BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 3 Series E93 (2007-2013)

Oil Filter Housing Gasket KIT

10X Entries Into Our F80 M3 Sweepstakes

T#:637846

Part#: 1142753729312KT1

In Stock

$ 97.99

This product was last offered at the strikethrough price on
08-17-2026

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Oil Filter Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:5403248

Part#: 11427537293TMSKT

In Stock

$ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

N52 Oil Filter Housing Gasket Kit - Includes Oil Pressure Sensor ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15677580

Part#: 11427540759-KT

In Stock

Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD

Add to Wish List

Qty

Sale - Save 1%

$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD

Add to Wish List

This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

For vehicles with a production date from 10/2006

10X Entries Into Our F80 M3 Sweepstakes

T#:180875

Part#: TMS180875

In Stock

$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.43 USD

Add to Wish List

Qty

$ 107.43 USD

Add to Wish List

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

11127582245 - N52 valve cover gasket set
11127552280 - N52 eccentric shaft sensor seal
11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:21735875

Part#: VALVECVRN52KT

In Stock

Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Qty

Sale - Save 11%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

10X Entries Into Our F80 M3 Sweepstakes

T#:56038085

Part#: 11137600482KT4

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Oil Filter Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15677487

Part#: 11427542983-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Oil Pan Gasket Replacement Kit

For vehicles with automatic transmission only

10X Entries Into Our F80 M3 Sweepstakes

T#:5403285

Part#: 11137548031TMSKT

In Stock

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Oil Pan Gasket - With Bolts

10X Entries Into Our F80 M3 Sweepstakes

T#:15644297

Part#: 11132210959-KT

In Stock

$ 83.40 USD

Add to Wish List

Qty

$ 83.40 USD

Add to Wish List

A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Oil Cooler Housing Gasket Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:637847

Part#: 11428637820KT1

In Stock

$ 179.99

This product was last offered at the strikethrough price on
09-01-2026

$ 174.99 USD

Add to Wish List

Qty

$ 174.99 USD

Add to Wish List

Elring Oil Pan Gasket And CRP Hardware Set

10X Entries Into Our F80 M3 Sweepstakes

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Oil Filter Housing Gasket Kit - N52 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:24212294

Part#: N52OFHGKT

In Stock

Sale - Save 3% $ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

Qty

Sale - Save 3%

$ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

A leaking gasket can cause headaches down the road, usually when you least expect it. The N52 engine can suffer a particularly troublesome leak around the oil filter housing gasket. Generally seen as something to keep an eye on, this is not something that should be put off. The upgraded Bavarian Autosport gasket is made from a DuPont Viton rubber that has a higher temperature and chemical resistance than the stock gasket material. This gasket should last the lifetime of the engine without breaking down and leaking like the Genuine BMW parts do.

Show More Show Less

Valve Cover Gasket Kit - E9x M3 S65

10X Entries Into Our F80 M3 Sweepstakes

T#:26505029

Part#: 11127838272KT2

Back Ordered

$ 376.99

This product was last offered at the strikethrough price on
08-07-2026

$ 365.99 USD

Add to Wish List

Qty

$ 365.99 USD

Add to Wish List

Enhance the performance and longevity of your BMW S65 engine with this all-inclusive valve cover gasket service kit!

This comprehensive kit addresses the common issue of deteriorating valve cover gaskets in the S65 engine. Over time, heat exposure and engine oil can cause these gaskets to degrade, leading to leaks that result in smoke and unpleasant odors from burning oil.

Engineered for seamless integration and hassle-free operation, this kit streamlines the valve cover gasket replacement process, saving you valuable time and money.

Kit Includes:

Genuine BMW Valve Cover Gaskets - Bank 1 (11127838271) & Bank 2 (11127838272)
8x URO Parts Plastic Spark Plug Tubes (11127835170)
26x NRW Design Silicone Valve Cover Grommet/Seal (replaces 11127841217)

Each component has been meticulously selected to ensure optimal durability and leak prevention. Whether you're a professional mechanic or a DIY enthusiast, rest assured that every part in this kit is of the highest quality and precision-engineered for peak performance.

Show More Show Less

Eccentric Shaft Replacement Kit - N55/S55

10X Entries Into Our F80 M3 Sweepstakes

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,208.99 USD

Add to Wish List

Qty

$ 1,208.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

OEM+ S65 WPC Bearing with ARP Rod Bolt Lv3 Kit- E9X M3 (LM)

10X Entries Into Our F80 M3 Sweepstakes

T#:22196336

Part#: BEARINGBOLTARPKT

In Stock

$ 1,860.99

This product was last offered at the strikethrough price on
10-07-2026

$ 1,791.99 USD

Add to Wish List

Qty

$ 1,791.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, ARP Connecting Rod Bolts, 9 Qts Liqui Moly GT1 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

Complete Valve Cover Gasket Kit - BMW S65 4.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:28869570

Part#: 11127838271TKT

Ships in 7 Business Days

$ 323.99

This product was last offered at the strikethrough price on
06-05-2026

$ 302.99 USD

Add to Wish List

Qty

$ 302.99 USD

Add to Wish List

If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.

Show More Show Less

Febi Oil Pan Gasket

We Price Match - Give Us A Call or Chat!

T#:16375133

Part#: 11137600482

Ships on Jan 11, 2027

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

Replace your worn out and leaking oil pan gasket and avoid having to top off between oil changes.

Oil Cooler thermostat replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:41391173

Part#: 11428637820TKT

In Stock

$ 311.99

This product was last offered at the strikethrough price on
09-01-2026

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

BMW’s legendary turbocharged inline-6 engines demand consistent cooling to perform at their best. With the Oil Cooler Thermostat Replacement Kit - N54, N55, BMW enthusiasts can enjoy more reliable oil temperature regulation and enhanced performance both on the street and the track.

Show More Show Less

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56038088

Part#: 11137600482KT5

In Stock

$ 281.52 USD

Add to Wish List

Qty

$ 281.52 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

OEM S65 WPC Bearing with Genuine BMW Rod Bolt Lvl3 Kit- E9X M3 (CS) ...

10X Entries Into Our F80 M3 Sweepstakes

T#:15677519

Part#: 112478345220KT

In Stock

$ 1,625.99 USD

Add to Wish List

Qty

$ 1,625.99 USD

Add to Wish List

Includes WPC Treated Genuine BMW Bearings, Genuine BMW Connecting Rod Bolts, 9 Qts OEM Castrol 10w-60 Oil, Genuine BMW Hardware and Redline Assembly Lube - 4 oz

Oil Filter Housing Gasket Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15744018

Part#: 11427537293-KT

In Stock

$ 202.99 USD

Add to Wish List

Qty

$ 202.99 USD

Add to Wish List

If you have a leaking oil filter housing seal why not replace it while doing a oil service also and save down time on you car. The kit incudes a Oil service kit along with oil filter housing gasket, thermostat housing gasket.

Show More Show Less

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710825

Part#: CR222SV-KT

In Stock

Sale - Save 7% $ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

Qty

Sale - Save 7%

$ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

This kit includes every thing needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Rod Bearing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15710826

Part#: CR222SV0KT

In Stock

Sale - Save 7% $ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

Qty

Sale - Save 7%

$ 578.95

This product was last offered at the strikethrough price on
10-07-2026

$ 538.16 USD

Add to Wish List

This kit includes every thing needed to replace your rod bearings. Kit includes Upper and lower road bearings Hardware Oil filter BMW TwinPower Turbo Oil Oil pan gasket RedLine assembly lube

Show More Show Less

Oil Pan Gasket replacement kit

10X Entries Into Our F80 M3 Sweepstakes

T#:15644328

Part#: 111375351060KT

In Stock

$ 218.09 USD

Add to Wish List

Qty

$ 218.09 USD

Add to Wish List

A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years. This kit also includes the hardware for the oil pan that is a one time use item.

OEM Febi Front Main Crankshaft Seal - 65x79x10mm - BMW N52 N54 N55 3....

For vehicles with a production date up to 02/2011

We Price Match - Give Us A Call or Chat!

T#:38419106

Part#: 11117547842

Ships on Jan 11, 2027

$ 18.99 USD

Add to Wish List

Qty

$ 18.99 USD

Add to Wish List

This seal needs to be replaced whenever a leak occurs, or whenever doing a timing chain service.

Air Conditioning O-Ring - Priced Each - 13.8mm

T#:54816249

Part#: 64538375742

Special Order: No Guaranteed ETA

$ 0.99 USD

Add to Wish List

Qty

$ 0.99 USD

Add to Wish List

Heavy-duty track-day grade green O-ring keeps BMW A/C systems sealed.

Rear Crankshaft Seal

T#:56254758

Part#: 11117547841

Special Order: No Guaranteed ETA

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Febi Bilstein offers this OE-quality replacement rear main shaft seal designed to handle high RPMs, extreme engine heat, and harsh synthetic oil environments.

Oil Filter Housing Gasket

T#:56254772

Part#: 11427537293

Special Order: No Guaranteed ETA

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

This Febi Bilstein oil filter housing gasket engineered for BMW engines delivers OE-matching precision and superior heat resistance.

Oil Cooler Gasket Set

T#:56580187

Part#: 11428637820

Special Order: No Guaranteed ETA

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

The Febi Gasket Set delivers a precision-engineered sealing solution designed to withstand demanding operating environments.

Oil Cooler Gasket

T#:56110292

Part#: 11427525335

Special Order: No Guaranteed ETA

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-grade Febi Bilstein gasket is engineered to handle extreme engine compartment conditions and serve as a dependable, direct-fit replacement.

Valve Cover Gasket

T#:56363341

Part#: 11127565286

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

This Febi Bilstein Valve Cover Gasket offers OE-quality sealing designed to withstand severe heat cycles, high temps, and intense pressure conditions.

Project Cars

SELECT YOUR BMW

BMW Gaskets, Gasket Sets, Seals, & O-Rings for BMW 3 Series E93 (2007-2013)

Sub-Categories

Enhance the performance and longevity of your BMW S65 engine with this all-inclusive valve cover gasket service kit!

Kit Includes:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results