BMW Engine Parts for BMW 3 Series E93 (2007-2013)

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships in 4 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Oil Distribution/Sending Block Adapter - Allows For An Oil Pressure/t...

T#:1120864

Part#: 100.11.530.0003

In Stock

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

Mounts in stock oil pressure sensor location for easy installation
Allows use of up to two aftermarket sending units in addition to the factory sensor
Incorporates factory sending unit for utilizing the factory oil pressure light
Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
Includes banjo bolt and crush washers for secure installation
Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30

Show More Show Less

N54/N55/S55/N52/N20/N26 Magnetic Billet Oil Filter Housing Cap - Blac...

T#:5269536

Part#: OILCAPNXXS55BLA

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

Radium Engineering Catch can kit - E9X 335i E8X 135i

T#:577808

Part#: 20-0373

In Stock

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

T#:5269538

Part#: OILCAPNXXS55BLU

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

Bimmerworld S65 Oil Dipstick Parts Kit - E9X M3

T#:637641

Part#: 100.11.590.0004

Ships in 7 Business Days

$ 229.99 USD

Add to Wish List

Qty

$ 229.99 USD

Add to Wish List

A frustration too many BMW owners share is the inability to physically check the oil level. BMW began replacing traditional style dipsticks with new level sensors that display your oil level on your iDrive system. In theory, this could be great. An electrical, sensor-based oil level system would allow for continuous monitoring of the oil level and immediate warning in the event of oil loss. The main problem with this updated system is the sensors themselves and the sub-par electronics that control and report this information to the iDrive system. In practice, the oil level sensors have proven to be slow, inaccurate, and even faulty, displaying wildly inaccurate measurements. Needless to say, the team over at Bimmerworld felt this needed to be addressed with something a little more reliable. Returning to the tried and true method, Bimmerworld now offers their very own S65 Oil Dipstick Parts Kit. This kit includes everything you need to install a dipstick in your M3.

Show More Show Less

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

T#:5269535

Part#: OILCAPNXXS55POL

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

Radium Engineering Universal Catch Can Petcock Drain Kit

T#:27905095

Part#: 20-0024

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock at Vendor

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

BMW F8X E6X Oil Filter Housing Cap Magnetic Billet - Red Anodized ...

T#:5269537

Part#: OILCAPNXXS55RED

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

VF Engineering Supercharger Kit - 595hp & 385 ft-Lbs Torque - E9X M3 ...

T#:378755

Part#: VFK91-02

Ships on Oct 27, 2026

13% off MSRP $ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

Qty

13% off MSRP

$ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

Show More Show Less

Radium Engineering Fuel Surge Tank Kit - E9X Non M

T#:577879

Part#: 20-0470

Back Ordered

Starting at $ 599.99 USD

Add to Wish List

Starting at $ 599.99 USD

Add to Wish List

Designed to prevent fuel starvation by acting as a reserve tank to keep fuel flowing in the case of the main tank sump running dry, during hard acceleration or turning for example. The BMW fuel surge tank install kit includes all needed brackets and hoses for a complete installation. This surge tank kit installs in place of the factory filter and fuel pressure regulator located in the fuel tank for a easy installation, the factory fuel pump is still in place and acts in tandem with the surge tank pumps by maintaining fuel level in the surge tank.

Show More Show Less

VF Engineering Oil Cooler With Oil Lines - E9X M3

T#:378330

Part#: VFAOC-E9MKT

Back Ordered

$ 1,692.99 USD

Add to Wish List

Qty

$ 1,692.99 USD

Add to Wish List

This oil cooler from VF Engineering is the perfect BMW oil cool for your M3. Produced by CSF for VF engineering, this cooler contains desely packed bars and plates for the greatest possible surface area for heat exchange. This oil cooler offers many benefits over stock, including 2 extra rows of even better cooling. In addition, this cooler is compatible with all modifications that the stock cooler is applicable such as a supercharger system.

Show More Show Less