BMW Fuel System Parts for BMW 3 Series E93 (2007-2013)

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Bucketed Low-Pressure Fuel Pump Kit - Stage 2.5v2 - BMW E9X E8X ...

T#:1165728

Part#: 601-0177

In Stock

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 550whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Bav Auto Fuel Injector Removal/Installation Tool - N55

For E - Chassis N55

10X Entries Into Our F80 M3 Sweepstakes

T#:580388

Part#: B8800075

Ships on Feb 26, 2027

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD

Add to Wish List

This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

10X Entries Into Our F80 M3 Sweepstakes

T#:580445

Part#: B8800140

In Stock

Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD

Add to Wish List

This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

Ships in 6 Business Days

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 9 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

T#:1316810

Part#: 601-0015

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW 3 Series E93 (2007-2013)

Sub-Categories

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

Bucketed Low-Pressure Fuel Pump Kit - Stage 2.5v2 - BMW E9X E8X ...

Bav Auto Fuel Injector Removal/Installation Tool - N55

Bav Auto Fuel Injector Seal Installer & Remover - N54/N63

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results