Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.
Show More Show Less
Genuine BMW - Corporate Logo
T#:119157
Part#: 51748050583
Ships in 1 day
4% off MSRP $ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping
4% off MSRP
$ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping


Genuine BMW Air Duct Front Left -
This item fits the following BMW Chassis:
E92,E93


Genuine BMW - Corporate Logo
T#:119158
Part#: 51748050584
Ships in 1 day
4% off MSRP $ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping
4% off MSRP
$ 222.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 212.99 USD
Free Shipping


Genuine BMW Air Duct Front Right -
This item fits the following BMW Chassis:
E92


Vargas Turbo Technologies - Corporate Logo
T#:389932
Part#: VTT-N54-SIL-1
In Stock
$ 346.99

This product was last offered at the strikethrough price on
08-04-2026

$ 322.99 USD
Limited Qty Sale
Free Shipping
$ 346.99

This product was last offered at the strikethrough price on
08-04-2026

$ 322.99 USD
Limited Qty Sale
Free Shipping
These silicone inlets from Vargas Turbo are designed to ease the installation of your new turbochargers or improve the reliability of your existing setup. Silicone hose is much stronger and more resistant to heat than the stock parts, meaning that you can build more boost and make more power without fear of your inlets failing. In addition, they don't collapse as easily under pressure. These important attributes make silicone inlets an ideal and necessary upgrade for your turbocharged BMW. Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.
Show More Show Less
Mishimoto - Corporate Logo
T#:597112
Part#: MMHOSE-E9006IHRD
In Stock at Vendor
$ 87.99 USD
Free Shipping
$ 87.99 USD
Free Shipping
The Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single-stage or 3-stage intake manifolds. The silicone construction will provide you with long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free! WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Mishimoto - Corporate Logo
T#:597111
Part#: MMHOSE-E9006IHBK
In Stock at Vendor
$ 87.99 USD
Free Shipping
$ 87.99 USD
Free Shipping
The Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single-stage or 3-stage intake manifolds. The silicone construction will provide you with long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free! WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Genuine BMW - Corporate Logo
T#:43158
Part#: 13717536004
Ships in 3 Business Days
5% off MSRP $ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD
Free Shipping
5% off MSRP
$ 87.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 83.99 USD
Free Shipping


Genuine BMW Rubber Boot -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N51,N52,N52N


Genuine BMW - Corporate Logo
T#:22359
Part#: 11617838286
Ships in 1 day
1% off MSRP $ 163.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.36 USD
Free Shipping
1% off MSRP
$ 163.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.36 USD
Free Shipping


Genuine BMW Rubber Boot -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65


Genuine BMW - Corporate Logo
T#:43379
Part#: 13717599282
Ships in 1 day
2% off MSRP $ 209.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.99 USD
Free Shipping
2% off MSRP
$ 209.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 204.99 USD
Free Shipping


Genuine BMW Intake Duct -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N55

Genuine BMW - Corporate Logo
T#:43209
Part#: 13717556546
Ships in 1 day
3% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping
3% off MSRP
$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping


Genuine BMW Intake Duct -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N54,N54T

Genuine BMW Upper Intake Charge Pipe - E82/88 E9X N55 3.0L
For vehicles with a production date up to 03/2011
Genuine BMW - Corporate Logo
T#:43388
Part#: 13717599294
Ships in 1 day
6% off MSRP $ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD
Free Shipping
6% off MSRP
$ 434.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 408.99 USD
Free Shipping


Genuine BMW Charge Air Induction Tract -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N55



Genuine BMW - Corporate Logo
T#:43211
Part#: 13717556549
Ships in 1 day
3% off MSRP $ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping
3% off MSRP
$ 236.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping


Genuine BMW Air Duct
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E89 Z4,E90,E92,E93

Fits BMW Engines including:
N54,N54T