Showing 1677 results for ""

Sort By:

VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 3 Business Days
$ 554.99 USD
Free Shipping
$ 554.99 USD
Free Shipping
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less
MANLEY - Corporate Logo
T#:17073599
Part#: 646000C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW N54B30 engine with the N54B30 32cc Platinum Series Dish Piston Set, featuring high-strength 2618 material for enhanced performance.

  • Specifically designed for BMW N54B30 engines
  • Platinum Series for superior strength
  • Offset wrist pin for quiet start-ups
  • Premium Chrome Moly and 9310 alloy wall pins included
  • Pressure balance groove for optimal functionality
  • Accommodates +1mm valve sizes
  • Premium Steel top rings with Napier seconds
  • Round wire locks included for secure installation
  • Recommended piston clearance of .0035" for precision

Elevate your BMW N54B30 engine's performance with this Platinum Series Dish Piston Set, ensuring durability, quiet start-ups, and precision functionality.

Show More Show Less
Performance Tool - Corporate Logo
T#:1809154
Part#: W5368
Ships in 2 Business Days
$ 13.68 USD
Free Shipping on orders $49 and up
A must for any toolbox.

Genuine BMW - Corporate Logo
T#:20218
Part#: 11617535849
Ships in 1-2 days
$ 2.99 USD
Free Shipping on orders $49 and up
Genuine BMW ENGINE SCREW

Permatex - Corporate Logo
T#:3672391
Part#: 22058
Ships in 2 Business Days
$ 20.99 USD
Free Shipping on orders $49 and up
Protects electrical connections and wiring from salt, dirt and corrosion
Victor Reinz - Corporate Logo
T#:369383
Part#: 12611744292
In Stock at Vendor
$ 8.99

This product was last offered at the strikethrough price on
08-26-2026

$ 7.99 USD
Free Shipping on orders $49 and up
$ 7.99 USD
Free Shipping on orders $49 and up
Used to seal sensor to the oil pan

Baum Tools - Corporate Logo
T#:589888
Part#: B2249117KIT
Ships in 6 Business Days
$ 635.99 USD
Free Shipping
$ 635.99 USD
Free Shipping
Timing tool set for BMW N63 and S63 V8 engines.

VTT BMW N54 “DI Injector” Delete Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:11497326
Part#: VTT-N54-DI-DELET
Ships in 2 Business Days
$ 339.99 USD
Free Shipping
$ 339.99 USD
Free Shipping
Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets​ Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Billet Check Valve - 10 Barb
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:597641
Part#: VTT-CHECK-2
In Stock
$ 36.99 USD
Free Shipping
$ 36.99 USD
Free Shipping
Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!
Rein - Corporate Logo
T#:53750214
Part#: HWU0115
Ships in 4 Business Days
New Item
$ 17.99 USD
Free Shipping on orders $49 and up
Rein Oil Drain Plug with Aluminum Construction, OE Dimensions and Threading. Upgrade Over Stock with a Magnetic tip to collect unwanted debris


VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
In Stock
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
Ships in 2 Business Days
$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
For servicing overhead valve engine with cylinder head removed.
Performance Tool - Corporate Logo
T#:1809147
Part#: W5202
In Stock at Vendor
$ 21.99 USD
Free Shipping on orders $49 and up
Nitrile Butadiene Rubber

OEM Rein High Pressure Fuel Pipe - BMW N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:45997482
Part#: RFP0007
In Stock
$ 53.99 USD
Free Shipping on orders $49 and up
If the high-pressure fuel line connecting your fuel pump to the fuel rail is missing or damaged, replace it with this OEM Rein pipe.

Garrett - Corporate Logo
T#:396932
Part#: 11657646092
Ships in 3 Business Days
$ 1,307.99 USD
Free Shipping
$ 1,307.99 USD
Free Shipping
Upgrade Your BMW with Garrett Turbochargers

Garrett offers a comprehensive range of turbochargers suitable for various diesel and gasoline light vehicle engines, covering power units from 0.6 liters to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett's product lineup caters to engines with power ratings from 60hp to a formidable 4000hp. With Garrett's advanced technologies and innovations, major global automakers have integrated their products into nearly 100 million vehicles. The company continually launches approximately 100 new applications every year, spanning gas, diesel, natural gas, electric, and fuel cell powertrains.

Signs of a failing turbocharger include abnormal oil consumption, smoking, increased turbo lag, failure to maintain boost, or the vehicle entering "limp mode." To revive your BMW's performance, it's essential to replace any malfunctioning turbocharger.

Show More Show Less
OEM Rein Oil Filter Cap - BMW N20 N52 N54 N55
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:46134810
Part#: CPL0054
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up
Over time, has the cap for your oil filter housing become harder to remove? Using the wrong tool can round the top of the cap, making removal harder each time. Replace your old cap and seal to ensure your engine is leak-free. We recommend pairing this with the Schwaben Oil Filter Cap Tool (T#371924) to make installation and removal easier.
Show More Show Less

Genuine BMW - Corporate Logo
T#:45137
Part#: 16131183912
Ships in 2 Business Days
$ 9.99 USD
Free Shipping on orders $49 and up


Genuine BMW Sealing Grommet
This item fits the following BMW Chassis:
E39 M5,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E38,E39,E46,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less
AGA Tools - Corporate Logo
T#:6924319
Part#: AGA-6061-TC
Ships in 8 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

  • Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
  • Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
  • Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
  • Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.
Show More Show Less

Lisle - Corporate Logo
T#:641682
Part#: LIS22850
In Stock at Vendor
$ 17.99 USD
Free Shipping on orders $49 and up
A must for any car enthusiast.

Bosch - Corporate Logo
T#:374530
Part#: 17187
In Stock
$ 243.99

This product was last offered at the strikethrough price on
06-05-2026

$ 165.99 USD
Free Shipping
$ 165.99 USD
Free Shipping

OEM Bosch replacement oxygen sensor. Lambda Monitor Sensor : L = 500mm

Fits the following BMW chassis:
E70 E71 F01 F02

Fits the following BMW engines:
N63, S63

Show More Show Less
Performance Tool - Corporate Logo
T#:2242226
Part#: W80533
Ships in 2 Business Days
$ 20.25 USD
Free Shipping on orders $49 and up
Extended socket length reaches confined areas.
AGA Tools - Corporate Logo
T#:5175740
Part#: AGA-11-9-900-K
Ships in 8 Business Days
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
A must have for a timing job.


Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

Performance Tool - Corporate Logo
T#:2242223
Part#: W80573
Ships in 2 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines
Intake Seal
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639328
Part#: 13718596850
In Stock
$ 9.99

This product was last offered at the strikethrough price on
07-13-2026

$ 9.59 USD
Free Shipping on orders $49 and up
$ 9.59 USD
Free Shipping on orders $49 and up
O-ring gasket for air intake between charge pipe and intercooler.

Lisle - Corporate Logo
T#:5958663
Part#: 59370
Ships in 2 Business Days
$ 28.55 USD
Free Shipping on orders $49 and up
Combination Removal and Installation Tool for Most Stretch Belt Applications Found on Many Accessory Drive Systems.

Fuel Injector Replacement Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15744008
Part#: 13538627842-KT
In Stock
Sale - Save 26% $ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 1,250.99

This product was last offered at the strikethrough price on
06-15-2026

$ 929.26 USD
Free Shipping on orders $49 and up
Replace your old injectors! Includes a full set of Bosch injectors, and decoupling elements.
Flapper Delete Fitting - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557962
Part#: VTT-FLAPPER-DELE
Ships on Nov 3, 2026
$ 57.99 USD
Free Shipping
$ 57.99 USD
Free Shipping

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

Show More Show Less

Victor Reinz - Corporate Logo
T#:373815
Part#: 11617547242
Ships in 2 Business Days
$ 68.99

This product was last offered at the strikethrough price on
05-07-2026

$ 67.99 USD
Free Shipping on orders $49 and up
$ 67.99 USD
Free Shipping on orders $49 and up
1 for each intake runner 6 in total
MANLEY - Corporate Logo
T#:26271778
Part#: 14448-6
In Stock at Vendor
$ 1,641.99 USD
Free Shipping on orders $49 and up
Unlock the full potential of your BMW N54 engine with the Forged TurboTuff Connecting Rod Set from Manley Performance. Crafted with precision and expertise, these connecting rods are designed to deliver unparalleled performance and durability. Renowned for their lightweight yet robust construction, they undergo rigorous manufacturing processes to ensure exceptional quality. Each set is meticulously weight-matched for optimal balance, providing enhanced engine efficiency and reliability. Elevate your BMW N54 engine to new heights with the Manley Performance TurboTuff Connecting Rod Set.
Show More Show Less

Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock at Vendor
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

Elring - Corporate Logo
T#:596412
Part#: 11127567765
In Stock
$ 137.10

This product was last offered at the strikethrough price on
08-26-2026

$ 112.99 USD
Free Shipping
$ 112.99 USD
Free Shipping
Just a head gasket, not a set
Norma - Corporate Logo
T#:594670
Part#: 64218367179
Ships in 2 Business Days
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Clamps are like bolts and nuts, as you can never have enough of them. If you do work on your vehicle in your home, you are going to need clamps often. If you need one clamp, why not get a few to ensure that you are always prepared.
Show More Show Less
Braille - Corporate Logo
T#:558046
Part#: G30
Ships in 7 Business Days
$ 522.99 USD
Free Shipping on orders $49 and up
The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.
Show More Show Less


OEM BorgWarner N55 Turbocharger - Pneumatic Wastegate - BMW F06/07/10...
For vehicles with a pneumatic wastegate only
For vehicles with a pneumatic wastegate only
BorgWarner - Corporate Logo
T#:594834
Part#: 11657636425
In Stock
Sale - Save 5% $ 1,716.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,628.99 USD
Limited Qty Sale
Free Shipping
Sale - Save 5%
$ 1,716.99

This product was last offered at the strikethrough price on
08-24-2026

$ 1,628.99 USD
Limited Qty Sale
Free Shipping
Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace your failing turbocharger with this high-quality OEM turbo from BorgWarner. **Note: This is a brand new unit, not a remanufactured one. No core charge!**
Show More Show Less
Elring Valve Seal Repair Kit
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591665
Part#: 11340054492
In Stock
$ 53.99

This product was last offered at the strikethrough price on
08-14-2026

$ 45.99 USD
Free Shipping on orders $49 and up
$ 45.99 USD
Free Shipping on orders $49 and up
Mahle Motorsports - Corporate Logo
T#:2928970
Part#: 197832209
In Stock at Vendor
$ 1,088.99 USD
Free Shipping
$ 1,088.99 USD
Free Shipping
Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC

Victor Reinz - Corporate Logo
T#:592881
Part#: 11367507729
Ships in 2 Business Days
$ 3.99 USD
Free Shipping on orders $49 and up
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

Victor Reinz - Corporate Logo
T#:593012
Part#: 13547563377
Ships in 2 Business Days
$ 11.99

This product was last offered at the strikethrough price on
08-26-2026

$ 9.99 USD
Free Shipping on orders $49 and up
$ 9.99 USD
Free Shipping on orders $49 and up
Seals the throttle body to the intake manifold
Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships on Nov 3, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

CTA Tools - Corporate Logo
T#:584132
Part#: CTA7644
Ships in 6 Business Days
39% off MSRP $ 529.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 322.54 USD
Free Shipping
39% off MSRP
$ 529.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 322.54 USD
Free Shipping

The CTA Fuel Injector Tool kit is designed to remove and install your fuel injectors. 130 180, 130 270, 130 320, 2249 115

Designed to service the following BMW platforms:

N20, N47, N54, N55, N57 and N63

Show More Show Less
THINKCAR - Corporate Logo
T#:2302718
Part#: 301180767
Ships in 2 Business Days
$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 86.99 USD
Free Shipping
$ 86.99 USD
Free Shipping
ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

VTT Modular Cast Aluminum CNC Valve Cover Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:586044
Part#: VTTN54CASTVC-1-1
Ships on Nov 3, 2026
$ 759.99 USD
Free Shipping
$ 759.99 USD
Free Shipping

Gear Wrench - Corporate Logo
T#:641411
Part#: KDT2979
Ships in 7 Business Days
$ 10.99 USD
Free Shipping on orders $49 and up
Sharp, tempered point scribes metal
ARP - Corporate Logo
T#:26238387
Part#: ARP-HSK-N63
Ships in 3 Business Days
Starting at $ 749.99 USD
Free Shipping on orders $49 and up
Starting at $ 749.99 USD
Free Shipping on orders $49 and up
Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.
Show More Show Less
Fischer and Plath - Corporate Logo
T#:403883
Part#: 07119963151
Ships in 2 Business Days
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
A12x17-CU


AGA Tools - Corporate Logo
T#:26404835
Part#: AGA-N63-6061-URC
Ships in 8 Business Days
$ 449.99 USD
Free Shipping on orders $49 and up
The BMW N63 rear cover is a metal plate that covers the rear of the BMW N63 V8 engine. It helps to seal the engine and prevent oil leaks. Over time, the original sealing gasket becomes brittle and does not seal, causing leaks between the engine and transmission bell housing. This repair can be very expensive and is usually misdiagnosed for a rear main seal. The AGA Updated N63 Rear Cover is an inexpensive alternative, made of 6061 billet aluminum. This kit includes the rear cover, viton o-ring, alcohol wipe, scotch-brite pad and o-ring grease. BMW Part # 11142446298 & 11148483799 BMW Service Bulletin (SIB) 11 09 16
Show More Show Less
Performance Tool - Corporate Logo
T#:2242222
Part#: W80572
Ships in 2 Business Days
$ 21.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines