BMW Maintenance & Tune-Up Parts for BMW 6 Series F06 (2013+)

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

High performance ignition kit for your N54/N55 featuring colder stepped spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval! Included plugs are one Step colder for N55, Two step colder for N54.

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

We've designed a permanent, high-performance replacement for the flawed OEM pan: a cast-aluminum, increased-capacity upgrade that enhances cooling and durability. Its all-aluminum construction provides a significant upgrade over the OE plastic pan, which is prone to cracking when impacted by road debris. Engineered for those who demand more from their vehicle, our design increases fluid capacity to promote superior cooling and help maintain optimal transmission temperatures, even in the most demanding conditions.

To ensure a leak-free seal, we engineered a heavy-duty Viton gasket specific to their transmission pan design. The Viton material provides exceptional reliability under high temperatures and resists deformation—a common failure point of the factory rubber gasket. For further protection, integrated magnets actively attract and hold metal debris that could otherwise compromise the transmission's longevity. This innovative design keeps your fluid clean and extends the overall life of your drivetrain.

Whether your DCT-equipped BMW serves as a track car or a highway cruiser, this pan ensures your transmission remains cool and efficient, minimizing the risk of overheating and wear.

DESIGN

Durable cast aluminum construction High-capacity design increases fluid volume (~7.5L capacity) Specifically designed to accept the OEM suction filter (28107842828) Hard coat black anodized with raw "Turner" logo KEY BENEFITS

A resilient, reliable replacement for the OE plastic fluid pan—crafted from aluminum for superior durability and features a threaded drain plug to prevent stripped threads Increased fluid capacity and cooling fins work together to provide a drastic increase in cooling Compatibility with the OEM suction filter ensures an easy service KIT CONTENTS

High-Capacity Aluminum Transmission Pan Perimeter Gasket/O-Ring Mounting Screws (14) Drain Plug PRODUCT DEVELOPMENT

Our High-Capacity DCT Transmission Pan was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Enhance your BMW's performance with the upgraded BAV Ignition Coil, designed to boost firepower and optimize engine efficiency. These coils boast modified core windings for a faster, more efficient burn, resulting in increased torque at lower RPMs and heightened horsepower in the upper range. While improvements depend on your engine's condition, these coils ensure noticeable enhancements in performance and potential fuel economy benefits.

Product Benefits:

Improved engine firepower and efficiency
Increased torque at lower RPMs
Enhanced horsepower in higher ranges
Potential improvement in fuel economy
Set of eight for complete BMW Cooper replacement

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Kit Includes:

Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan
OE Hengst G8X Filter Installation Kit
Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

CATACLEAN - The Original Science is a patented, EPA-approved engine, fuel, and exhaust system cleaner that effectively reduces carbon build-up and cleans critical components such as oxygen sensors, fuel injectors, and cylinder heads. This versatile product is safe for gasoline, diesel, and hybrid engines and does not alter fuel composition.

• EPA Approved: Meets stringent environmental standards for safe and effective use.
• Versatile Compatibility: Safe for gasoline, diesel, and hybrid engines without altering fuel composition.
• Comprehensive Cleaning: Cleans oxygen sensors, fuel injectors, and cylinder heads while reducing carbon build-up.
• Emission Reduction: Can lower total hydrocarbon emissions by up to 50%, improving environmental performance.
• Enhanced Engine Performance: Addresses drivability issues like power reduction, hesitation, and hard starts.
• Catalytic Converter Efficiency: Helps restore and maintain catalytic converter efficiency, extending vehicle life.
• Improved Fuel Efficiency: Can lead to better fuel efficiency and increased MPG.
• Easy to Use: Simply pour into the fuel tank and drive for optimal results; use four times a year.
• Durable Packaging: New COEX-HDPE bottle designed for increased strength with no evaporation.

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

• Consistent filtering across entire filter surface
• Superior ASTMF316 filtration performance
• Magnetic Prefiltering
• Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
• Easy inspection of engine contamination
• Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

Experience the power of Cataclean, an EPA-approved solution designed to comprehensively clean your BMW's engine, fuel system, and exhaust. This patented formula targets carbon build-up while revitalizing oxygen sensors, fuel injectors, and cylinder heads. Compatible with gasoline, diesel, and hybrid engines, Cataclean ensures peak engine performance without altering fuel composition. Independent emissions testing has shown significant reductions in hydrocarbon emissions, making it a trusted choice for engine maintenance. Utilize Cataclean regularly to address drivability issues, enhance catalytic converter efficiency, and extend your vehicle's lifespan. With its easy-to-use design, simply pour and go every three months to keep your BMW running smoothly.

• EPA Approved formula
• Easy-to-use application every 3 months
• Compatible with capless gas tanks
• Safe for gasoline, diesel, and Hybrid engines
• Reduces hydrocarbon emissions by up to 50%
• Restores catalytic converter, oxygen sensors, fuel injectors, and cylinder heads
• Legal in all 50 states
• Patented formula
• Improves fuel efficiency and MPG
• Features COEX-HDPE bottle for increased strength and no evaporation