Enthusiast Bundles for BMW 3 Series E93 (2007-2013)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Scan Tool with Digital Circuit Tester | Professional BMW/MINI/Rolls Royce Elite is a comprehensive diagnostic solution designed to meet the needs of enthusiasts and professionals alike. This advanced tool combines an elite scan tool with a precise digital circuit tester to offer unparalleled diagnostic capabilities for BMW, MINI, and Rolls Royce vehicles.

BMW/MINI Elite Scan Tool Features:

• Extensive Compatibility: Works with BMW models from 1987 to current, and MINI models from 2002 to current.
• OBDII/EOBD Compliance: Fully compatible with global OBDII/EOBD standards for universal diagnostics.
• Code Management: Reads and clears codes, turns off SES/CEL/MIL/DTC, and supports BMW-specific powertrain, chassis, body, and CAN codes.
• Advanced Diagnostics: Includes special troubleshooting functions, live sensor data recording, live data graphing, and custom data streams.
• Active Tests: Performs active tests, special functions, coding, and security access.
• Adaptations & Resets: Reads and resets adaptations, resets oil service lights, sets inspection intervals, and deactivates/reactivates brake control systems.
• User-Friendly Interface: Features a large TFT color screen, multilingual menu options, memory card for data backup, and free lifetime updates.

Digital Circuit Tester Features:

• Versatile Voltage Compatibility: Supports 6V, 12V, and 24V systems for broad diagnostic capabilities.
• CE Approved: Ensures safety and accuracy for complex circuit testing.
• Extended Reach: 12-foot coil cord allows for easy maneuverability in tight spaces.
• Pinpoint Accuracy: Provides real-time voltage readings with clear LCD indicators for power and ground.
• Universal Compatibility: Standard 4mm banana jacks for easy integration with existing tools.

Included:

• Digital circuit tester
• Piercing probe
• Long probe
• Small probe

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See http://www.p65warnings.ca.gov for further information.

TORX SCREWDRIVER SET:

Handy Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners. Large grips add comfort and leverage. Handle through-holes make them easy to hang from pegboard hooks.

Entire kit packaged in a convenient molded case.

Sizes include: T10, T15, T20, T25, T27, and T30.

STANDARD SCREWDRIVER SET:

Elevate your craftsmanship with the Schwaben 6 Piece Screwdriver Set!

Crafted with precision and durability in mind, these professional-grade screwdrivers stand the test of time, ensuring reliable performance for countless projects.  Constructed from robust nickel chrome moly, these screwdrivers are built to endure rigorous use, making them reliable companions for various tasks. That's why it's backed by our LIFETIME REPLACEMENT program - because we want this set to stick with you as long as you need it to!

Features:

• Color-Coded Brilliance: Effortlessly switch between flat head and Philips heads, thanks to the intuitive color-coded design. Enhance efficiency and eliminate guesswork.
• Comfortable Control: Experience fatigue-free operation with the ergonomic handles, offering both comfort and precision for intricate tasks.
• Organized Housing: Housed in a molded tray, these commonly used screwdriver sizes are easily portable and organized, reducing the hassle of rummaging through toolboxes.
• Essential Sizes: Curated for versatility, the set includes sizes catering to delicate tasks and robust projects, covering all your needs.

Includes:

• 5.5x100mm flat head screwdriver

• 6.5x150mm flat head screwdriver

• 8x175mm flat head screwdriver

• #1x75mm Phillips screwdriver

• #2x100mm Phillips screwdriver

• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

2-IN-1 CREEPER SEAT:

The Schwaben 2 in 1 Creeper Seat is a versatile tool designed to enhance convenience in various maintenance tasks. Easily switch from a creeper to a stool, providing flexible options for different work scenarios. As a creeper, it allows you to slide effortlessly under your vehicle, while as a stool, it offers a comfortable seating option for low-height work, reducing strain on your back and knees.

This creeper seat features a thick, padded seat with a large vinyl cushion that remains soft and supportive. The headrest ensures comfort during extended use, and the waterproof, oilproof surface makes cleaning easy. Equipped with six 360° universal casters, it moves smoothly across different surfaces. The ball-bearing casters are compression and wear-resistant, ensuring easy maneuverability.

Constructed from thickened tubular steel, the Schwaben 2-in-1 Creeper Seat supports up to 330 lbs (150 kg), providing a sturdy and reliable platform. In stool mode, the robust frame prevents deformation, rolling, or tilting, ensuring stability.

With a ground clearance of only 3 inches, this creeper seat allows access to narrow, low-clearance spaces, making it ideal for garages and repair shops. Enjoy the convenience of switching between a creeper and a stool, and experience improved comfort and efficiency in your maintenance projects.

Key Features:

• Creeper/Stool All-in-One: Easily converts from a creeper to a stool for versatile maintenance tasks.
• Heavy-Duty Construction: Supports up to 330 lbs (150 kg) with a thickened tubular steel frame; prevents deformation, rolling, or tilting in stool mode.
• Smooth Movement: Six 360° universal casters ensure smooth and flexible movement on various surfaces; ball-bearing casters are compression and wear-resistant.
• Low Ground Clearance: Only 3 inches, allowing access to narrow and low-clearance spaces, perfect for garages and repair shops.
• Comfortable Padded Seat: Thick vinyl cushion with a headrest for extended use without fatigue; waterproof and oilproof for easy cleaning.
• Enhanced Efficiency and Comfort: Reduces strain on the back and knees, making it ideal for both routine maintenance and complex repairs.

Includes:

• 1 x Creeper Rear Frame
• 1 x Creeper Middle Frame
• 1 x Creeper Headrest
• 6 x Swivel Casters
• 6 x Washers
• 4 x M8x55 Hex Head Bolts
• 4 x M8 Lock Nuts

1/2" DRIVE METRIC SOCKET SET:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Turner Motorsport introduces the Wheel & Tire Package, eliminating the hassle of purchasing tires separately and waiting for mounting and balancing.

Key Benefits:

• Complete package for convenience and savings.
• Lightweight rotary formed wheels offer enhanced durability.
• Cost-effective alternative to fully forged wheels.
• Suitable for both street and track use.
• Stylish design featuring engraved billet center caps.

Specifications:

• Size: 19"x9.5"
• Offset: 35mm
• Center Bore: 72.6mm
• Bolt Pattern: 5x120
• Color: Matte Gunmetal
• Weight: 24 lbs. Each
• Tires: Ironman iMOVE Gen 3 AS - 265/30ZR19
• Ultra High Performance All-Season
• Service Desc: 93W
• Load Range: XL
• UTQG: 380AA

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T1000 TPMS SERVICE TOOL:

The FOXWELL T1000 TPMS Service Tool is designed to to activate OEM/Universal TPMS sensors, retrieve TPMS sensor data (sensor ID, tire pressure, temperature, battery condition and OE part number), relearn 98% sensor IDs, program FOXWELL T10-sensor to replace bad sensors and test Remote Keyless Entry Key Fobs.

Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors: Copy by Activation; Manual Create; Auto Create
• 3 TPMS Relearning Methods: Self learning; indirect learning; static learning.
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Protective Blow Molding Box: Prevent your scanner from damage

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors to meet the specifications of a particular vehicle before new sensor installation and relearn. 3 different sensor programming methods are supported by the FOXWELL T1000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: T1000 will only program a replacement sensor if it is a FOXWELL T10 sensor.)

• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you could input the ID to program new sensor.
• Auto Create 1-16 Sensors
  • If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Install new sensor ID--program new sensor-->perform TPMS learning and let the car recognize new sensor 

The FOXWELL T1000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 99% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types for TPMS sensor relearning are offered: 1) self learning; 2) indirect learning; 3) static learning. These 3 learning methods will be easy to operate because the instructions of the scanner is fairly clear and intuitive.

• Self Learning:
  • T1000 provides the easy relearn procedure instruction to simplify the auto-relearn process if your vehicle is able to learn single or multiple TPMS sensor IDs. For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own.
• Indirect Learning:
  • This method can only be operated in the car. When you don't have tire pressure sensors, the T1000 TPMS relearn tool will provides a learning method to operate in the car to reset the tire pressure light. The learning method will vary from each vehicle.
• Static Learning:
  • T1000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool T1000.

Notice:

• FOXWELL T1000 doesn't support OBD relearn. It is not compatible with any OBD function.
• If you need to perform sensor cloning function, you should know your old sensor ID first. If not, you could use another scanner to scan the old sensor ID first, then use FOXWELL T1000 to perform sensor cloning.

RUBBER T10 TPMS SENSORS:

The Foxwell TPMS sensor integrates 315MHz and 433MHz dual frequency and can replace more than 96% of the OEM sensors on the market. Sensors can easily be activated and programmed by any TPMS tool on the market. 

Features:

• Rubber valve stem.
• 315MHz and 433MHz dual frequency.
• High precision air valve to avoid air leakage.
• 0-30 degree adjustability. 
• Build in battery with an extended service life (more than 5 years)
• Temperature reading range -40F - 257F
• Pressure monitoring range 0 to 130.53psi
• Weight - 12G

Turner Motorsport brings you the ultimate convenience with their Wheel & Tire Package, putting an end to purchasing tires separately and waiting for mounting and balancing. When selecting wheels for your BMW, it's essential to consider factors such as weight, construction method, and durability. Turner Motorsport presents ECS Tekniform Wheels, striking the perfect balance between lightweight design and robustness, offering a cost-effective alternative to fully forged wheels. These wheels, with their rotary formed construction, deliver durability without breaking the bank, making them ideal for both street and track use. With their attractive appearance and engraved billet center caps, Tekniform wheels elevate the aesthetic of your BMW while ensuring exceptional performance.

Key Benefits:

• Convenient Wheel & Tire Package eliminates the need for separate purchases.
• Lightweight rotary formed wheels offer enhanced durability.
• Cost-effective alternative to fully forged wheels.
• Suitable for both street and track use.
• Stylish design featuring engraved billet center caps.

Specifications:

• Size: 19"x9.5"
• Offset: 43mm
• Center Bore: 72.6mm
• Bolt Pattern: 5x120
• Color: Hyper Silver
• Weight: 24 lbs. Each
• Tires: Ironman iMOVE Gen 3 AS - 265/30ZR19
• Ultra High Performance All-Season
• Service Desc: 93W
• Load Range: XL
• UTQG: 380AA

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!

Refresh and upgrade your front intercooler to ensure you are supplying your engine with the maximum amount of airflow. With the added charge pipe and BOV kit you can drive confidently knowing the plastic charge pipe is replaced with a much stronger metal alternative with added blow off valve for a full performance and sound upgrade!

OEM+ Upgraded Front Mount Intercooler:

Upgrade your N54/N55 performance effortlessly with this "OEM+" Intercooler from ECS Tuning! This premium intercooler is engineered to deliver superior cooling efficiency and increased horsepower without the hassle of extensive bumper/core support modifications.

Key Features:

Enhanced Core Depth: Featuring a robust aluminum bar and plate core, this intercooler ensures optimal heat dissipation for peak performance.
Durable Construction: TIG-welded cast aluminum end tanks provide unmatched durability, replacing the factory's plastic components.
Perfect Fitment: Designed to fit just like the OEM unit, it requires no additional brackets or modifications to the bumper or core support.
Compatibility: Works seamlessly with OE charge pipes and pipe connectors for easy installation.
Benefits:

Improved Cooling Efficiency: Significantly lowers intercooler outlet temperatures, ensuring your engine runs cooler and more efficiently.
Increased Durability: Aluminum end tanks offer enhanced durability and longevity compared to factory plastic construction.
Hassle-Free Installation: No need for trimming the front bumper or modifying the radiator support, making installation straightforward.
Whether you're after increased performance or an OEM purist, the ECS Tuning OEM+ Intercooler is the perfect upgrade for your BMW. Enjoy the benefits of increased horsepower and lower temperatures with an easy, hassle-free installation.

N54 Chargepipe and BOV Kit:

All of the tuning in the world is only as good as the weakest link. More boost in your 135/335 is great! But you will soon learn that some of the factory hardware is not up to the task of handling that extra pressure. One of the first things to fail and cause a boost leak are the factory boost diverter valves. This allows boost to "leak" out of the intake stream and a loss of power from the engine. This ECS Tuning chargepipe upgrade includes a blow-off valve in place of the factory diverter valves. The BOV is higher quality than the diverter valves and will exit intake air to the outside instead of putting it back through the turbo system (which will reduce strain on the turbos). This aluminum chargepipe is also much more robust than the stock plastic factory pipe and the connection to the throttle body is stronger, eliminating another failure point of the stock pipe.

Built-in 1/8" NPT ports allow you to run an additional methanol injection kit (bungs included if you don't want use the ports).

This is a complete kit that includes everything you need to replace the factory chargepipe and diverter valves -

powedercoat chargepipe
ECS Tuning blow-off valve
multiple BOV springs to suit your vacuum/boost needs
vacuum plugs for the stock diverter valve hoses
silicone hose connection to intercooler piping
all hardware and hose clamps with instructions

1/4" DRIVE METRIC SHALLOW SOCKET SET - 13 PC:

The Schwaben 1/4" Drive 6 Point Socket Set is comprised of thirteen 1/4" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/4" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm
• 4.5 mm
• 5 mm
• 5.5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm

3/8" DRIVE METRIC SHALLOW SOCKET SET - 12 PC:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT

1/2" DRIVE METRIC SHALLOW SOCKET SET - 12 PC:

The Schwaben 1/2" Drive 6 Point Socket Set comprises a dozen 1/2" metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Socket Set and confidently tackle any task at hand.

Features:

• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

1/4" DRIVE METRIC DEEP SOCKET SET - 13 PC:

The Schwaben 1/4" Drive 6 Point Deep Socket Set is comprised of thirteen 1/4" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 50mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/4" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 50mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm
• 4.5 mm
• 5 mm
• 5.5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm

3/8" DRIVE METRIC DEEP SOCKET SET - 12 PC:

The Schwaben 3/8" Drive 6 Point Deep Socket Set comprises a dozen 3/8" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 3/8" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm

1/2" DRIVE METRIC DEEP SOCKET SET - 12 PC:

The Schwaben 1/2" Drive 6 Point Deep Socket Set comprises a dozen 1/2" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 76mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/2" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

• Access Tight Spaces: These deep sockets, measuring 76mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.
• Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.
• Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.
• Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.
• High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.
• Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.
• Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 10 mm
• 12 mm
• 13 mm
• 14 mm
• 15 mm
• 16 mm
• 17 mm
• 18 mm
• 19 mm
• 21 mm
• 22 mm
• 24 mm

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Universal 40 Piece Metric Socket Set includes all of the necessary tools to create a socket set by purchasing only one ratchet. The included 3/8-inch drive flex head ratchet and two female 3/8-inch drive adapters will allow you to use 3 different drive sizes of sockets: 1/4", 3/8", and 1/2"! Use this kit to help complete your tool kit until you decide to purchase more ratchet sizes, and when you do, you don't have to get rid of any of these tools to do so, which is possible with the adapters.

And of course, this kit is included in our LIFETIME REPLACEMENT program!

Includes:

• 4 mm (1/4" Drive)
• 4.5 mm (1/4" Drive)
• 5 mm (1/4" Drive)
• 5.5 mm (1/4" Drive)
• 6 mm (1/4" Drive)
• 7 mm (1/4" Drive)
• 8 mm (1/4" Drive and 3/8" Drive)
• 9 mm (1/4" Drive and 3/8" Drive)
• 10 mm (1/4" Drive, 3/8" Drive, and 1/2" Drive)
• 11 mm (1/4" Drive and 3/8" Drive)
• 12 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 13 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 14 mm (1/4" Drive and 3/8" Drive, and 1/2" Drive)
• 15mm (3/8" Drive and 1/2" Drive)
• 16mm (3/8" Drive and 1/2" Drive)
• 17mm (3/8" Drive and 1/2" Drive)
• 18mm (3/8" Drive and 1/2" Drive)
• 19mm (3/8" Drive and 1/2" Drive)
• 21mm (1/2" Drive)
• 22mm (1/2" Drive)
• 24mm (1/2" Drive)

4 DRAWER TOOL CART:

The 27 Inch 4 Drawer Tool Cart is built to meet the demands of both professionals and hobbyists alike. With a sleek black powder coat finish, this tool cart is as stylish as it is durable, offering long-lasting performance and good looks.

Key Features:

• Sleek & Durable Finish: The black powder coat finish not only looks great but also protects the cart from wear and tear.
• Easy Mobility: Glide effortlessly around your workspace with 5-inch rubber caster wheels, two of which are locking for secure placement.
• Organized & Secure Storage: Keep your tools neatly organized and secure, whether you’re at the track or in your garage.
• Solid Construction: Built with strength and durability to withstand the rigors of daily use.
• Versatile Utility: Designed to work as hard as you do, making it an ideal choice for any garage or workshop.

Specifications:

• Top Compartment: 27" x 15-3/8" x 2" Capacity: 200lbs
• Top Drawers: 12-1/4" x 14-1/2" x 2" Capacity: 30lbs each
• Middle Drawer: 26-3/4" x 14-1/2" x 2-3/4" Capacity: 50lbs
• Bottom Drawer: 26" x 14-1/2" x 3-7/8" Capacity: 70lbs
• Bottom Tray: 30-1/4" x 16" x 3" Capacity: 200lbs
• Overall Height: 38"

PORTABLE 3 DRAWER TOOL BOX:

The 20" Portable 3 Drawer Tool Box offers the perfect blend of portability, durability, and secure storage for your tools. With a compact yet spacious 20.5" x 9" x 13" design, this tool box is built to keep your tools organized and easily accessible whether you're on the go or working in your garage.

Key Features:

• 3-Drawer Design: Organize your tools with three full-extension drawers that glide smoothly on ball bearing slides, each measuring 17.5" x 7.5" x 2".
• Portability & Convenience: Lightweight construction and a sturdy carrying handle make this tool box easy to transport wherever you need it.
• Durable Finish: The black powder coat finish, combined with rust-resistant latches, ensures long-lasting good looks and protection.
• Secure Storage: Keep your tools safe with the included lock and keys, providing peace of mind whether at home or on the job site.
• Additional Storage: Extra space under the lid is perfect for storing larger hand tools, maximizing your storage capacity.
• Heavy-Duty Construction: Built to last with 16-gauge heavy-duty steel, this tool box is designed to withstand the rigors of daily use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

27 INCH 4 DRAWER TOOL CART:

The 27 Inch 4 Drawer Tool Cart is built to meet the demands of both professionals and hobbyists alike. With a sleek black powder coat finish, this tool cart is as stylish as it is durable, offering long-lasting performance and good looks.

Key Features:

• Sleek & Durable Finish: The black powder coat finish not only looks great but also protects the cart from wear and tear.
• Easy Mobility: Glide effortlessly around your workspace with 5-inch rubber caster wheels, two of which are locking for secure placement.
• Organized & Secure Storage: Keep your tools neatly organized and secure, whether you’re at the track or in your garage.
• Solid Construction: Built with strength and durability to withstand the rigors of daily use.
• Versatile Utility: Designed to work as hard as you do, making it an ideal choice for any garage or workshop.

Specifications:

• Top Compartment: 27" x 15-3/8" x 2" Capacity: 200lbs
• Top Drawers: 12-1/4" x 14-1/2" x 2" Capacity: 30lbs each
• Middle Drawer: 26-3/4" x 14-1/2" x 2-3/4" Capacity: 50lbs
• Bottom Drawer: 26" x 14-1/2" x 3-7/8" Capacity: 70lbs
• Bottom Tray: 30-1/4" x 16" x 3" Capacity: 200lbs
• Overall Height: 38"

5 GALLON PARTS WASHER:

The 5 Gallon Parts Washer is an essential tool for anyone needing to clean and degrease small parts with precision and efficiency. Designed with a compact footprint, this washer is perfect for saving space on your workbench while still providing the cleaning power you need.

Key Features:

• Essential Cleaning Tool: Perfect for cleaning and degreasing small parts, ensuring they’re free of dirt and grime.
• Compact Design: Saves valuable workbench space, making it ideal for small projects and tight workspaces.
• Removable Tray: Provides versatility and ease during clean-up, allowing you to work more efficiently.
• Durable Construction: Powder-coated finish with the Texas Speed & Performance logo ensures long life and great looks.
• 5 Gallon Capacity: Holds 3 gallons of cleaning solution, meeting most small parts cleaning needs.
• Water-Based Degreaser Only: Designed for use with water-based degreasers, ensuring safe and effective cleaning.

Specifications:

• Dimensions: 17.25" x 13.25" x 9"
• Tool Depth: 4"

3 DRAWER TOOLBOX ROLLER SEAT:

Elevate your workspace efficiency with the Texas Speed 3 Drawer Toolbox Roller Seat. Designed for serious hobbyists and professionals alike, this versatile seat combines comfort, storage, and mobility. The integrated 3-drawer toolbox with ball-bearing slides keeps your essential tools organized and within arm’s reach, while the two folding tool trays with magnetic pads offer additional space for quick access to your most-used items.

The vinyl padded seat cushion ensures maximum comfort and support during extended periods of work, making it ideal for brake and body repair, cleaning, and detailing projects. Built with a durable black painted steel body proudly displaying the TSP logo, this roller seat is as sturdy as it is stylish. 

Featuring four 2 1/2 inch easy-rolling rubber swivel casters, the seat glides smoothly across your workspace, allowing you to move effortlessly between tasks. The rear tray supports screwdrivers and pliers, keeping them handy for when you need them most.

Key Features:

• 3-Drawer Storage: Integrated tool box with ball-bearing slides.
• Additional Workspace: Two folding tool trays with magnetic pads.
• Comfort and Support: Vinyl padded seat cushion.
• Tool Organization: Rear tray supports screwdrivers and pliers.
• Load Capacity: Supports up to 350 pounds.

Additional Specifications:

• 16 in. x 9 in. x 2 1/4 in. thick seat pad
• (4) 2 1/2 in. easy rolling rubber swivel casters
• Overall Dimensions: 26 3/8 in. L x 14 1/8 in. W x 16 in. H
• Drawer Dimension: 13 1/2 in. L x 7 3/4 in. W x 2 1/4 in. D
• Load Limit: 350 pounds

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

• Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
• Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
• Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
• Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
• Large Base: Equipped with a 7-inch diameter base for enhanced stability.
• Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Enhance your BMW's performance and style with Turner Motorsport's Wheel & Tire Package, eliminating the hassle of purchasing tires separately and waiting for mounting and balancing.

Key Benefits:

• Convenient package includes tires and wheels, saving time and effort.
• Lightweight rotary formed wheels offer durability and performance.
• Cost-effective alternative to fully forged wheels.
• Ideal for street or track use, providing enhanced durability.
• Stylish design with engraved billet center caps.

Specifications:

• Size: 18"x8.5"
• Offset: 30mm
• Center Bore: 72.6mm
• Bolt Pattern: 5x120
• Color: Matte Gunmetal
• Lug Seat: Ball Seat
• Weight: 23 lbs. Each
• Tires: Ironman iMOVE Gen 3 AS - 255/35ZR18
• Ultra High Performance All-Season
• Service Desc: 94W
• Load Range: XL
• UTQG: 380AA