AFE Summer Rebate Form

AFE Pro DryS Dynamic Air Intake System – Stage 2 uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe.

Kit includes two cone filters; 16 gauge powder coated heat shield; one-piece intake tube, dynamic air scoops that create ram air effect behind kidney grilles, plus a filter restore kit at no additional charge.

Dyno proven power increases of 28 horsepower and 31 lb-ft torque.

Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.

Dinan's Cold Air Intake system for the F06/F13 M6 adds two additional intake snorkels to complement the factory intake ducts to the airboxes (a total of 4 intake ducts feeding air into the engine). Dinan studied the aerodynamics and packaging of the front end to determine where additional intakes can take in air. New airbox covers incorporate carbon fiber air ducts that run to the top of the radiator support where it gets a ram-air effect from the front grilles. The new airbox cover and piping are designed with a composite material that blocks hot air. A K&N high flow air filter that has 77% more surface area than stock sits in the new airbox. Dinan has shown peak gains of 13hp and 9ft-lbs of torque from the intake alone but greater gains come at higher RPM where more airflow is required.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This intake is worth 3 points toward your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims."

Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect. 

Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability

Fits the following BMWs
2012-2016 F12 F13 BMW M6

Looking to upgrade your stock charge air coolers to free up power and increase the cooling efficiency of your intake system? The CSF Racing Twin Charge-Air-Cooler Set may be just the thing you need! Designed and built to significantly out perform the stock coolers, these charge air coolers have a host of features that make these a clear cut winner when tested head to head.

Features and Specs:

• World’s 1st cast end tank designed high performance charge-air-cooler set for the BMW F1x m5/m6
• Custom designed CSF liquid-to-air intercooler core (CFD analysis and testing completed to ensure optimal performance)
• 28% increase in core size per each charge cooler compared to the OEM charge air coolers.
• Top/bottom, cross-flow, dual-pass core configuration with 2-stage water cooling for maximum efficiency and intake temperature reduction
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization.
• “Drop-in fit” design for an easy & quick plug-and-play installation. Complete with OEM style “Quick-Connect” water connections and sensor ports.
• Additional E85/methane injection ports built into the cast end tank design
• Finished with a professional “Crinkle Black” powder coat finish

This item fits the following BMWs:
2011+ F10 BMW M5
2011+ F06/12/13 BMW M6

This mounts the air box to the inside of the engine bay, preventing it from shaking and/or bouncing�around.

Genuine BMW Bump Stop
This item fits the following BMW Chassis:
E82 1M Coupe,E85 Z4M,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F02,F22,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3

Fits BMW Engines including:
N52,N52N,N54,N54T,N55,S54,S55
�

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

• Reliable connection for optimal airflow
• Reduces the risk of leaks for enhanced performance
• Engineered for durability and heat resistance
• Fits both BMW and MINI models

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

• Suitable for all forced induction applications (Supercharged/Turbocharged)
• Simple handheld display for easy injection point adjustment
• VC-30 progressive controller with digital display and MAP sensor for precise injection
• Adjustable start and full points for optimal engagement
• Proportional injection based on boost pressure for accurate delivery
• Improves drivability and provides cooling benefits
• Recommended for street/strip driven gas forced induction vehicles
• OEM approved water methanol injection pump with proprietary heat flange
• Extreme Environment 300 PSI UHO pump for durability in elements
• 100% methanol resistant components for longevity
• ACU-SEAL compression fittings for leak-free operation
• Increases induction charge density for enhanced performance
• Made in the U.S.A. and supports 1,000+ HP