BMW Engine Parts for BMW 3 Series E93 (2007-2013)

BMW Ignition Coil with Spark Plug Connector (ELDOR)

T#:641259

Part#: 12138657273

In Stock

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Used in a wide variety of BMW engines to ensure proper spark plug operation.

Eldor Ignition Coil - 12138616153

T#:29234309

Part#: 12138616153

In Stock

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Show More Show Less

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

Blackline Performance Edition Blue Oil Filter Housing Cap

T#:11366500

Part#: FXXOFH-B

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Motorsport Blue Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.

Show More Show Less

BLACKLINE Performance Fuel Cap Cover

For Model Years 2010 or Newer

T#:797049

Part#: FXXFCC

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

VTT Billet Power Steering Pulley - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:7292042

Part#: VTT-N54-PSN54

Ships in 2 Business Days

Starting at $ 56.99 USD

Add to Wish List

Starting at $ 56.99 USD

Add to Wish List

Vargas has introduced their new Billet Power Steering pulleys for the N54 engine! A well-known issue with the N54 with Hydraulic power steering is the plastic pulley either hitting the subframe, or breaking on its own. This can result in the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. This also increases the chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with the VTT 100% Billet Aluminum PS pulley. These are constructed from 6061-T6 aluminum and anodize in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market.

Show More Show Less

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530040

Part#: VACUUMCANBLUE

Ships in 1 Business Day

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Valve Seal Repair Kit - Exhaust

T#:596691

Part#: 11340035853

In Stock

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Burning oil at start-up and the first few minutes of running often is a sign your valve seals are bad. What happens is your valve seals become brittle and shrink up when cold, causing oil consumption and blue smoke from the exhaust. When the engine warms up, the seals expand, stopping the consumption.

Show More Show Less

VTT Ignition Coil Conversion Kit - S55/N55 To B58 - Multiple Color Op...

2X Entries Into Our F80 M3 Sweepstakes

T#:22196341

Part#: VTTS55CLCNV

Back Ordered

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**

Show More Show Less

Crankshaft Seal - Front

T#:594913

Part#: 11117547842

In Stock

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

This seal needs to be replaced whenever a leak occurs, or whenever doing a timing chain service.

Corteco Rear Crankshaft Seal

T#:591494

Part#: 11117587168

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

90x110x8mm Replace your leaking crankshaft seal

Corteco Rear Crankshaft Seal - E60, E63, E64, E90, E92, E93

T#:391381

Part#: 11217838071

In Stock

$ 51.11

This product was last offered at the strikethrough price on
04-27-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Replace when doing a clutch job.

BMW E9X M3 Motor And Transmission Mount Kit

T#:18998593

Part#: 11812283798KT11

In Stock

$ 309.99 USD

Add to Wish List

Qty

$ 309.99 USD

Add to Wish List

BMW E9X M3 Motor And Transmission Mount Kit is designed to eliminate excess slop and vibrations that can negatively impact your driving experience. As motor and transmission mounts wear over time, they can lead to noticeable vibrations and a less precise shifter feel. This comprehensive kit offers an effective solution by including two high-quality motor and transmission mounts along with all necessary mounting hardware, ensuring a smooth and enjoyable ride.

Benefits:

Improved Driving Experience: Reduces unwanted vibrations and slop for a more responsive and comfortable ride.
High-Quality Components: Includes original equipment engine and transmission mounts, ensuring durability and reliability.
Complete Installation Kit: Comes with all necessary mounting hardware for a straightforward installation process.
Enhanced Vehicle Performance: Restores the integrity of the drivetrain, improving overall vehicle handling and responsiveness.
Easy to Install: Designed for direct replacement, making installation simple and efficient.

Upgrade your BMW's performance with the BMW E9X M3 Motor And Transmission Mount Kit for a firmer, more connected driving feel.

Show More Show Less

BLACKLINE Performance Fuel Cap Cover - Motorsport Blue

Fits 2010+ Model Year BMWs only!

T#:6635763

Part#: FXXFCC-B

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.

Show More Show Less

BLACKLINE BMW M Car Series BLACKLINE Performance Heritage Motorsport ...

For vehicles with a production date up to 03/2010

T#:53820895

Part#: S54OCCS

In Stock

$ 118.99

This product was last offered at the strikethrough price on
05-15-2026

$ 83.00 USD

Add to Wish List

Qty

$ 83.00 USD

Add to Wish List

Designed for Seamless Integration the Heritage Motorsport Oil Cap provides a Solid Aluminum Replacement for Aging Plastic units

BLACKLINE Performance Washer Fluid Cap - Red - E9X

T#:5229441

Part#: E9XWFC-R

In Stock

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Introducing the full replacement Billet Washer Fluid Cap for BMW E9X (3 Series) vehicles! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are Goldenwrench's most complex pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on their other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW E9X (3 Series) vehicles.

Show More Show Less

BLACKLINE Performance E9x Washer Fluid Cap - Motorsport Blue ...

T#:8123165

Part#: E9XWFC-B

Ships in 4 Business Days

$ 47.00 USD

Add to Wish List

Qty

$ 47.00 USD

Add to Wish List

Introducing the full replacement Billet Washer Fluid Cap for BMW E9x vehicles! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW E9x vehicles. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with a Motorsport Blue color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Washer Fluid Cap will fit most BMW E9x model cars (please see application guide below). Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.

Show More Show Less

Valve Cover Gasket Set

T#:15478721

Part#: 11127587804

Back Ordered

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

A leaky valve cover gasket makes a mess of your engine, your garage, and allows the life-blood of your engine to escape. Replace leaky valve cover gaskets and always start with a fresh gasket after valve cover removal. Trouble trying to track down your leak? The easiest way to do so is by cleaning your engine, then examining for leaks.

Show More Show Less

Drain Plug Sealing Washer

T#:517811

Part#: 07119963151

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Corteco Valve Stem Seal Kit - Intake

T#:591662

Part#: 11340034068

In Stock

$ 25.99

This product was last offered at the strikethrough price on
04-28-2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Seal fitted to the end of the valve

Vargas N54 To B58 Coil Conversion Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:7292057

Part#: VTT-N54-B58-CNV

Back Ordered

Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

Sale - Save 5%

$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD

Add to Wish List

VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.

Show More Show Less