BMW Engine Parts for BMW 3 Series E93 (2007-2013)

VAC Motorsports Oil Pan Baffle N55 3.0L Engine

T#:26038565

Part#: VAC-OPB-N55

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

Prevents significant loss of oil pressure
Vital for track and street use
Ensures engine longevity and performance
Trusted by high-performance BMWs worldwide

Show More Show Less

4 PIN One-Piece CRANK HUB - S55/N55

T#:3729859

Part#: CH-4PIN

Ships in 1-2 days

$ 1,099.00 USD

Add to Wish List

Qty

$ 1,099.00 USD

Add to Wish List

The Insane Crank Hub kits are designed and manufactured in Lithuania and made from a solid block of thermally absorbed, heat-treated steel and milled on a 5 axis precision CNC machine to create what they believe to be the strongest crank hub kit on the market today!

Show More Show Less

VAC Motorsports Crank Seal Guard - N54 N55 S55

T#:29765724

Part#: VAC-11-CSG-N5X

Ships in 7 Business Days

$ 155.99

This product was last offered at the strikethrough price on
05-02-2026

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The VAC Motorsports Crank Seal Guard, made of 6061 Billet Aluminum, prevents your serpentine belt from being pulled into your engine, a common problem amongst BMW N54, N55, and S55 Engines. Without a crank seal guard, the serpentine belt on N54, N55, and S55 engines is commonly sucked into the crank hub area past the crank seal, where it enters your engine and disrupts engine timing. When this occurs, the belt is shredded and clogs engine oil pickup, starving the engine and reducing oil pressure, causing catastrophic engine failure and thousands of dollars worth of damage. VAC Motorsports’ Crank Seal Guards are precision machined for perfect fitment and provide rigidity and maximum protection. We designed our guard with self-locating pilots to perfectly seal the crank hub bore and provide even, minimum clearance around the crank hub. Installation Hardware included. Made in the USA.

Show More Show Less

S55/N55 2 One-Piece PIN CRANK HUB

T#:3729860

Part#: CH-2 PIN

In Stock

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

The Insane Crank Hub kits are designed and manufactured in Lithuania and made from a solid block of thermally absorbed, heat-treated steel and milled on a 5 axis precision CNC machine to create what they believe to be the strongest crank hub kit on the market today!

Show More Show Less

VAC Performance Coated Rod Bearing Kit - Standard Size - S65 ...

T#:1061445

Part#: VAC-HPRBK-S65

Ships in 6 Business Days

$ 799.99 USD

Add to Wish List

Qty

$ 799.99 USD

Add to Wish List

VAC's S65 bearings are embraced by BMW engine builders world wide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical.

Show More Show Less

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 2 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

AutoTecknic Dry Carbon Competition Oil Cap Cover - Type 1 - For Vario...

T#:39971047

Part#: BM-0007

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

Ships in 2 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

2 PIN One-Piece CRANK HUB - N54

T#:3729861

Part#: CH-N54

Ships in 4 Business Days

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

This kit includes all the necessary components to successfully replace the stock OEM crank hub with the single-piece crank hub. The kit now includes Hardened crankshaft damper bolts at no additional charge.

Show More Show Less

FTP Motorsport Low Temp Oil Thermostat - N54/N55

T#:582222

Part#: SG84006

Ships in 1 Business Day

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

This thermostat will open sooner and help to lower the overall oil temperature.

FTP Motorsport Oil Cooler Kit - N54/N55 w/ Factory Oil Cooler ...

For N54/N55 Engines w/ a factory oil cooler

T#:582171

Part#: SG840251007

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The turbocharged E9X 335i is renowned for its excellent performance and the ability to custom tune for more horsepower. Unfortunately, it is also known for oil cooling deficiencies that can reduce horsepower output and potentially compromise engine longevity, especially when driven enthusiastically or when boost is increased. To help maximize the power of your BMW, this FTP Motorsport kit adds a second oil cooler behind the kidney grills in addition to the factory oil cooler. This not only increases the cooling capacity, but more than DOUBLES it! Our kit provides the factory oil cooler with much more airflow then what is available in the fender wells. Only for vehicles with factory oil cooler

Show More Show Less

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MIN...

T#:39971046

Part#: BM-0006-BCG

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.

Show More Show Less

Active Autowerke Power Pulley Kit - E9x M3

For vehicles with production date 2007-5/2008

T#:397285

Part#: 13-001

Ships in 3 Business Days

5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Qty

5% off MSRP

$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD

Add to Wish List

Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.

Show More Show Less

Active Autowerke Supercharger Kit - E9X M3 2008-2013

T#:340094

Part#: AASC-E9XM3

Back Ordered

Starting at $ 9,995.00 USD

Add to Wish List

Starting at $ 9,995.00 USD

Add to Wish List

The advanced design and sleek features of the Active Autowerke Supercharger System include a front mount air-to-air intercooler system with a separate oil cooler for the supercharger unit's independent oil system. The Active Autowerke Supercharger Plenum replaces the factory air box and is designed to have an OEM-type look with custom finishes available at the customer's request. The Active Autowerke Supercharger Plenum has been designed with eight high-flow velocity stacks, and large three-inch intercooler piping to supply cooled air.

Show More Show Less

FTP Motorsport Boost Fitting - N20/N55

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

FTP Thermostat cover kit - N54 3.0L

T#:582056

Part#: SG84006-CT

Special Order: No Guaranteed ETA

$ 50.00 USD

Add to Wish List

Qty

$ 50.00 USD

Add to Wish List

This plate is a simple way to add a bespoke look to your engine bay. If you have replaced your oil thermostat or deleted your cooler, now is the perfect time for this mod. Installs in minutes and ensures a positive seal for the oiling system.

Show More Show Less

FTP Motorsport PCV Valve Upgraded Replacement - N54

T#:583063

Part#: SG84036

Special Order: No Guaranteed ETA

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

The OEM plastic PCV valve does not hold pressure well even when brand new. What this means is that when the turbochargers are making boost, pressurized air can become forced backwards through the valve and back into the crankcase. Depending on the condition of your PCV valve this can range from irritating to dangerous as a pressurized case can cause all sorts of issues. Additionally, if your valve cover is cracked due to age or has a bad gasket you are more than likely experiencing a pressure leak either internally or externally. These two features can cause even a low-mileage N54 to run like a tired elephant, sometimes even unlocking a special bonus function known as "Limp Mode". The solution is to replace any failed components and upgrade the PCV valve to something more capable withstanding the abuse of a turbocharged environment. FTP Motorsport has you covered with this solid aluminum valve assembly. It is essentially the same thing that came in your car from the factory, made out of aluminum. The internal components have also been made to fit tighter and outlast the life of an off the shelf replacement. No, this won't be the very last PCV valve you buy, but it will most certainly alleviate a lot of headaches common to N54 owners. And if you're tuned, big twin or single swapped you need one of these yesterday.

Show More Show Less

N55 N54 Low Oil Temp Thermostat Parts - Type 07

T#:594822

Part#: SG84006-07

Special Order: No Guaranteed ETA

$ 54.00 USD

Add to Wish List

Qty

$ 54.00 USD

Add to Wish List

Active Autowerke Rotrex Traction Fluid - 1 Liter

T#:57616348

Part#: RTF-1L

Ships in 3 Business Days

7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Qty

7% off MSRP

$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

E9X 335i/xi N54 Stage 1+ Turner Power Package

10X Entries Into Our F80 M3 Sweepstakes

T#:224335

Part#: TMS224335

Ships in 2 Business Days

$ 1,684.00 USD

Add to Wish List

Qty

$ 1,684.00 USD

Add to Wish List

2007-2010 E90/E92/E93 335i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer

More power = more heat. It's easy to make more power one time but to continue making that power consistently requires careful planning and design. With the additional boost the air entering the engine is also warmer, making the intercooler more important than ever. In testing, the stock BMW intercooler was quickly overwhelmed and cannot keep the intake air cool enough. The engine computer recognizes that and dials back the boost. A more efficient intercooler will keep boost levels up, delivering consistently higher boost levels. The Stage 1+ package includes a Wagner Evo I plug and play intercooler upgrade. We get great feedback from our customers and technicians about the Wagner FMIC - it's a direct bolt in part using all of the factory piping and it offers 85% more surface area than the factory intercooler.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package

Show More Show Less

Active Autowerke - S65 Gen2 Supercharger Kit (Level 3/ 700HP)- E9X M3...

T#:397305

Part#: 12-030

Ships in 10 Business Days

5% off MSRP $ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Qty

5% off MSRP

$ 18,749.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 17,811.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 700 horsepower and 480 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Nov 2, 2026

$ 303.99 USD

Add to Wish List

Qty

$ 303.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.

Active Autowerke - S65 Gen2 Supercharger Kit (Level 2/ 640HP)- E9X M3...

T#:397304

Part#: 12-029

Ships in 10 Business Days

5% off MSRP $ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Qty

5% off MSRP

$ 16,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15,436.99 USD

Add to Wish List

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 640 horsepower and 413 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Show More Show Less

Active Autowerke - S65 Power Pulley DPK Belt Kit - E9X M3

For vehicles with production date from 6/2008

T#:50934275

Part#: 13-001D

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Free Up Real S65 Power — Engineered the Turner Way Your S65 is already making the power. This kit simply lets you keep more of it. The Active Autowerke Power Pulley Kit for the BMW E9X M3 reduces parasitic drag at the crankshaft, trimming rotational mass and freeing up horsepower that would otherwise be consumed by accessory drive load. The result is a measurable increase in rear-wheel output without sacrificing the balance, cooling capacity, or long-term durability expected from a properly engineered BMW upgrade. The crank pulley is CNC-machined from billet 6061 aluminum and finished with a hard-coat anodize for durability under sustained high-RPM operation. Unlike undersized pulleys that compromise system function, this design maintains proper operating characteristics while delivering real-world gains. Late-2007 production E9X M3 models transitioned to a double-sided (DPK) A/C belt configuration. Rather than forcing a workaround, Active Autowerke developed a proper DPK-compatible solution — including the correct matched belt. Applicable kits also include a spare DPK belt for added insurance. Dyno testing on a Mustang chassis dyno confirms gains of 10–12+ rear-wheel horsepower on an otherwise stock vehicle. Installation is fully reversible and requires no permanent modification. Product Highlights 10–12+ RWHP gain verified on stock S65 engines Complete bolt-on system CNC-machined 6061 billet aluminum crank pulley Hard-coat anodized finish for durability Includes correct replacement drive and A/C belts Spare DPK belt included where applicable Compatible with manual and DCT-equipped E9X M3 Reduces parasitic drag and rotational mass Designed to maintain proper operating temperatures Works in conjunction with Active Autowerke performance software Available for single-sided and double-sided (DPK) belt configurations Fitment Information Confirm whether your E9X M3 is equipped with a single-sided or double-sided (DPK) A/C belt prior to ordering to ensure correct application. A properly engineered solution for enthusiasts who want measurable gains while preserving OEM-level refinement and reliability.

Show More Show Less

VAC MOTORSPORTS PREMIUM STROKER KIT, BMW S65, 4.4L/4.5L/4.6L/4.7L - I...

T#:16840476

Part#: SKS65ST2941151S

Ships in 2 Business Days

$ 11,988.99 USD

Add to Wish List

Qty

$ 11,988.99 USD

Add to Wish List

Active Autowerke Supercharger Kit Gen 2 Level 4 - E9X M3 S65 4.0L ...

T#:57616347

Part#: 12-032-C38

Ships in 10 Business Days

$ 23,749.00 USD

Add to Wish List

Qty

$ 23,749.00 USD

Add to Wish List

The Active Autowerke Supercharger System is powered by a Rotrex C38-92R Supercharger Unit mounted with a custom CNCed bracket that uses a dedicated drive belt system, while eight high flow fuel injectors are used to supply the additional required fuel. Active Autowerke's Performance Software, available for 91-93 octane, race gas, and octane levels unique to other countries, is carefully calibrated, and is at the heart of the system to provide an unparalleled driving experience. Keeping within the factory's OBDII parameters, the Active Autowerke Supercharger System ensures consistency for everyday driving. The Level 4 system includes a water/methanol injection system with upgraded pulley and custom software.

Show More Show Less