BMW 2 Series F22 (2014+)

Replacing your wiper blades every few months is important to ensure you always have the best road clarity possible. Bosch wiper blades will offer great life-span and will remain streak free longer than most other brands.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

*Brand new HPFP - No Core Charge!*

The High Pressure Fuel Pump (HPFP) is a point of weakness in many BMW engines and fuel systems. If this goes it will prevent your car from running or starting due to fuel starvation. Restore your fuel system's operation with high quality OEM Bosch fuel pump.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMW's:
F2X BMW 228i/iX
F3X BMW 320i/iX 328i/iX 420i/iX 428i/iX
F10 BMW 528i/iX
E84 BMW X1 28i/iX
F25 BMW X3 28i/iX
F26 BMW X4 28iX
F15 BMW X5 40eX
E89 BMW Z4 28i

BMW B46 B48 B58 Mass Air Flow Sensor is essential for optimal engine performance and efficiency. This sensor regulates the amount of fuel delivered to the injectors based on the volume of air entering the intake. A malfunctioning or poorly maintained MAF sensor can lead to decreased engine performance and reduced fuel efficiency. For reliable performance and precise fuel management, replacing a faulty MAF sensor with a high-quality unit from Turner Motorsport is crucial.

• Optimal fuel management: Regulates fuel delivery based on air volume for efficient engine operation.
• Enhanced performance: Ensures the engine runs smoothly, maximizing power and responsiveness.
• Improved fuel efficiency: Helps maintain proper fuel consumption for better gas mileage.
• High-quality construction: Designed to meet or exceed OEM standards for reliable performance.
• Direct replacement: Perfect fit for BMW B46, B48, and B58 engines.

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G