BMW 7 Series F01 (2009+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit - Level 2 - BMW GA6HP19Z Transmiss...
For vehicles equipped with automatic transmission GA6HP19Z *** Check Transmission Type Prior To Orde
Packaged by Turner - Corporate Logo
T#:5376301
Part#: 24117571217TMSKT
In Stock
Sale - Save 10% $ 175.99

This product was last offered at the strikethrough price on
05-03-2026

$ 157.62 USD
Free Shipping
Sale - Save 10%
$ 175.99

This product was last offered at the strikethrough price on
05-03-2026

$ 157.62 USD
Free Shipping
Includes all the necessary components for a complete transmission service with Liqui Moly fluid Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 quarts Liqui Moly automatic transmission fluid
Show More Show Less
Automatic Transmission Service Kit
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 23% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Sale - Save 23%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 166.09 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580353
Part#: B8800025
In Stock
Sale - Save 25% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.74 USD
Free Shipping on orders $49 and up
The proper size for removing BMW drain plugs.

Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Bav Auto Tools - Corporate Logo
T#:580339
Part#: B8800007
Ships on Sep 1, 2026
Sale - Save 25% $ 28.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 28.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.74 USD
Free Shipping on orders $49 and up
Remove door panels, trim, etc., with ease... without scratches. This 5-piece, double-ended, pry tool kit is made of impact-resistant nylon that doesn't scratch paint or mar parts like metal pry tools and screwdrivers. Great for door and window repairs, emblems, mouldings, etc.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:4799665
Part#: THERMINSTALLKT
In Stock
Sale - Save 6% $ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 22.99

This product was last offered at the strikethrough price on
06-15-2026

$ 21.64 USD
Free Shipping on orders $49 and up

BMW N54 N55 S55 Mosselman Thermostat Installation Kit is designed to ensure a seamless installation of the Mosselman thermostat on BMW engines. This comprehensive kit from Turner Motorsport includes all necessary gaskets and components, guaranteeing a reliable and precise installation for optimal engine performance.

  • Complete Kit: Includes all essential gaskets and components required for a hassle-free thermostat installation.
  • Optimal Performance: Ensures proper installation of the Mosselman thermostat, leading to improved engine cooling efficiency and performance.
  • High-Quality Components: Gaskets and parts are manufactured to meet high standards of durability and reliability.
  • Precision Fit: Engineered to match OEM specifications, providing a perfect fit and reliable performance.
  • Ease of Installation: All necessary parts are included, simplifying the installation process and reducing the need for additional purchases.

Upgrade your BMW's cooling system with the Mosselman Thermostat Installation Kit from Turner Motorsport, ensuring a top-quality, reliable setup for your engine.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:21702986
Part#: F0XF1XCOOLANTKT
In Stock
Sale - Save 23% $ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 273.89

This product was last offered at the strikethrough price on
05-03-2026

$ 210.61 USD
Free Shipping on orders $49 and up
Elevate your F0X / F1X turbocharger performance and reliability with the Packaged by Turner Kit, meticulously designed to cater to your needs. Benefit from Enhanced Turbocharger Functionality: Improved Cooling: Our Turbocharger Coolant Supply and Return Lines are engineered to enhance coolant circulation, effectively regulating turbocharger temperatures for optimal performance. Precision Fit: Included gasket rings and hose clamps guarantee a snug and secure fit, preventing leaks and ensuring the longevity of your turbocharger system. Enhanced Reliability: By preventing coolant leaks and maintaining consistent temperatures, our kit promotes the reliability and durability of your turbocharger system, ultimately extending its lifespan. Kit Includes: Turbocharger Coolant Return Line - Cylinders 1-4 Turbocharger Coolant Supply Line - Cylinders 1-4 Turbocharger Coolant Return Line - Cylinders 5-8 Turbocharger Coolant Supply Line - Cylinders 5-8 8 Gasket Ring 3 Hose Clamp This kit fits these BMW models: F01/F02 - 750i, 750Li F06/F12/F13 - 650i F07/F10 - 550i
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:578659
Part#: B3300000
In Stock
Sale - Save 3% $ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.33 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 21.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.33 USD
Free Shipping on orders $49 and up

Differential Fluid Extraction Adapter is an essential tool for efficiently draining and refilling differential fluid, ensuring your vehicle's differential system remains in optimal condition. Designed to work with most extraction pumps, this adapter simplifies maintenance tasks, making it easier to service your differential without the mess or hassle of traditional methods.

  • Efficient fluid extraction: Allows for quick and clean draining of differential fluid.
  • Versatile compatibility: Works with most extraction pumps, offering flexibility for various vehicle makes and models.
  • Hassle-free maintenance: Simplifies the process of refilling and draining differential fluid, reducing time and effort.
  • Durable construction: Built from high-quality materials to withstand frequent use and harsh conditions.
  • Easy installation: Designed for a secure fit and easy attachment to extraction pumps.

This Differential Fluid Extraction Adapter is a must-have for any vehicle owner looking to maintain the longevity and performance of their differential system.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.23 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Genuine BMW - Corporate Logo
T#:170039
Part#: 83222220445
In Stock
Sale - Save 5% $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.94 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 40.99

This product was last offered at the strikethrough price on
06-25-2026

$ 38.94 USD
Free Shipping on orders $49 and up
This Genuine BMW ATF is for use in 6 speed automatic ZF transmissions and meets Shell M1375.4 specifications.
Genuine BMW - Corporate Logo
T#:34252
Part#: 11337559794
In Stock
Sale - Save 6% $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.83 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 54.99

This product was last offered at the strikethrough price on
06-15-2026

$ 51.83 USD
Free Shipping on orders $49 and up


Genuine BMW Roller Drag Lever - "3"
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less


Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
In Stock
Sale - Save 23% $ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Sale - Save 23%
$ 96.85

This product was last offered at the strikethrough price on
05-03-2026

$ 74.70 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 9% $ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 9%
$ 157.33

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580359
Part#: B8800032
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
This new funnel is specifically designed to attach to the valve cover preventing oil spills. The 1/4 turn base locks securely in place and alleviates the issue other funnels have impacting the internal baffle of the cylinder head. It has a plastic base and a plastic body.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
In Stock
Sale - Save 15% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD
Free Shipping
Sale - Save 15%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 169.24 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:25772568
Part#: 11127565284MTKT
In Stock
Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580446
Part#: B8800141
In Stock
Sale - Save 25% $ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 36.99

This product was last offered at the strikethrough price on
05-03-2026

$ 27.74 USD
Free Shipping on orders $49 and up
Drain plug socket set. Set of 3 hex-head sockets make removal of transmission and differential drain plugs so much easier. Includes 10mm, 14mm and 17mm sizes. 3/8" drive

Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
Ships on Sep 1, 2026
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.
Bav Auto Tools - Corporate Logo
T#:580395
Part#: B8800082
In Stock
Sale - Save 15% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.04 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.04 USD
Free Shipping on orders $49 and up
Multiple adapters include to fit a variety of vehicles.

Bav Auto Tools - Corporate Logo
T#:580336
Part#: B8800004
In Stock
Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 38.99

This product was last offered at the strikethrough price on
05-03-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Use this high-quality fluid transfer pump to remove old fluid from power steering reservoirs, brake fluid reservoirs or differentials that do not have drain plugs (as on many later model BMWs), or to fill transmissions, differentials, and any other assemblies when changing the fluids.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:31191945
Part#: TMS8HPATSKT1
In Stock
Sale - Save 1% $ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 201.99

This product was last offered at the strikethrough price on
04-14-2026

$ 200.32 USD
Free Shipping on orders $49 and up
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416756
Part#: 11747626350TMSKT
In Stock
Sale - Save 45% $ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 223.48 USD
Free Shipping
Sale - Save 45%
$ 408.99

This product was last offered at the strikethrough price on
07-14-2026

$ 223.48 USD
Free Shipping
Kit includes both boost solenoids, vacuum hose and T fitting for a easy leak free install
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
Ships on Oct 13, 2026
Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sale - Save 5%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less


Bav Auto Tools - Corporate Logo
T#:580437
Part#: B8800132
In Stock
Sale - Save 10% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.19 USD
Free Shipping on orders $49 and up
Used to remove corrosion and ensure brake rotors, wheel spacers, etc sit flush on your hubs
Packaged by Turner - Corporate Logo
T#:583535
Part#: N54PISKT1
In Stock
Sale - Save 19% $ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.49 USD
Free Shipping
Sale - Save 19%
$ 279.99

This product was last offered at the strikethrough price on
05-03-2026

$ 227.49 USD
Free Shipping
Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced. Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This kit contains: 6 BOSCH Spark Plugs 6 Bavarian Autosport Ignition Coils 1 Dielectric Spark Plug Boot Protector - 4 Gram Packet
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580348
Part#: B8800019
In Stock
Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Used to remove your fan clutch

Bav Auto Trailing Arm Inner Bushing Tool - Master Set
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.
Bav Auto Tools - Corporate Logo
T#:580442
Part#: B8800137
In Stock
Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD
Free Shipping
Sale - Save 3%
$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD
Free Shipping
Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.
Show More Show Less

Bav Auto Tools - Corporate Logo
T#:580334
Part#: B8800002
In Stock
Sale - Save 25% $ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 31.99

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Free Shipping on orders $49 and up
Self supporting bottle makes the job easier and keeps old fluid contained and ready for disposal.
Bav Auto Tools - Corporate Logo
T#:580429
Part#: B8800122
In Stock
Sale - Save 10% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD
Free Shipping on orders $49 and up
For use with B8800120 (Hub Puller Adapter) as an impact driver to aid in removal of stuck CV axle shafts.

Bav Auto Tools - Corporate Logo
T#:580335
Part#: B8800003
In Stock
Sale - Save 15% $ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.84 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 60.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.84 USD
Free Shipping on orders $49 and up
Use this high-quality fluid transfer pump to remove old fluid from power steering reservoirs, brake fluid reservoirs or differentials that do not have drain plugs (as on many later model BMWs), or to fill transmissions, differentials, and any other assemblies when changing the fluids. For draining differentials we recommend using the Bavarian Autosport adapter part # B3300000.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580423
Part#: B8800116
In Stock
Sale - Save 15% $ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 56.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.44 USD
Free Shipping on orders $49 and up

Remove door panels, trim, emblems, etc., with ease... without scratches. This 27-piece, pry tool kit is made of impact-resistant nylon that doesn't scratch paint or mar parts like metal pry tools and screwdrivers. Great for door and window repairs, emblems, moldings, etc. Comes in a handy storage box

The color of tools may vary.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

Genuine BMW - Corporate Logo
T#:2910
Part#: 12137594937
In Stock
Sale - Save 5% $ 82.89

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 78.75 USD
Free Shipping
Sale - Save 5%
$ 82.89

This product was last offered at the strikethrough price on
06-25-2026

$ 78.75 USD
Free Shipping
Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Genuine BMW/Bosch ignition coil that is the current replacement for some BMW 6 and 8-cylinder engines built from the late 2000s and after. It's listed as a replacement coil for N54, N63, S63, and S63TU engines (but may be split into specific model years, see below). BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part numbers 12137571643, 12137562744, and 12137551049.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011-2013 E82 BMW 1M Coupe
2007-2010 E9X BMW 335i 335xi
2007-2010 E60 BMW 535i 535xi
6/2009-2010 E60 BMW 550i
2011+ F10 BMW 550i 550i xDrive M5
6/2009-2011 E63 BMW 650i
2012+ F12 BMW 650i
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Show More Show Less

Genuine BMW - Corporate Logo
T#:19636
Part#: 18307553603
In Stock
Sale - Save 25% $ 32.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.79 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 32.99

This product was last offered at the strikethrough price on
03-31-2026

$ 24.79 USD
Free Shipping on orders $49 and up
Genuine BMW EXHAUST SYSTEM GASKET
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
In Stock
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5376299
Part#: 11517632426TMSKT
In Stock
Sale - Save 13% $ 987.99

This product was last offered at the strikethrough price on
03-31-2026

$ 855.23 USD
Free Shipping
Sale - Save 13%
$ 987.99

This product was last offered at the strikethrough price on
03-31-2026

$ 855.23 USD
Free Shipping
Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)Add strength to your cooling system and replace your water pump The secret of any reliable performance car is a rock-solid cooling system. Unfortunately, the N54's stock cooling system has several shortcomings that get in the way of reliable, repeatable, dependable performance. Turner Motorsport has spent years behind the wheel of modified N54-powered BMWs, and we've figured out what it takes to keep your N54 cool and happy. Using a combination of in-house designed parts and carefully-selected aftermarket components, we've put together an all-inclusive package that will allow you to replace your water pump and beef up your cooling system at the same time. Here's what's included: New water pump with replacement screws New thermostat Billet thermostat hose adapter (a great replacement for the stock, crack-prone plastic part!) Silicone coolant outlet hose Aluminized silicone water pump hose (aluminized for heat resistance to stay cool!) Heavy Duty aluminum coolant bleed screw (replace the strip-prone plastic screw!) New hose clamps 1 gallon of Genuine BMW coolant (just add distilled water at your desired ratio) Red Line Water Wetter (trust us, this stuff works - we've been running it for years!)
Show More Show Less


Bav Auto Tools - Corporate Logo
T#:580366
Part#: B8800042
In Stock
Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD
Free Shipping on orders $49 and up
Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580427
Part#: B8800120
In Stock
Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD
Free Shipping
Sale - Save 10%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD
Free Shipping
For use with B8800122 impact driver to remove stuck CV axle shafts.
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.

Bav Auto Tools - Corporate Logo
T#:580397
Part#: B8800084
In Stock
Sale - Save 15% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD
Free Shipping
Sale - Save 15%
$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 124.94 USD
Free Shipping

Bav Auto Tools - Corporate Logo
T#:580394
Part#: B8800081
In Stock
Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD
Free Shipping
Sale - Save 5%
$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD
Free Shipping
Used to install or remove shock and strut nuts - no more using an impact gun!
Bav Auto Tools - Corporate Logo
T#:580341
Part#: B8800011
Ships in 1 Business Day
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Simple 15 liter fluid drain pan to enable you to change your oil (and any other fluids) at home in your garage.

Packaged by Turner - Corporate Logo
T#:15744051
Part#: 82142209769KT
In Stock
Sale - Save 3% $ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 146.99

This product was last offered at the strikethrough price on
05-03-2026

$ 142.76 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:33057
Part#: 11247628034
In Stock
Sale - Save 5% $ 41.45

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.38 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 41.45

This product was last offered at the strikethrough price on
06-25-2026

$ 39.38 USD
Free Shipping on orders $49 and up


Genuine BMW Bearing Shell, Red - 50,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW - Corporate Logo
T#:9264
Part#: 51218213607
In Stock
Sale - Save 8% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 47.95 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 51.99

This product was last offered at the strikethrough price on
06-15-2026

$ 47.95 USD
Free Shipping on orders $49 and up


Genuine BMW Key Case
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E39 M5,E46 M3,E30,E34,E36,E38,E39,E46,E53 X5


Genuine BMW - Corporate Logo
T#:216974
Part#: 11348605663
In Stock
Sale - Save 7% $ 63.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.32 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 63.99

This product was last offered at the strikethrough price on
07-15-2026

$ 59.32 USD
Free Shipping on orders $49 and up
Genuine Bmw Exhaust Valve - 11348605663
Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.
Genuine BMW - Corporate Logo
T#:632644
Part#: 51912465720
Ships in 1 day
Sale - Save 7% $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.03 USD
Free Shipping on orders $49 and up
Sale - Save 7%
$ 44.99

This product was last offered at the strikethrough price on
06-25-2026

$ 42.03 USD
Free Shipping on orders $49 and up


Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.
Packaged by Turner - Corporate Logo
T#:6181666
Part#: TWHF9905F13T
In Stock
Sale - Save 5% $ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
Sale - Save 5%
$ 151.99

This product was last offered at the strikethrough price on
05-15-2026

Starting at $ 144.57 USD
Free Shipping
12.5MM (.49 inch) Big Pad Wheel Spacers for BMW E70 X5M, E71 X6/X6M, F02, F06, F07, F10, F12/F13, F22, F25, F3X, F8X M3/M4 These are our Big Pad wheel spacers designed for the latest generation of factory BMW wheels. The "wheel pad" is the back of the wheel that mounts to the hub on the car. Since the early 2000s the factory BMW wheel pad diameter has grown - 150mm, 152mm, 154mm, and now 156mm. Most of the wheel spacers on the market are 152mm. The difference from using the smaller spacer on a large pad will leave an unsightly step down between the back of the wheel and the brake rotor hat (see image). To fix this visual defect we use a larger diameter spacer - the Big Pad. This will have less of a step, or no step at all, when used with the larger pad size. Note that nearly all aftermarket wheel manufacturers use the smaller pad size (mainly to reduce unsprung weight). For more information on wheel pad sizes and their effects on fitment and strength, click to our spacers FAQ page. Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems. A spacer fits between the wheel and the hub assembly. The wheel will be pushed further outboard by the thickness of the spacer. Spacers allow you to correct wheel offset issues when the wheel is too 'tucked in' to the bodywork, clear the wheel from contact with the suspension or inner bodywork, clear larger brakes, improve handling and stability by increasing track width, or simply to get the right look and stance. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market! Turner Wheel Spacer Features hub-centric design with hub-centric lip precise tolerance fitment thanks to CAD process and CNC mill machine large pad surface area - 156mm vs standard 150mm aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color Turner Motorsport track and street tested! Made in the USA Wheel Spacer Tech & FAQ Important Note: It is vital that you measure the depth of your hub lip. The depth of the lip must not exceed the thickness of the spacer. This is critical on newer chassis cars that have deeper hubs than older models. For examples and tips on measuring, check out our How To Measure for Spacers page. Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: large Extended Wheel Bolts Required for all BMW wheel spacers is a set of longer wheel bolts or wheel studs. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). A black zinc coating will maintain a factory BMW appearance and provide long-lasting corrosion protection. Zinc finishes are designed to withstand 700 hours of salt spray testing. This item fits the following BMWs: Front or Rear 2014+ F22 BMW 228i 228iX M235i M235iX 2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 2012+ F31 BMW 328i 328iX - Wagon 2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 2014+ F33 BMW 428i 428iX 435i 435iX - Convertible 2014+ F36 BMW 428i 428iX 435i 435iX - Gran Coupe 2015+ F80 BMW M3 2015+ F82 BMW M4 2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT 2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive M5 2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive M6 2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe 2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li 2011+ F25 BMW X3 xDrive28i X3 xDrive35i Rear Only 2007-2013 E70 BMW 2007-2014 E71 BMW
Show More Show Less