BMW Tools & Specialty Equipment for BMW 6 Series F12 (2012+)

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Here's what makes this floor jack the best on the market:

• Dual pump pistons to reach maximum height in 5 pumps
• Low profile design keeping lowered cars in mind
• Easy maneuverability 
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Length 50"
• Shipping Weight 50 lbs

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

Features:

•  2" longer than most
• Deluxe transverse support for even more stability
•  Two angle chain hooks for safer and more stable chain support 
•  61" long and fully adjustable to any width
•  Weight rating is a full 1000 lbs.
•  Includes four rubber padded feet to prevent slipping and damage to cars finish 
• This tool features a dual hook design for holding engine or transmission in place
•  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

WHEEL STORAGE RACK:

Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

Fits up to 8½" wide wheels, depending on offset

TIRE STACK COVER:

This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

• Works with 4 tire stacks and works great with our Schwaben Wheel Tree (ES2710754).
• Durable 150D coated material is rated for outdoor use.
• Cover is a large 32" wide X 46" tall.
• Fitted with a long 29" zipper up the side for easy installation and removal.
• Nylon draw string at the bottom allows for a good snug fit.
• Includes a handy storage pouch if not in use.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This professional-grade deluxe fender roller allows you to gently and gradually flatten your inner fender lips in order to increase your fender to tire clearance.

This new deluxe fender roller has been designed to fit most applications.

This is the perfect tool for:

If you want to lower your vehicle
If you want wider-than-stock wheels
If you are going to use wheel spacers or decreased offset
Will work with bolt patterns of 4x100 and 5x100 up to 4x114.3 and 5x130 with 12mm or 14mm lug bolts.

By rolling the fender lip flat, you can lower your car further, and give your car a wider stance, without your tires rubbing on the inside of the fender.

Fully adjustable for use on vehicles of different ride heights, offsets, and wheel bolt patterns.

Use of a heat gun is recommended to soften the fender surface during the rolling process and prevent paint cracking.

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

Don’t let a dead battery or flat tire ruin your day. The Schwaben 4-In-1 Jump Pack & Tire Inflator is your all-in-one roadside emergency solution—compact, powerful, and built to keep you moving. Engineered for versatility, this unit combines a high-output lithium-ion jump starter, a digital tire inflator, a bright LED flashlight, and a portable power bank—delivering everything you need in a single, easy-to-carry package.

Whether it’s a weak battery on a cold morning or low tire pressure before a long drive, the Schwaben Jump Pack is ready to go. With 2500 peak amps, it can jump-start most 12V gas or diesel engines up to 6.0L. The integrated 150 PSI air compressor features a digital pressure readout and auto shutoff for precise inflation, while USB-A and USB-C ports let you charge your phone, tablet, or other devices. A 300-lumen LED flashlight with steady, strobe, and SOS modes ensures you’re never left in the dark.

Product Features:

12V Lithium-Ion Power Supply: 2500A peak, 74Wh capacity Digital Air Compressor: 150 PSI max with auto shutoff and pressure readout Power Bank Functionality: USB-A and USB-C compatible, 60W total output 300-Lumen LED Flashlight: Includes strobe and SOS emergency modes Rugged Design: Insulated, keyed battery cables and braided air hose with threaded fitting Kit Includes:

Schwaben 4-In-1 Jump Pack & Tire Inflator Jumper Cables & Clamps Braided Air Hose Nozzle Adapters USB-C to USB-C Charging Cable (for recharging unit) USB-A to USB-C Charging Cable (for devices) Knit Storage Bags User Manual

This great Schwaben kit is designed to work on todays modern cars. Set contains popular torx and triple square bits found on a lot of German and other European cars. Designed to operate in minimal space situations.

Set Contains:

• 6 stubby triple square with 12 mm hex to be used with included 12 mm ratcheting wrench. 4 mm, 5 mm, 6 mm, 8 mm and 10 mm. 
• 4 stubby triple square with 19 mm hex to be used with included 19 mm ratcheting wrench.. 12 mm regular and  14 mm, 16 mm and 18mm tamper proof triple square.
• Set also includes a 3/8" drive 12 mm socket and 1/2" drive 19 mm socket to fit bits. Good for using bit with ratchet or torque wrench.
• 9 torx bits 10 to 70 torx 
• Includes blow molded case with sturdy foam insert to keep every thing in order.

The OBDeleven Next-Generation device represents a cutting-edge diagnostic tool designed to comprehend and enhance your vehicle. This smart device utilizes cloud-based automotive diagnostics software compatible with iOS and Android operating systems, providing comprehensive access to your car. It can read, clear, share faults, monitor, program, and activate various comfort functions. This ULTIMATE pack also includes the OBDeleven Phone Holder (T#23714960) and Carry Pouch (T#23714959)!

The OBDeleven NextGen device is an intelligently designed automotive diagnostic tool that simplifies the process of scanning your car for faults and reading or clearing trouble codes. Additionally, it offers the convenience of customizing your vehicle through One-Click Apps, pre-made coding applications that can transform your driving experience with a single click on your smartphone.

Officially licensed by the Volkswagen Group (VAG) and the BMW Group, this device empowers every driver to make modifications to their BMW Group and Volkswagen Group (VAG) vehicles, ensuring a seamless and personalized automotive experience.

Main Features - BMW / MINI:

• Perform Advanced Diagnostics – scan all available control units, read, clear, and share trouble codes for E (from 2008), F, G, I-series, MINI (F-series), and select Rolls-Royce models.
• One-Click Apps (pre-made car coding applications to customize features and reset service reminders) for F, G, I-series, MINI (F-series), and select Rolls-Royce models. 
• Share diagnostic data
• Check car battery status

Main Features - VAG:

• Perform Advanced Diagnostics – scan, read, clear, and share trouble codes
• One-Click Apps (pre-made car coding applications to customize features and reset service reminders)
• SFD unlocked (also supports newest Volkswagen group vehicles)
• Live data - view and test control units in real-time, such as engine speed, coolant temperature, oil temperature, etc.
• Output testing

Advanced Features - VAG Only:

• Automatically identify vehicle from VIN
• Read / clear trouble codes from all control units
• Read information about control unit
• Share diagnostic data log via email
• Observe battery status
• Log connected cars history
• Engine, Equipment and fault code lookup
• Advanced control unit information
• Charts
• Gauges
• Sub control units information
• Control unit reset (UDS) 
• Security access
• Login finder
• Diagnostic service change
• Car backup and programming history

ULTIMATE Subscription Features - VAG Only (With included 12-month subscription):

*=exclusive to ULTIMATE plan (not in PRO plan)

• Coding / Long coding
• Coding II
• Sub control units coding
• Gateway installation list 
• Diagnostic service change
• Control unit reset (UDS) 
• Login finder (Android only)
• Security access (Android only)
• Adaptation / Long adaptation
• Trouble code Freeze frame
• Basic settings
• Gateway auto code (Android only)
• Live data labels
• Control unit backup (Android only)
• EEPROM (Android only)
• *UNLIMITED One-Click Apps
• *OCAbuilder (create your own One-Click Apps)
• *RAW data

One-Click Apps:

One-Click Apps are functions for daily users and don't require any additional knowledge about vehicle programming. More than 700 different apps are available for various vehicles. With the ULTIMATE version, unlimited One-Click Apps can be used. One-Click App compatibility varies by vehicle.

• Perform Service Functions (Oil Service Reset, Electronic Parking Brake Service, etc.)
• Adjust Exterior Lights (Daytime Running Lights, Cornering Lights, etc.)
• Control Comfort System Settings (Door Locks, Comfort Window Closing/Opening, etc.)
• Activate Functions After Retrofits (LED License Plate Lights, Washer Fluid Level Sensor, etc.)
• Activate Cool Visual Features (Needle Sweep, Optical Parking System, etc.)
• Add More Features (Lap Timer, Multimedia Engineering Menu, etc.)
• Disable Unwanted Functions (Soundaktor, Seatbelt Warning, etc.)

What is a “PRO” or “ULTIMATE” Plan? How does it help me?

OBDeleven offers two forms of additional software: plans and credits.

Plans (either PRO or ULTIMATE) offer new features ONLY if your vehicle is VAG. See above features lists for the features included in the plan.

Credits allow you to access One-Click Apps.  Apps vary depending on your vehicle, but there are many apps for both VAG and BMW group vehicles! See above for further information regarding One-Click Apps and their capabilities.

What can I do without a plan?

Long story short, that depends on if you have a VAG or BMW group vehicle. On standard OBDeleven Next Generation devices without a plan, you can scan, read, clear, and share trouble codes on all vehicles. On VAG vehicles, you can also view and test Live Data from your vehicle’s control units. 

You can still purchase credits on these standard devices without a plan, which allow you to access features on your vehicle using One-Click Apps.  See above for examples of these unlockable features.

Aluminum 3-Ton Jack Stands With Mechanic's Folding Ground Pad - Set Of 2 are designed for exceptional performance and convenience in automotive maintenance. These lightweight aluminum jack stands provide robust support, while the mechanic's folding ground pad ensures comfort during vehicle work.

• Lightweight Construction: Each jack stand weighs only 4.7 lbs, making them easy to handle without sacrificing strength.
• Durable Design: All-aluminum construction with heavy-duty flanged bases ensures stability and safety for loads up to 3 tons.
• Adjustable Heights: Features 6 locking positions with a minimum height of 10.6 inches and a maximum height of 15.4 inches.
• Secure Load: Extra heavy-duty load pin with a posi lock ball mechanism keeps the pin securely in place.
• Large Base: Equipped with a 7-inch diameter base for enhanced stability.
• Mechanic’s Ground Pad: Provides comfort with high-density foam and a heavy-duty cover that resists oils and fluids. Measures 17"W x 47"L when unfolded and includes built-in carrying handles.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Correct toe settings contribute to both stable steering and even tire wear. The SPC Performance wheel toe bar tool is designed to prevent vehicle drifting and ensure uniform tire wear. It includes a steel bar equipped with sliding adjusters and pointers to accurately assess the vehicle's toe alignment.

For wider wheel bases use T#386442!

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Kit Features:

• 18mm
• 19mm
• 21mm
• 22mm
• 24mm

BMW essentials from drivetrain work to fluid changes.

Features:

• 36mm 12-point deep socket, 1/2" drive - Used on axle nuts and most BMW oil filter housing nuts
• 30mm 12-point deep socket, 1/2" drive - Used on driveshaft and pinion mounting, rear wheel bearing removal and reinstallation on many BMWs
• 27mm 6-point socket, 1/2" drive - Fits N52/54 oil filter housing nuts and other various places on most BMWs
• 14/17mm service wrench - Versatile wrench features an open end and a hex head driver that fit most BMW transmission fill/drain plugs. Perfect for engine and transmission oil drains.
• M18 triple square extended reach socket, 1/2" drive - Used to remove axles and other various driveline components.
• All of the sockets included in this kit are built with extreme durability and versatility in mind, and can be used with breaker bars and impact guns.