Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
04-06-2026
This is a replacement LEFT tie rod assembly for BMW E82 (except 1M), E9X RWD models (except M3), E84 X1 28i, and E89 Z4. This is a complete assembly including the outer and inner ball joints.
Connected to the steering rack, when these begin to go, there is often slack in the steering or popping ball joints. This could end up leading to extremely hazardous conditions and lead to loss of steering control.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2013+ E84 BMW X1 28i RWD
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
This product was last offered at the strikethrough price on
05-07-2026
This is a replacement RIGHT tie rod assembly for BMW E82 (except 1M), E9X RWD models (except M3), E84 X1 28i, and E89 Z4. This is a complete assembly including the outer and inner ball joints.
Connected to the steering rack, when these begin to go, there is often slack in the steering or popping ball joints. This could end up leading to extremely hazardous conditions and lead to loss of steering control.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2013+ E84 BMW X1 28i RWD
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
ECS Tuning Steering Rack Spacers – A Simple Upgrade for More Angle
Whether you're just beginning your drift journey or looking to refine your current angle kit, ECS Tuning's Steering Rack Spacers offer a simple yet effective solution. Installation is straightforward—just remove the inner tie rods and place the spacers with the chamfered side facing the tie rod for an instant angle boost.
During the development of their ECS E90 drift build, the team at ECS Tuning was eager to hit the track and start testing. On the first day of driving, it quickly became apparent that two essential upgrades were needed: a welded differential (which led to the creation of their custom-fit differential plates – (T#:35121162) and increased steering angle. However, rather than jumping straight into a full-angle kit, ECS focused on incremental improvements to fine-tune the car’s handling.
ECS engineers, including a beginner drifter, carefully measured and tested different spacer sizes to optimize angle while maintaining proper thread engagement on the inner tie rod. After extensive testing, they determined that 5mm was the sweet spot—providing the extra angle needed while ensuring a strong and secure connection.
For those looking to enhance their drift setup without committing to an expensive angle kit, ECS Steering Rack Spacers offer an affordable and effective solution.
Key Benefits:
Gain approximately 5° of extra steering angle on an otherwise stock setup
Budget-friendly alternative to expensive angle kits
Simple, bolt-on installation—no major modifications required
Works as a standalone mod or can be paired with angle kits for even greater gains
Design & Materials:
Material: Mild Steel
Finish: Zinc Coated for durability
Size: 5mm spacers
Take your drifting to the next level—one small upgrade at a time with ECS Tuning’s Steering Rack Spacers!
This product was last offered at the strikethrough price on
05-07-2026
This product was last offered at the strikethrough price on
01-26-2026
Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This product was last offered at the strikethrough price on
04-06-2026
Steering rack boots often crack and split over time revealing internals to potential corrosion or damage. Replace yours to ensure long steering rack and steering component life.
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Replacement steering rack boot includes 1 boot and 2 boot clamps. We recommend inspecting these boots while replacing tie rods or control arms. If these are cracked or damaged you should replace them. Sold individually.
This item fits the following BMWs:
2008+ E82 BMW 128i 135i 135is 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2013+ E84 BMW X1 xDrive28i X1 xDrive35i