OEM Rein Transfer Case Overhaul Kit - BMW F22/23 F3X F07/10 F06/12/13...

2X Entries Into Our F80 M3 Sweepstakes

T#:45963167

Part#: RVK0002

Ships in 4 Business Days

$ 1,350.99 USD

Add to Wish List

Qty

$ 1,350.99 USD

Add to Wish List

The Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure-prone transfer cases was to replace them with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein's Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle, direct from the factory.

Show More Show Less

Driveshaft Center Support Bearing Carrier - Track Bushings

T#:6061652

Part#: BMW08A0-T

Ships in 5 Business Days

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
05-15-2026

$ 255.67 USD

Add to Wish List

The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.

Show More Show Less

URO Front Transfer Case Seal - BMW E9X F22/23 F3X E60 F07/10 F06/12/1...

Front

2X Entries Into Our F80 M3 Sweepstakes

T#:43750220

Part#: 27107539266

Ships in 2 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

If your transfer case front output shaft connection is leaking, there is a good chance that the case seal is damaged. Replace your leaking seal with this brand new seal from URO to prevent transfer case fluid loss and prevent damage to the transfer case.

Show More Show Less

Rein Transmission Pan Bolt - M6X28.5mm - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:45723150

Part#: 24117552108

Ships in 4 Business Days

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Prevent leaks from the transmission oil pan with brand new bolts from Rein NOTE: These bolts are priced each - The required quantity for each vehicle may change based on the specific transmission and oil pan shape. If you are unsure of how many you need for your BMW, please contact our sales team for assistance.

Show More Show Less

Stage 2 Endurance Clutch Kit

For Vehicles with production date from 2007

T#:25075808

Part#: K7052602HDOCE

Ships in 2 Business Days

$ 948.99 USD

Add to Wish List

Qty

$ 948.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

Powerflex Transmission Mount Bushing - Heritage Series

T#:54388391

Part#: PFF5-4655H

Back Ordered

$ 118.99 USD

Add to Wish List

Qty

$ 118.99 USD

Add to Wish List

Stabilize your gearbox under heavy cornering loads. These 70A durometer Heritage mounts increase rigidity by 150% to prevent shift-linkage binding, utilizing a discrete dark grey finish to blend into your undercarriage.

Show More Show Less

AAE Remanufactured Transfer Case Assembly - BMW F22/23 F3X F10 ...

T#:42705797

Part#: GBA-59260KT

Ships in 4 Business Days

$ 2,563.99 USD

Add to Wish List

Qty

$ 2,563.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Motor Mount Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:592053

Part#: 22110392551

In Stock

$ 16.50 USD

Add to Wish List

Qty

$ 16.50 USD

Add to Wish List

Used to secure the motor mount brackets, one time use bolts!

AAE Remanufactured Transfer Case Assembly w/ Electric Motor - BMW F22...

For vehicles with a production date from 09/2011+

T#:42705799

Part#: GBA-59251MKT

Ships in 4 Business Days

$ 3,519.99 USD

Add to Wish List

Qty

$ 3,519.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Shifter Ball Bushing

T#:343899

Part#: 25111469397

Ships in 2 Business Days

$ 13.46

This product was last offered at the strikethrough price on
07-02-2026

$ 6.47 USD

Add to Wish List

Qty

$ 6.47 USD

Add to Wish List

AAE Remanufactured Transfer Case Assembly - BMW F22/23 F3X F07/10 F06...

For vehicles with a production date from 09/2011+

T#:42705795

Part#: GBA-59251KT

Ships in 4 Business Days

$ 2,563.99 USD

Add to Wish List

Qty

$ 2,563.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Powerflex BMW F10/F07 Rear Diff Front Bushing

T#:33880011

Part#: PFR5-6032BLK

Ships in 2 Business Days

$ 121.99 USD

Add to Wish List

Qty

$ 121.99 USD

Add to Wish List

The BMW F10/F07 Rear Diff Front Mount Bushing from Powerflex is a performance-enhancing replacement part designed for the rear differential mounting system. Here are its main features: Polyurethane Construction for Longevity: Made from high-quality polyurethane, these bushings outperform traditional rubber bushings by resisting wear from heat, oils, and road contaminants. This means they provide a longer service life, reducing the need for frequent replacements. Enhanced Power Transfer: By limiting excess differential movement, the stiffer Powerflex bushings allow more precise power transfer to the rear wheels. This results in sharper throttle response and improved overall drivetrain efficiency, especially during spirited driving. Increased Rear-End Rigidity: The factory rubber bushings allow for some differential movement, which can lead to instability. The Powerflex bushings reduce this flex, resulting in a more stable and predictable rear end, particularly when cornering or under heavy acceleration. Improved Handling and Stability: With reduced play in the differential mounting points, the rear suspension geometry stays more consistent. This translates to sharper handling, better grip in corners, and a more connected driving experience, making the vehicle feel more composed. Controlled NVH (Noise, Vibration, and Harshness): Powerflex engineers their bushings to strike a balance between performance and comfort. While polyurethane is stiffer than rubber, these bushings are designed to minimize the increase in NVH, ensuring that the ride remains comfortable for daily driving while still benefiting from enhanced performance. Direct Fitment for BMW F10/F07: These bushings are specifically designed for the BMW 5 Series (F10) and BMW 5 Series GT (F07), providing an easy, direct replacement for the original equipment. This ensures compatibility and smooth installation. The Powerflex Rear Diff Front Mount Bushing is ideal for BMW enthusiasts seeking to upgrade their vehicle's rear differential stability and performance, particularly for high-performance driving or in modified cars.

Show More Show Less

URO Transmission Oil Cooler - F10 528i N20 2.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:37925864

Part#: 17217638582

Ships in 2 Business Days

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

URO Transmission Oil Cooler - F10 528i N20 2.0L

The URO Transmission Oil Cooler - F10 528i N20 2.0L is a premium cooling solution designed to safeguard your BMW’s transmission system from overheating and potential damage. Overheated automatic transmission fluid can degrade, causing poor shifting and harm to internal components. This corrosion-resistant, high-strength cooler delivers reliable, leak-free ATF cooling performance, ensuring your transmission operates at peak efficiency. Manufactured to OE dimensions, it provides proper clearances and easy bolt-on installation for a perfect fit. With stringent quality control at every stage of production and a 24-month unlimited mileage warranty, this transmission oil cooler is a trusted choice for BMW F10 528i N20 2.0L owners.

Key Benefits:

Prevents overheating and breakdown of automatic transmission fluid
Corrosion-resistant, high-strength materials for leak-free performance
Manufactured to OE dimensions for proper clearances and easy installation
Rigorous quality control ensures top-tier reliability
24-month unlimited mileage warranty for peace of mind

Upgrade your BMW F10 528i N20 2.0L with the URO Transmission Oil Cooler and enjoy smooth, dependable transmission performance for years to come.

Show More Show Less

Multi Use Transfer Pump

T#:1809134

Part#: W1145

In Stock

$ 18.80 USD

Add to Wish List

Qty

$ 18.80 USD

Add to Wish List

Quickly and easily transfer any fluid.

Corteco Output shaft seal - E82, E88, E90, E92, E93

T#:50013

Part#: 23121282458

Ships in 2 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Transmission output shaft seal for GS6-53BZ/DZ transmission

BMW Aluminum Bolt

2X Entries Into Our F80 M3 Sweepstakes

T#:46478545

Part#: 23000417164S

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

This is a single-use bolt and should be replaced every time it’s removed. Don’t let a major repair come to a halt because you’re missing the proper hardware.

BMW Transfer Case Bushing Removal And Installation Kit

T#:25042567

Part#: CTA8816

Ships in 6 Business Days

$ 450.45 USD

Add to Wish List

Qty

$ 450.45 USD

Add to Wish List

This all-encompassing tool kit facilitates the removal and reinstallation of the transfer case mount, providing adapters and other essential components for the task at hand. Tailored for a diverse range of BMW models equipped with AWD or xDrive systems, the kit is thoughtfully packaged in a plastic blow-molded carrying case.

Applications: X3, X5, X6, 530xi, 525xi, 325xi, 330xi, 328xi, 528xi, 535xi, 335xi, X6, 528i xDrive, 535i xDrive, 328i xDrive, 335i xDrive, and X1.

Show More Show Less

AAE Remanufactured Transfer Case Assembly w/ Electric Motor - BMW F22...

T#:42705800

Part#: GBA-59260MKT

Ships in 4 Business Days

$ 3,519.99 USD

Add to Wish List

Qty

$ 3,519.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

URO Valve Body Cover Gasket - BMW E8X E9X F8X F1X

2X Entries Into Our F80 M3 Sweepstakes

T#:37892099

Part#: 28607842856

Ships in 2 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

URO's Valve Body Cover Gasket is an essential replacement component designed to maintain a leak-free transmission system. This high-quality gasket ensures a secure seal, preventing transmission fluid loss that can lead to performance issues.

Show More Show Less

Drive Shaft Flex Joint Bolt

2X Entries Into Our F80 M3 Sweepstakes

T#:38229105

Part#: 26117551225

In Stock at Vendor

$ 3.75 USD

Add to Wish List

Qty

$ 3.75 USD

Add to Wish List

The **Drive Shaft Flex Joint Bolt** is a durable, high-strength fastener designed to securely attach the flex joint (guibo) to the driveshaft and transmission. Built for reliability, it minimizes drivetrain vibrations and ensures smooth power transfer.

Show More Show Less

AGA Tools 8HP Park Release Tool

T#:26404886

Part#: AGA-8HP-PRT

Ships in 8 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

Front Axle Shaft - Left

T#:640599

Part#: NCV27045

Ships in 3 Business Days

$ 258.99 USD

Add to Wish List

Qty

$ 258.99 USD

Add to Wish List

Transmission Fluid Service Kit

T#:57725172

Part#: 83220142516

Ships in 4 Business Days

$ 462.99 USD

Add to Wish List

Qty

$ 462.99 USD

Add to Wish List

Keep your transmission performing at its peak on both the street and the track with high-grade synthetic fluid designed for modern automatic gearboxes.

OEM LuK Dual Mass Flywheel - BMW F10 M5, F06/12/13 M6

T#:41965068

Part#: DMF184

Ships in 8 Business Days

$ 1,680.99 USD

Add to Wish List

Qty

$ 1,680.99 USD

Add to Wish List

A dual-mass flywheel is a two-part unit. A smaller-diameter flywheel bolts to the engine and sits inside of an outer flywheel. The smaller flywheel engages the larger one via a set of springs. This design offers a bit of buffering between the engine and transmission to enhance smoothness during clutch engagement. The first sign a dual mass flywheel is failing is a rattle when depressing or releasing the clutch. That develops into sounds like clutch chatter even after full engagement. This malfunction will typically occur during initial engagement and while shifting through the lower gears.

Show More Show Less

Stage 3 Daily Clutch Kit

For Vehicles with production date from 2007

T#:25075811

Part#: K7052602SSODMF

Ships in 2 Business Days

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Daily Clutch Kits: Recommended usage is daily, street, and moderate race Conservatively rated to hold 500 lbs/ft of torque Designed to be used with the stock dual mass flywheel.

Show More Show Less

South Bend Clutch Stage 3 Drag Clutch Kit

For Vehicles with production date from 2007

T#:25075815

Part#: K7052602SSDXDBDM

Ships in 2 Business Days

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

Axle Shaft Assembly

T#:596725

Part#: 33208603098

Ships in 2 Business Days

$ 393.98 USD

Add to Wish List

Qty

$ 393.98 USD

Add to Wish List

Replacement Axle Shaft Assembly from GKN

Remanufactured Mechatronic Unit - GA8HP45Z Transmission

T#:6699687

Part#: 24345A13182KT

Ships in 1-2 days

$ 6,301.99 USD

Add to Wish List

Qty

$ 6,301.99 USD

Add to Wish List

Includes a $1179.75 refundable core charge

Genuine BMW Automatic Transmission Service Kit - BMW 8HP F & G-Chassi...

T#:27138563

Part#: 24115A13115KT

Ships in 1 day

$ 919.99

This product was last offered at the strikethrough price on
09-03-2026

$ 856.99 USD

Add to Wish List

Qty

$ 856.99 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter Oil Pan Gasket & Installation Hardware Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Genuine BMW ATF 3+ Fluid NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

Genuine BMW Hex Bolt With Washer 07119904514

T#:6392

Part#: 07119904514

Ships in 1-2 days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Genuine BMW Hex Bolt With Washer
This item fits the following BMW Chassis:
E36 M3,E70 X5M,E71 X6M,E82 1M Coupe,E34,E36,E39,E65,E70 X5,E71 X6,E82,E83 X3,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16

Show More Show Less

Genuine BMW Differential Dust Cover

T#:174741

Part#: 33137600693

Ships in 1 day

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Genuine BMW Dustcover Plate.

Shifter Repair Kit - Each

T#:55245795

Part#: 2511143XKT

Ships in 10 Business Days

$ 13.04 USD

Add to Wish List

Qty

$ 13.04 USD

Add to Wish List

Tighten up your track day or spirited street shifts with this Genuine BMW Selector Rod refresh kit.

Genuine BMW O-Ring - Transfer Case Input Shaft (39 X 2 mm)

T#:53850

Part#: 27107609202

Ships in 1-2 days

6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Qty

6% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Genuine BMW O-Ring - 39X2
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E53 X5,E70 X5,E71 X6,E83 X3,E90,E92,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Genuine BMW Transfer Case O-ring (34 X 3 mm) - E70 E71 E84

T#:53844

Part#: 27107593451

Ships in 1-2 days

6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Qty

6% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Genuine BMW O-Ring - 34X3
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

UNIVERSAL JOINT

T#:50819479

Part#: 26118845528

Ships in 1-2 days

6% off MSRP $ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Qty

6% off MSRP

$ 225.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 211.99 USD

Add to Wish List

Genuine BMW Lock Ring - 27107539525

T#:53816

Part#: 27107539525

Ships in 1-2 days

6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Qty

6% off MSRP

$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 16.00 USD

Add to Wish List

Replace these when reassembling the transfer case. Genuine BMW Lock Ring - 28X2 This item fits the following BMW Chassis: E70 X5M,E71 X6M,E53 48IS,E53 X5,E70 X5,E71 X6,E83 X3,E90,E92,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Fluid Transfer Pump

T#:1809158

Part#: W1141

Ships in 2 Business Days

$ 10.19 USD

Add to Wish List

Qty

$ 10.19 USD

Add to Wish List

Fits all standard gallon bottles

Shifter Linkage Hardware Kit

T#:55209907

Part#: 25111KT

Ships in 10 Business Days

$ 8.91 USD

Add to Wish List

Qty

$ 8.91 USD

Add to Wish List

This kit ensures your shift linkage stays safely secured and firmly engaged through every hard shift.

S-Tec Remanufactured Transfer Case W/ Actuator - BMW F22/23 F3X F10 ...

T#:50066835

Part#: 27105A371F3

Ships in 1-2 days

$ 4,573.56 USD

Add to Wish List

Qty

$ 4,573.56 USD

Add to Wish List

Restore your xDrive All Wheel Drive system with this remanufactured transfer case from S-Tec. Transfer cases are an important part of the xDrive system, transfering power from the transmission to the front differential and wheels. This remanufactured unit has been completely disassembled, rebuilt with OE-quality components, then reassembled and tested for proper functionality. No core charge included.

Show More Show Less

Genuine BMW Grease

T#:198487

Part#: 83232179708

Ships in 7 Business Days

7% off MSRP $ 13.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Add to Wish List

Qty

7% off MSRP

$ 13.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 12.99 USD

Add to Wish List

Genuine BMW Grease 'One Lube Improved' - 110G
This item fits the following BMW Chassis:
E71,F01,F02,F06,F10,F12,F13,F15,F16,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Transmission Hardware Refresh Kit

T#:55317663

Part#: 2331MTKT

Ships in 4 Business Days

$ 66.67 USD

Add to Wish List

Qty

$ 66.67 USD

Add to Wish List

If your BMW’s manual shifter feels loose or struggles to cleanly find its gates, it’s time to rebuild your transmission shift detents.

Corteco Driveshaft Seal

T#:592091

Part#: 23127501712

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Located in the front of the transmission

Corteco Transfer Case Output Shaft Seal

T#:592136

Part#: 27107546667

Ships in 5 Business Days

$ 15.33 USD

Add to Wish List

Qty

$ 15.33 USD

Add to Wish List

Seals where the output shafts enter the transfer case

Automatic Transmission Mechatronics Repair Kit - GA8HP45Z - BMW F10 5...

For vehicles with the GA8HP45Z transmission and a production date of 09/2010+

T#:20518655

Part#: 24348687811KT

Ships in 7 Business Days

$ 6,004.99 USD

Add to Wish List

Qty

$ 6,004.99 USD

Add to Wish List

Restore your transmission's smooth operation with this mechatronics repair kit for the GA8HP45Z. This repair kit includes a remanufactured mechatronics unit rebuilt by BMW for like-new operation and reliability. Also included is an all-new transmission oil pan and filter. Includes a refundable $1080 core charge.

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 1

10X Entries Into Our F80 M3 Sweepstakes

T#:41931276

Part#: SB53A3STG1KT

In Stock

$ 1,440.99 USD

Add to Wish List

Qty

$ 1,440.99 USD

Add to Wish List

The SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 1 is the smart choice for BMW drivers who want dependable street performance with a touch of motorsport DNA—refined, responsive, and ready for the road.

Show More Show Less