BMW Brakes & Brake Parts for BMW 6 Series F06 (2013+)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

We recommend replacing the brake sensor wire each time the brake pads are replaced. These often become brittle and will disintegrate while removing them from the old pads. This sensor is mounted on the rear. If your brake lining warning is activated, the sensor will need to be replaced.

Genuine BMW Brake Pad Wear Sensor, Rear -
This item fits the following BMW Chassis:
F06,F10,F12,F13

Revamp your BMW's braking efficiency by swapping out worn brake rotors when you encounter issues like pulsating brakes, grinding, or rotor ridges. Prioritize a comprehensive inspection of calipers, pads, and brake lines for visible wear. Discover our broad range of brake pads tailored for daily driving or the demands of high-performance motorists.

This actuator controls the rear parking break and can fail after many years of heavy use and or damage from weather or debris making past the seals. Replace your faulty actuator to restore the parking break operation.

Genuine BMW Actuator Emf -
This item fits the following BMW Chassis:
E89 Z4,F06,F10,F12,F13,F25 X3,F26 X4,I12 i8

Genuine BMW front replacement brake rotors 

This item fits the following BMWs: 
2011+ F10 BMW 535i 535xi 535d 535d Xdrive

F06 640i 640i xDrive

F12/13 640i 640i xDrive

This is a pair of front brake rotors/discs (400x36mm) for the 2012+ BMW F10 M5, F13 M6. F06 M6 GC.

Includes one front left (#34112284101) and one front right (#34112284102) brake rotor, so the price is for the pair.

These front brake discs / brake rotors fit:
2011+ F10 BMW M5
2013+ F06 BMW M6 Gran Coupe
2012+ F12 BMW M6
Not for cars with Carbon Ceramic rotors.

Complete Brake Service for Your BMW

For a comprehensive brake service on your BMW, remember that it involves replacing both the pads and rotors. Additionally, if your pad-wear sensor has been triggered, it must be replaced as it is a one-time-use component.

Key Benefits:

• Complete brake service with pads and rotors replacement
• Ensures optimal brake performance and safety
• Replacement of pad-wear sensor for accurate monitoring
• Maintains proper braking system functionality

Ensure the reliability and safety of your BMW's braking system by performing a complete brake service, including the replacement of pads, rotors, and the pad-wear sensor when triggered.