BMW Tools & Specialty Equipment for BMW 6 Series F12 (2012+)

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 in
• Wide and robust frame made of high-strength steel
• Fitted with quick-lift pedal for easy reach of lifting point
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation

Specifications:

• Capacity:  2900 lb 
• Min. height:  3.15 in 
• Max. height:  28.94 in 
• Frame length:  37.01 in 
• Handle length:  37.40 in 
• Frame height:  6.30 in 
• Width:  18.90 in 
• Weight:  86 lb

Wall Hangers Set is the ideal solution for organizing and storing QuickJack frames in a garage. Designed for those who prefer a clean and efficient storage solution, these hangers provide a convenient way to keep your portable car lift frames off the ground and out of the way. The hangers mount directly into a sturdy wall stud, ensuring safe and simple storage for all QuickJack models. Each mount is crafted with a sleek, laser-cut QuickJack logo, affirming its authenticity and quality.

• Secure storage: Mounts directly into wall studs for safe and stable hanging of QuickJack frames.
• Universal fit: Accommodates all QuickJack models, ensuring versatility and convenience.
• Durable construction: Over-engineered to 150% of the rated capacity for long-lasting durability.
• High-quality materials: Made from brushed steel for a robust and stylish appearance.
• Authentic design: Features a sleek, laser-cut QuickJack logo, reflecting its official status and rigorous engineering standards.
• Easy installation: Simple to install, with real-world testing and advanced computer analysis ensuring reliability and resilience.

Upgrade your garage organization with the Wall Hangers Set for a neat, secure, and professional storage solution for your QuickJack frames.

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

• Low‐profile round polyurethane contact pads  -  Qty: 4
• Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters  -  Qty: 4
• 3" stackable adapters.  -  Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 inches
• Wide and robust frame made of high-strength steel
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation
• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

• Capacity:  4400 lbs
• Min. height:  3.15 inches
• Max. height:  19.49 inches
• Frame length:  25.98 inches 
• Handle length:  37.40 inches
• Frame height:  6.30 inches 
• Width:  16.14 inches
• Weight:  68 lbs

Drive Click Style Inch/Lbs Torque Wrench 3/8" 25-250 In/Lbs offers precise and reliable torque measurement for various applications. This high-quality torque wrench features a 3/8" drive head and measures torque from 25 to 250 inch-pounds, making it ideal for both professional and DIY use. The wrench is designed with a precision 45-tooth ratchet head that provides accurate torque control and an audible click to signal when the desired torque is reached. Its impact-resistant handle ensures durability, and it includes a case for convenient storage.

• Measures torque from 25-250 inch-pounds for versatile use
• Precision control with a 45-tooth ratchet head
• Audible click indicates when the desired torque is achieved
• Both clockwise and counterclockwise operation
• Durable, impact-resistant handle and includes a storage case

The VIM Tools 12" Magrail is a robust and adaptable magnetic socket organizer, perfect for keeping your sockets and hand tools securely in place. Its low-profile, anodized aluminum base ensures durability and a streamlined look, making your tools easy to organize and access.

Key Features:

• Powerful Neodymium Magnets: Keeps sockets and tools firmly in position, regardless of orientation.
• Durable Anodized Aluminum Base: Lightweight and built to last.
• Slim Profile: Dimensions are 3/16” tall, 1” wide, and 12" long.
• Color Variety: Available in various colors.
• Customizable: Studs sold separately in various packs for 1/4 in., 3/8 in., 1/2 in., 3/4 in., and 1 in. drive sockets.

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.

Features:

• Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
• An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
• An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
• Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
• Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Adjustable Hood Prop is a versatile tool designed to securely hold hoods, doors, or trunk lids open during repairs or bodywork. With an adjustable length from 28 to 46 inches, it's perfect for various tasks.

It is not intended for heavy-duty support, with a maximum weight capacity of 50 lbs.

Key Features:

• Adjustable Length: Extends from 28 to 46 inches for versatile use.
• Secure Hold: Keeps hoods, doors, or trunk lids open during repairs or bodywork.
• Easy Setup: Simple to position and secure with telescoping rod.
• Weight Capacity: Supports up to 50 lbs.
• Lifetime Warranty: Ensures long-term reliability.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.