BMW Engine Parts for BMW 3 Series E93 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Turbo Boost Leak Testers - Corporate Logo
T#:641167
Part#: BMW-N54-CAP
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
This Boost Leak Tester kit mounts inside both of the flexible intake hoses that lead to your turbo's compressor inlet flanges. You will need to remove the air box (or your aftermarket air filters) to expose the 2 intake pipes. Install the testers in each pipe and pressurize the system using the tire schrader with your tire inflation tool. The kit comes with the necessary caps to block the diverter valve return flanges on the intake pipes, also a cap to block the breather line at the bakc of the valve cover. Once the kit is installed, use compressed air to charge the system and you will see that both gauges read the compressor pressure you are filling with. You'll be able to test the turbo to the motor checking all leak points in between, including intercooler, clamped connections, intake manifold, divertor valves and the many random potential leak points. Note: Testing at the intake pipe, you may hear noise coming from the o-ring (at ~12 psi test pressure) that seals the intake pipe to the turbo inlet from debris. This is not a boost leak, these are not meant to see boost and not intended to be perfectly sealed, however hearing this hissing may be mis-diagnosed as a leak. In this case reduce the pressure. If no obvious leaks are heard in any other location, the test is complete and there are no significant leaks The gauge on the boost leak tester allows the user to: apply a safe amount of pressure to prevent injury or damage to the charge pipes or engine read how fast the system holds and bleeds air after removing the air source give a good comparison of compressor outlet air Vs. boost test air while pressurizing. The smaller the difference the lesser the air loss in the system Design Features: Plastic End Caps with 1/8" NPT threaded gauge port & fitting port Boost Gauges with 30 PSI / 1Bar Boost Gauge Universal Tire Schrader Valve (can be removed and tapped for 1/4" NPT thread fitting if desired) (2) Stainless Steel T-Bolt Clamps with Teflon lock-nut (3) Vinyl Caps for diverter valve return and valve cover breather
Show More Show Less
Mishimoto - Corporate Logo
T#:23020165
Part#: MMBCC-CBTWO
In Stock
$ 160.99 USD
Free Shipping on orders $49 and up

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less
Mishimoto - Corporate Logo
T#:51075072
Part#: MMIG-BMW-0206
Ships in 3 Business Days
$ 184.99 USD
Free Shipping on orders $49 and up
The Mishimoto Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

Hitachi - Corporate Logo
T#:589968
Part#: 11327601233
Back Ordered
$ 55.00 USD
Free Shipping on orders $49 and up
$ 55.00 USD
Free Shipping on orders $49 and up
A faulty camshaft follower can damage the engine and cause incorrect valve timing.

Mishimoto - Corporate Logo
T#:51075065
Part#: MMTB-N54-07
Ships in 3 Business Days
$ 320.99 USD
Free Shipping on orders $49 and up
The Mishimoto N54 Turbo Blanket (Part # MMTB-N54-07) addresses the massive heat output inherent to turbocharged engines.

Mishimoto - Corporate Logo
T#:51075067
Part#: MMIG-BMW-1108
Ships in 3 Business Days
$ 274.99 USD
Free Shipping on orders $49 and up
The Mishimoto Ignition Coil (MMIC-BMW-11B) focuses on durability and electrical precision.
Mishimoto - Corporate Logo
T#:51110138
Part#: MMIG-BMW-07
Ships in 3 Business Days
$ 41.99 USD
Free Shipping on orders $49 and up
Mishimoto’s Delphi-style ignition coils offer a premium solution for BMW owners looking to replace worn-out factory units.

Mishimoto - Corporate Logo
T#:51075078
Part#: MMIG-BMW-0204
Ships in 3 Business Days
$ 123.99 USD
Free Shipping on orders $49 and up
The Mishimoto BMW Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

Mishimoto - Corporate Logo
T#:51075071
Part#: MMIG-BMW-0706
Ships in 3 Business Days
$ 204.99 USD
Free Shipping on orders $49 and up
The Mishimoto Ignition Coil focuses on durability and electrical precision.
Hitachi - Corporate Logo
T#:48850063
Part#: 12138657273
Ships in 6 Business Days
$ 53.99 USD
Free Shipping on orders $49 and up
Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code, but not always a check engine light. A misfire code may be related to an ignition coil, but could be from other things as well. ometimes, a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.
Show More Show Less
Hitachi - Corporate Logo
T#:48815454
Part#: 13627525014
Ships in 6 Business Days
$ 40.00 USD
Free Shipping on orders $49 and up
The camshaft position sensor communicates the position of the camshaft to the computer. This helps the computer to calculate proper spark and fuel control. If you're struggling with CELs, hard starts or no starts, stalling, and/or a rough idle, you may need to replace the cam position sensor.
Show More Show Less


Mishimoto - Corporate Logo
T#:51075090
Part#: MMIG-BMW-02
Ships in 3 Business Days
$ 72.99 USD
Free Shipping on orders $49 and up
The Mishimoto BMW Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.
Hitachi - Corporate Logo
T#:48850074
Part#: 13627582842
Ships in 6 Business Days
$ 184.99 USD
Free Shipping on orders $49 and up
Engine cranks but doesn't start? This sensor is often the issue.
Hitachi - Corporate Logo
T#:48815471
Part#: 13627525015
Ships in 6 Business Days
$ 66.99 USD
Free Shipping on orders $49 and up
The crankshaft position sensor transmits the crankshaft's position to the computer. This helps the computer to calculate proper spark and fuel control. If you're struggling with CELs, hard starts or no starts, stalling, and/or a rough idle, you may need to replace the crank position sensor.
Show More Show Less

Hitachi - Corporate Logo
T#:48850079
Part#: 16117243975
Ships in 6 Business Days
$ 344.99 USD
Free Shipping on orders $49 and up
Delivers fuel from the tank to the engine.