BMW Engine Parts for BMW 3 Series E93 (2007-2013)

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships on Nov 2, 2026

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

4 PIN One-Piece CRANK HUB - S55/N55

T#:3729859

Part#: CH-4PIN

Ships in 1-2 days

$ 1,099.00 USD

Add to Wish List

Qty

$ 1,099.00 USD

Add to Wish List

The Insane Crank Hub kits are designed and manufactured in Lithuania and made from a solid block of thermally absorbed, heat-treated steel and milled on a 5 axis precision CNC machine to create what they believe to be the strongest crank hub kit on the market today!

Show More Show Less

VAC Motorsports Oil Pan Baffle N55 3.0L Engine

T#:26038565

Part#: VAC-OPB-N55

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

Prevents significant loss of oil pressure
Vital for track and street use
Ensures engine longevity and performance
Trusted by high-performance BMWs worldwide

Show More Show Less

VAC Motorsports Crank Seal Guard - N54 N55 S55

T#:29765724

Part#: VAC-11-CSG-N5X

Ships in 7 Business Days

$ 155.99

This product was last offered at the strikethrough price on
05-02-2026

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The VAC Motorsports Crank Seal Guard, made of 6061 Billet Aluminum, prevents your serpentine belt from being pulled into your engine, a common problem amongst BMW N54, N55, and S55 Engines. Without a crank seal guard, the serpentine belt on N54, N55, and S55 engines is commonly sucked into the crank hub area past the crank seal, where it enters your engine and disrupts engine timing. When this occurs, the belt is shredded and clogs engine oil pickup, starving the engine and reducing oil pressure, causing catastrophic engine failure and thousands of dollars worth of damage. VAC Motorsports’ Crank Seal Guards are precision machined for perfect fitment and provide rigidity and maximum protection. We designed our guard with self-locating pilots to perfectly seal the crank hub bore and provide even, minimum clearance around the crank hub. Installation Hardware included. Made in the USA.

Show More Show Less

K&P Engineering High Performance Stainless Steel Micronic Oil Filter ...

T#:402535

Part#: S38

Ships in 3 Business Days

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

Consistent filtering across entire filter surface
Superior ASTMF316 filtration performance
Magnetic Prefiltering
Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
Easy inspection of engine contamination
Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft.

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

Watch to learn how to clean a K&P oil filter

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi
2007 - 2010 E60 528i 528xi 535i 535ix
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si

Show More Show Less

S55/N55 2 One-Piece PIN CRANK HUB

T#:3729860

Part#: CH-2 PIN

In Stock

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

The Insane Crank Hub kits are designed and manufactured in Lithuania and made from a solid block of thermally absorbed, heat-treated steel and milled on a 5 axis precision CNC machine to create what they believe to be the strongest crank hub kit on the market today!

Show More Show Less

VAC Performance Coated Rod Bearing Kit - Standard Size - S65 ...

T#:1061445

Part#: VAC-HPRBK-S65

Ships in 6 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

VAC's S65 bearings are embraced by BMW engine builders world wide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical.

Show More Show Less

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 2 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 6 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

Ships in 2 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

2 PIN One-Piece CRANK HUB - N54

T#:3729861

Part#: CH-N54

Ships in 4 Business Days

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

This kit includes all the necessary components to successfully replace the stock OEM crank hub with the single-piece crank hub. The kit now includes Hardened crankshaft damper bolts at no additional charge.

Show More Show Less

Accusump Marine 2 Qt Kit

T#:8246787

Part#: 24-126

Ships on Oct 30, 2026

17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

Qty

17% off MSRP

$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

VF Engineering Supercharger Kit - 595hp & 385 ft-Lbs Torque - E9X M3 ...

T#:378755

Part#: VFK91-02

Ships on Oct 27, 2026

13% off MSRP $ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

Qty

13% off MSRP

$ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

For vehicles with a production date up to 05/2008 with single drive belt.

T#:553840

Part#: PP.S65.V8.A

Ships in 8 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

VF Engineering Oil Cooler With Oil Lines - E9X M3

T#:378330

Part#: VFAOC-E9MKT

Back Ordered

$ 1,692.99 USD

Add to Wish List

Qty

$ 1,692.99 USD

Add to Wish List

This oil cooler from VF Engineering is the perfect BMW oil cool for your M3. Produced by CSF for VF engineering, this cooler contains desely packed bars and plates for the greatest possible surface area for heat exchange. This oil cooler offers many benefits over stock, including 2 extra rows of even better cooling. In addition, this cooler is compatible with all modifications that the stock cooler is applicable such as a supercharger system.

Show More Show Less

VAC MOTORSPORTS PREMIUM STROKER KIT, BMW S65, 4.4L/4.5L/4.6L/4.7L - I...

T#:16840476

Part#: SKS65ST2941151S

Ships in 2 Business Days

$ 11,988.99 USD

Add to Wish List

Qty

$ 11,988.99 USD

Add to Wish List

VF Engineering Supercharger Kit - 625hp & 400ft-Lbs - E9X M3 S65 ...

T#:597656

Part#: VFK92-01

Ships on Oct 27, 2026

$ 8,995.00 USD

Add to Wish List

Qty

$ 8,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

Show More Show Less

VF Engineering VF650 Supercharger Kit - E9X M3 S65 4.0L

T#:18733517

Part#: VFK93-01

Ships on Oct 27, 2026

$ 9,995.00 USD

Add to Wish List

Qty

$ 9,995.00 USD

Add to Wish List

The VF-Engineering M3 supercharger for the BMW E90/92/93 S65 engine is a fully upgrade-able water cooled supercharger system. Designed to provide the most consistent charge temperatures under aggressive driving, the VF water intercooler system has a greater propensity to dissipate heat energy out of the air charge than an air intercooler. VF650 Specifications: 650hp | 420tq 7.5-8.0psi Vortech V3-Si Trim Air to water charge cooler *Requires 93oct or higher *Motorsport Exhaust

Show More Show Less

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Nov 2, 2026

$ 303.99 USD

Add to Wish List

Qty

$ 303.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.