BMW Engine Parts for BMW 6 Series F12 (2012+)

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

For BMW M54 applications, coil styles vary between M or N depending on the vehicle's production date. Models produced up to September 2002 require the M series style coil, while those manufactured after September 2002 use N series style coils. It's crucial to visually compare and verify the correct coil needed for your vehicle before making a purchase.

Benefits:

• Specific coil styles for different BMW M54 application dates
• Helps ensure the right replacement part for your vehicle's coil
• Visual verification recommended prior to purchase for compatibility

BMW N63 4.4L Ignition Service Kit provides everything necessary for a comprehensive ignition service upgrade, featuring high-performance red Dinan ignition coils. This kit is designed specifically for BMW vehicles with the N63 4.4L engine, ensuring optimal ignition performance and enhanced engine responsiveness. By replacing aging components with top-quality parts, this service kit improves overall engine efficiency and reliability.

• Complete Ignition Upgrade: Includes all components required for a full ignition service, ensuring optimal performance.
• High-Performance Ignition Coils: Features red Dinan ignition coils that enhance spark efficiency and improve throttle response.
• Enhanced Engine Efficiency: Promotes better fuel combustion and improved power output for a more responsive driving experience.
• Quality Components: Manufactured with premium materials for durability and long-lasting performance.
• Easy Installation: Designed for straightforward installation, suitable for both professional mechanics and DIY enthusiasts.

Upgrade your BMW’s ignition system with the BMW N63 4.4L Ignition Service Kit for superior engine performance and reliability.

BMW S63 4.4L Ignition Service Kit delivers a significant upgrade with up to 10% more energy output compared to stock ignition systems. This kit is designed for easy installation and includes high-performance components to enhance engine efficiency and performance. The package features red Dinan ignition coils, known for their reliability and improved spark delivery.

• Enhanced Performance: Provides up to 10% more energy output than the stock ignition system.
• Easy Installation: Direct plug-and-play design ensures a hassle-free upgrade with no modifications required.
• High-Quality Components: Includes red Dinan ignition coils for superior spark delivery and reliability.
• Improved Engine Efficiency: Optimizes combustion for better throttle response and overall engine performance.
• Durable Construction: Designed to withstand high temperatures and demanding driving conditions.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

BMW N55 S55 37cc Platinum Series Dish Piston Set - 84.5mm Bore is designed for high-performance applications, providing exceptional strength and durability for BMW engines. Turner Motorsport offers this premium piston set to enhance engine reliability and efficiency.

• High-Strength Material: Crafted from 2618 high-strength material for superior durability and performance.
• Quiet Start-Ups: Offset wrist pin design minimizes noise during engine start-ups.
• Premium Pins: Includes a .210” wall Premium Chrome Moly pin (Standard Series) or a .210” wall 9310 alloy pin (Extreme Duty Series) for added strength.
• Pressure Balance Groove: Features a pressure balance groove to improve piston stability and efficiency.
• Valve Accommodation: Designed to accommodate +1mm valve sizes for enhanced engine performance.
• Top-Quality Rings: Comes with premium steel top rings, Napier seconds, and round wire locks for optimal sealing and reliability.
• Recommended Clearance: Piston clearance of .0035” measured .850” from the bottom of the oil ring for precise fitment.

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

• Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
• High-strength 2618 material for exceptional durability.
• Offset wrist pin for quiet start-ups.
• Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
• Pressure balance groove for enhanced performance.
• Accommodates +1mm valve sizes for customization.
• Premium steel top rings with Napier seconds and round wire locks included.
• Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

• Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
• Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
• Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
• Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.