BMW Tools & Specialty Equipment for BMW 6 Series F06 (2013+)

QuickJack SUV & Light Truck Adapter Set - BL-5000 & BL-7000 Series ...

T#:403120

Part#: 5150561

Ships in 4 Business Days

$ 236.00 USD

Add to Wish List

Qty

$ 236.00 USD

Add to Wish List

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

Low‐profile round polyurethane contact pads - Qty: 4
Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters - Qty: 4
3" stackable adapters. - Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

Show More Show Less

Genuine BMW Release Tool - 813010

T#:204810

Part#: 83302355850

Ships in 1-2 days

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Genuine BMW Release Tool - 813010 Special BMW tool used to release parking lock.

QuickJack Short Rubber Contact Block Set

T#:403116

Part#: 5300861

Ships in 4 Business Days

$ 76.00 USD

Add to Wish List

Qty

$ 76.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 6.5" long x 1.5" tall x 4" wide

Show More Show Less

Genuine BMW ICOM Next B Diagnostic Adapter - MOST Connector

T#:397153

Part#: 81312360884

Ships in 1-2 days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

Genuine BMW Torque Angle Meter

T#:170181

Part#: 83300490504

Ships in 1-2 days

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Genuine BMW Torque Wrench - No. 009120

Genuine BMW Tool Kit - 71111230685

T#:156504

Part#: 71111230685

Ships in 2 Business Days

1% off MSRP $ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD

Add to Wish List

Qty

1% off MSRP

$ 203.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 201.99 USD

Add to Wish List

Genuine BMW TOOL KIT

QuickJack 6000ELX Super-Long - 6,000 Lb. Capacity - 110 Volt (60Hz) ...

SAVE $300 IN SHIPPING!

T#:3643614

Part#: 6000ELX

Ships in 4 Business Days

Starting at $ 2,694.00 USD

Add to Wish List

Starting at $ 2,694.00 USD

Add to Wish List

The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.

Show More Show Less

TL/SLX Frame Extensions - Pair

T#:1965125

Part#: 5620291

Ships in 4 Business Days

$ 410.00 USD

Add to Wish List

Qty

$ 410.00 USD

Add to Wish List

Increases the lift point spread of the 5000TL, 7000TL, BL-5000SLX and BL-7000SLX by 6 inches

Urethane Pinch-Weld Puck - 3" Diameter - Set Of 4

T#:840366

Part#: 5300011

Ships in 4 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Round pinch-weld pucks are specifically designed to handle even more difficult-to-reach pinch-weld rails, while protecting your car.

Master Flaring and Tubing Tool Set

T#:641941

Part#: ATD5478

Ships in 6 Business Days

$ 294.99 USD

Add to Wish List

Qty

$ 294.99 USD

Add to Wish List

This great set does all the popular flares

Urethane Pinch-Weld Block - 3x3x2.5" - Set Of Four

T#:840364

Part#: 5300013

Ships in 4 Business Days

$ 100.00 USD

Add to Wish List

Qty

$ 100.00 USD

Add to Wish List

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

Specially formulated urethane rubber for durability
Deep bilateral slots accommodate virtually all pinch weld frames
Versatile positioning: lengthwise or crosswise
Water, chemical resistant, and 100% weatherproof
Single-piece construction ensures a superior hold
Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Show More Show Less

QuickJack Medium Rubber Contact Block Set

T#:403117

Part#: 5300863

Ships in 4 Business Days

$ 86.00 USD

Add to Wish List

Qty

$ 86.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

Show More Show Less

76PC Metric Tap And Die Set

T#:3629264

Part#: ATD276

Ships in 6 Business Days

$ 446.99 USD

Add to Wish List

Qty

$ 446.99 USD

Add to Wish List

Made from Titanium coated alloy steel for durability and precision threading. You can do it all with complete kit.

Long QuickJack Hydraulic Hose - Priced Each

T#:403155

Part#: 5570216

In Stock

$ 56.00 USD

Add to Wish List

Qty

$ 56.00 USD

Add to Wish List

Replacement long hydraulic hose - 2 required

QuickJack 8000TL Vehicle Lift Package - 110 Volt (60Hz)

T#:40714793

Part#: 5176009

Ships in 4 Business Days

$ 2,450.00 USD

Add to Wish List

Qty

$ 2,450.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TL vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). See full listing for more details!

QuickJack Tall Rubber Contact Block Set

T#:403118

Part#: 5300862

Ships in 4 Business Days

$ 130.00 USD

Add to Wish List

Qty

$ 130.00 USD

Add to Wish List

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

Show More Show Less

QuickJack 8000TLX Extended Vehicle Lift Package - 110 Volt (60Hz) ...

T#:40342807

Part#: 5176113

Ships in 4 Business Days

$ 2,500.00 USD

Add to Wish List

Qty

$ 2,500.00 USD

Add to Wish List

This QuickJack package deal includes the 8000TLX extended vehicle lift, a set of QuickJack wall hangers (T#913727), and an SUV & Light Truck Adapter set (T#403120). The 8000TLX extended vehicle lift has a maximum lifting capacity of 8,000-lb. It is the highly anticipated sequel to QuickJack's beloved 7000TLX. With the ability to lift an extra 3-inches, the 8000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 8,000 lbs. The longer frames and 66" lift point make this kit perfect for larger SUVs and trucks. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. Through superior engineering and design, QuickJack has been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that have made QuickJack a must-have in your garage. 8000TLX still has an impressive 3.5" lowered height, 76" overall length, and 12.5" overall width. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.

Show More Show Less

SPL Parts Adjustment Wrench

T#:553641

Part#: SPLWRENCH

Ships in 1 Business Day

$ 62.00 USD

Add to Wish List

Qty

$ 62.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

This wrench is the perfect addition to your tool box. Made specifically for the SPL hybrid adjusters, it will not damage the finish and is small enough to make the needed adjustments in very tight spaces. Plus, this adjustment wrench comes with a bottle opener built in! Great for cracking open a cold one in your garage or at the track. This wrench is black anodized for looks and corrosion resistance and, as always, is made in the USA!

Show More Show Less

QuickJack BL-3500SLX - 3,500 Lb. Capacity - 110 Volt (60Hz)

Please confirm compatibility with vehicle using the "Measuring Guide Worksheet" under the "Installation" tab prior to ordering.

T#:403178

Part#: BL-3500SLX

Ships in 4 Business Days

Starting at $ 1,925.00 USD

Add to Wish List

Starting at $ 1,925.00 USD

Add to Wish List

The BL-3500SLX has a maximum lifting capacity of 3,500-lb. But its true strength is that you can take it with you. The QuickJack is so light-weight and space-efficient that you can transport it in your regular sized trunk or backseat. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Show More Show Less

Cylinder Leakage Tester

T#:5677365

Part#: ATD5573A

Ships in 6 Business Days

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

Use this tool to check for internal engine leaks

T#:570609

Part#: 83302459458

Ships in 1-2 days

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

This Genuine BMW Centering Tool Set threads into the hub assembly to keep anti click friction shims accurately positioned while sliding the brake rotor into place. Engineered to meet official factory service bulletin standards, it prevents shim misalignment and uneven rotor seating. Precision machined for seamless thread engagement and shop durability, these specialty guide pins streamline brake service while eliminating persistent front end ticks and clicks.

Show More Show Less

Genuine BMW Reversible Insert Ratchet - 83300496855

T#:531936

Part#: 83300496855

Ships in 1-2 days

$ 133.99 USD

Add to Wish List

Qty

$ 133.99 USD

Add to Wish List

This Genuine BMW Reversible Insert Ratchet is the exact factory spec tool designed to handle high stakes engine work where normal ratchets simply won't fit. Engineered for quick directional changes and optimized to accept specialty inserts and bits, this tool offers the rigidity and low profile clearance needed to execute complex jobs flawlessly.

Show More Show Less

Genuine BMW Fuel Injector Seal Removal Pliers - 83302452959

T#:548727

Part#: 83302452959

Ships in 1-2 days

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

On direct injected BMW powerplants, maintaining a perfect seal at the injector tip is absolutely critical to preventing leaks, cylinder pressure loss, and misfires. Whenever injectors are removed, the Teflon sealing rings must be replaced. Removing the old, hardened seals without damaging the injector itself requires the right tool.

Show More Show Less