BMW Engine Parts for BMW 3 Series E93 (2007-2013)

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships on Nov 2, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Magnetic Sump/Oil Pan Plug

T#:22723756

Part#: MMR03-0504

Ships in 2 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

MMX Oil Filler Cap - Black

For Most BMW Models 2007 Onwards or Mini Models

T#:4552062

Part#: MMR03-0102-BL

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

MMX's Performance billet oil filler cap machined from billet T-6061 aluminum has been designed to instantly give your engine bay an subtle aesthetic upgrade. This cap comes in a Black finish. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur. Reusing of original seal is required.

Show More Show Less

MMR Low Temp Thermostat - N54/N55

For 2008 and up models

T#:4565826

Part#: MMR17-0101

Back Ordered

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.

Show More Show Less

MMX Performance Billet Aluminum S65 VANOS Covers - E9X M3 S65 ...

T#:44529374

Part#: MMR03-2001

Ships in 2 Business Days

$ 514.99 USD

Add to Wish List

Qty

$ 514.99 USD

Add to Wish List

Replace your factory plastic VANOS covers with these Billet Aluminum covers from MMX Performance for long term peace of mind

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

Back Ordered

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

T#:19891361

Part#: MMR20-1004

Ships in 2 Business Days

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

T#:45039725

Part#: MMR20-1004FK

Ships in 2 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

MMR Crank Hub Kit - N55/S55

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

MMX Oil Filter Housing - Black

T#:4552065

Part#: MMR03-0101-BL

Ships in 2 Business Days

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

T#:4552049

Part#: MMR03-0502-KP

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX Oil Thermostat Dress-Up Caps - Black

T#:5269482

Part#: MMR03-0502BL

Special Order: No Guaranteed ETA

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Billet Air Conditioning Caps - Pair Black

T#:48608191

Part#: MMR03-0004

Ships in 7 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The MMX Billet Air Conditioning Cap Set replaces cheap OEM pieces with durable aluminum replacements that withstand track thermal cycles and everyday driving.

MMX Performance Billet Oil Filler Cap

T#:28968889

Part#: MMR03-1601

Special Order: No Guaranteed ETA

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

MMX Oil Thermostat Dress-Up Caps W/ Gauge Adaptor - Black

T#:5269479

Part#: MMR03-0502GBL

Special Order: No Guaranteed ETA

$ 111.99 USD

Add to Wish List

Qty

$ 111.99 USD

Add to Wish List

This dress-up kit offers a high-quality aesthetic update to the OE thermostat cover. Thermostat dress up kit for the BMW N55, N54, and S55 engines manufactured from T6061 billet aluminum. Installation is extremely easy and dresses up the engine bay nicely. Includes billet adaptor which is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMX Oil Pressure Gauge Adaptor - Black

T#:5269476

Part#: MMR03-0502KBL

Special Order: No Guaranteed ETA

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The MMX Performance billet adaptor is a helpful addition for those wishing to run an auxiliary oil pressure or oil temperature gauge. The adaptor replaces the plug that can be found on the oil cooler thermostat assembly with a 1/8NPT gauge adaptor.

Show More Show Less

MMX Engine Oil Cooler M3 (E9)

T#:4538249

Part#: MMR17-0201

Special Order: No Guaranteed ETA

$ 770.99 USD

Add to Wish List

Qty

$ 770.99 USD

Add to Wish List

MMX's Performance Engine Oil cooler is a direct upgrade for the E9x M3 cooler. Perfect for upgraded vehicles such as those with superchargers or those simply needing a more reliable option over the OEM cooler. This upgraded cooler will help keep your engine oil temperatures in check be it on or off the track. Dimensions: Width 77cm Height 11.5cm Depth 6.5cm

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

E9X M3 Performance Underdrive Pulley Kit

Magnetic Sump/Oil Pan Plug

MMX Oil Filler Cap - Black

MMR Low Temp Thermostat - N54/N55

MMX Performance Billet Aluminum S65 VANOS Covers - E9X M3 S65 ...

OMP Battery Cut Off Switch / Kill Switch

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

MMR Crank Hub Kit - N55/S55

MMX Oil Filter Housing - Black

MMX Oil Pressure Gauge Adaptor - Dark Anthracite

MMX Oil Thermostat Dress-Up Caps - Black

MMX Billet Air Conditioning Caps - Pair Black

MMX Performance Billet Oil Filler Cap

MMX Oil Thermostat Dress-Up Caps W/ Gauge Adaptor - Black

MMX Oil Pressure Gauge Adaptor - Black

MMX Engine Oil Cooler M3 (E9)

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results