BMW 2 Series F22 (2014+)

Replacement N55 Performance Filter, No Hardware

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

90mm Black M14 BMW 5 Lug Hex Head Stud Kit - APEX

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:26171623

Part#: HW-APX-M14125-90

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

Upgrade your BMW race car with a stud conversion kit from [Brand Name] for enhanced strength, safety, and improved pit stop times. Even for non-race cars, stud conversions streamline wheel installation and removal, eliminating the need to align holes before threading lug bolts.

Enhanced strength and safety
Improved pit stop times
Simplified wheel installation and removal
Versatility with extended length wheel studs
Reduced wear on hub threads
Long-term durability and safety
Simplified maintenance and improved efficiency

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis & ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

Burger Motorsports Performance Intake - Blue Filter - F22 F87 2 Serie...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California. For vehicles equipped with an automatic transmission only.

T#:556781

Part#: BMS-F3X-N55-INT

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

Adds up to 10+ Horsepower
Dramatic sound improvement
Super fast install and removal
Improves throttle response
Retains OEM airbox base as a heat shield
Retains OEM cold air ducting
Looks great under the hood
Cleanable and reusable filter
Made in the USA

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

APEX ARC-8 17x8.5" ET40 Hyper Black Wheel 17.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:341792

Part#: ARC81785ET40HBK

Ships in 3 Business Days

Sale - Save 15% $ 339.00

This product was last offered at the strikethrough price on
06-30-2026

$ 288.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 339.00

This product was last offered at the strikethrough price on
06-30-2026

$ 288.15 USD

Add to Wish List

Active Autowerke GESI Catted Race Downpipe - BMW F3X F22/23 B58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
This Fits 2024 and Earlier Models Only!

T#:638600

Part#: 11-062

In Stock

5% off MSRP $ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,424.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include NO CEL when using this downpipe GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for 500 to 850 hp applications Withstands up to 1500° F Can reach operational efficiency within 9 seconds of startup Easily bolts-on – no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA certified for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESi® proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2 year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida

Show More Show Less

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637547

Part#: BMS-DSBB-F

Ships in 2 Business Days

Starting at $ 129.00 USD

Add to Wish List

Starting at $ 129.00 USD

Add to Wish List

The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.

Show More Show Less

Active Autowerke Aflow Catted Race Downpipe - BMW F3X F22/23 B58 3.0L...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40004859

Part#: 11-062A

In Stock

5% off MSRP $ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD

Add to Wish List

Qty

5% off MSRP

$ 1,199.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,139.99 USD

Add to Wish List

For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. The F Chassis B58 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance. Features Include: NO CEL for catalytic efficiency when using this downpipe Active EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment 4.50" diameter piping allows for maximum power output Quicker turbo spool Rated for up to 800 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability Active proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5-Year / 50,000 Mile Warranty (on shell and tube ends) and 2-Year / 25,000 Mile Warranty on the Catalytic core to original purchaser only - NOTE: warranty will be null and void if your car has excessive burble (greater than stock) as that physically destroys the catalytic core Made in Miami, Florida

Show More Show Less

APEX EC-7 18x8.5" ET45 Race Silver Wheel 19.55lbs -PROFILE 1 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180751

Part#: EC71885ET45RS

In Stock

$ 389.00 USD

Add to Wish List

Qty

$ 389.00 USD

Add to Wish List

18x8.5" ET45 Race Silver APEX EC-7 Wheel 19.55lbs

Wheel Specs
Fitment:	Front or Rear
Size:	18x8.5"
Offset (mm):	47
Weight (lbs):	19.55
Profile:	1, minimal dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Catted Downpipe - F3X F22/23 F87 N55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:599319

Part#: 11-040-C

In Stock

$ 1,424.99 USD

Add to Wish List

Qty

$ 1,424.99 USD

Add to Wish List

BMW introduced a new valvetronic, single turbo version of its direct-injection engine for the F-Chassis models beginning in 2012. The Active Autowerke N55 downpipe for the M235i, 335i, 435i and M2 helps unleash some of the potential that is restricted by the OEM downpipe. Turbochargers are powered by spent exhaust gases created during the combustion process. The quicker these gases are evacuated, the better. Unfortunately, the factory down pipe in the N55 is quite restrictive, which results in slower exhaust gases and slower turbo spool. The Active Autowerke F-Chassis N55 Signature down pipe utilizes 3.5” diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. This variant includes a 4.5" high flow GESI catalytic converter that will NOT produce a CEL! The GESi® G-Sport Ultra High Output Catalytic Converter features full 304 stainless steel construction, including the substrate. GESi® UHO-Series Catalytic Converters are EPA certified in 49 states and fully OBD2 compliant. GESi® proprietary precious metal loading technology ensures greatly reduced emissions, eliminating most "Check Engine Lights". These high flow catalytic converters outperform stock converters and provide a reliable solution to the most common catalytic converter problems. The GESi® UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Please Note: These catalytic converters are not legal for use on vehicles registered in the state of California as a result of California Vehicle Code Section 27156 and 38391.

Show More Show Less

APEX ARC-8 18x8.5" ET45 Wheel - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180775

Part#: ARC81885ET45SMBK

Ships in 3 Business Days

Sale - Save 15% $ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

Wheel Specifications Style: ARC-8 Size: 18x8.5" Offset (mm): ET45 Color: Satin Black APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page! Price is per wheel.

Show More Show Less

Universal BMW Jack Pad Red - Set Of 4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9803960

Part#: BMWJACKPADRED4

Ships in 2 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
Prevents damage to rocker panels or vehicle undercarriage
Made from solid billet aluminum for durability
Engraved Burger Motorsports logo for authenticity
Honeycomb grip pattern for stability during use

Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW F22/23 F3X G01/G02 Gen1...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:587915

Part#: JB4-B58

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The JB4 is the most advanced and highly featured tuning system available for your B58 and B48 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58 and up to 40hp to the wheels (55hp crank) for a B48, gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. The JB4 automatically detects between the B46, B48, and B58 models at boot up making installation and setup a snap.

Show More Show Less

Digital Oil Pressure Gauge EVO Series - 0-150 Psi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389617

Part#: 216EVOEOP.PSI

In Stock

$ 124.99 USD

Add to Wish List

Qty

$ 124.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Pressure Guage (0-150 PSI)
Instructions
Mounting hardware
Decals
Premium Electric Sender
Wiring harness adapter
Dual color display (Blue or Red)

Show More Show Less

BMW N54 N55 Oil Cooler Valve - Red Burger Motorsport Sport (4/2007+) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588633

Part#: OILVALVE-RED

Ships in 2 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

This simple engine oil cooler valve from Burger Motorsports increases flow to your fender mounted engine oil/air heat exchanger resulting in lower engine oil temperatures and more consistent performance during heavy throttle. Less restrictive than the spring-loaded units. Installs in minutes and is fully reversible. CNC machined for a precise fit and anodized for protection. Made in the USA. Requires BMW's external sport engine oil cooler which is standard on most 2008+ models, optional on 2007 E9x models. FEATURES AND BENEFITS Easily lower engine oil temperature Stock oil cooler will work more efficient More consistent performance CNC Machined for a perfect fit Made in USA

Show More Show Less

Burger Motorsport Performance Intercooler - N20 N55 - Stepped Core ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556817

Part#: BMS-F-N55N20INTC

Back Ordered

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

Looking to upgrade your intercooler? This Burger Motorsport intercooler is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N20/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler. BMS replacement intercoolers are a direct replacement for your factory intercooler and are fully reversible. All required hardware is included. Dimensions: 21" x 6" first step x 2.5" 2nd step x 5" *Not for sale or use in the state of California.

Show More Show Less

BMS Oil Catch Can - F-Chassis B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:600275

Part#: BCC-B58

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that F Chassis B58 BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffle systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned in to place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Triple Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Triple Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

APEX ARC-8 18x8.5" ET38 Race Silver Wheel 18.45lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180782

Part#: ARC81885ET38RS

Ships in 5 Business Days

Sale - Save 15% $ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

18x8.5" ET38 Race Silver APEX ARC-8 Wheel 18.45lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	18x8.5"
Offset (mm):	38
Weight (lbs):	18.45
Profile:	Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

EVO Series Digital Oil Temperature Gauge - 100-300°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389634

Part#: 216EVOOT.F

Ships in 1 Business Day

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Temperature Guage (100-300 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Blue or Red)

Show More Show Less

EVO Series Digital Water Temperature Gauge - 80-280°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389626

Part#: 216EVOWGWT.F

Ships in 2 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Water Temperature Guage (80-280 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Green or White)

Show More Show Less

18x9" ET30 Anthracite APEX EC-7RS Forged Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:11170593

Part#: EC7RS189ET30AN

Ships in 5 Business Days

$ 709.00 USD

Add to Wish List

Qty

$ 709.00 USD

Add to Wish List

APEX ARC-8 18x8.5" ET38 Anthracite Wheel 18.45lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180781

Part#: ARC81885ET38AN

Ships in 5 Business Days

Sale - Save 15% $ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 379.00

This product was last offered at the strikethrough price on
06-30-2026

$ 322.15 USD

Add to Wish List

18x8.5" ET38 Anthracite APEX ARC-8 Wheel 18.45lbs

Wheel Specs
Fitment:	Front or Rear
Size:	18x8.5"
Offset (mm):	38
Weight (lbs):	18.45
Profile:	Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Active Autowerke Downpipe With G-Sport Cat - N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5886981

Part#: 11-079

Ships in 3 Business Days

$ 1,424.99 USD

Add to Wish List

Qty

$ 1,424.99 USD

Add to Wish List

The Active Autowerke F-Chassis N20 Signature down pipe utilizes 3.5 diameter stainless steel piping in order to provide more power, quicker spool, and extreme durability. The GESi UHO-Series Catalytic Converters are rated for engines putting out between 500 and 850 horsepower while maintaining a high flow capacity. The reduced back-pressure from this high flow catalytic converter will allow you to maximize your engines horsepower without the harmful emissions. Say goodbye to Check Engine Lights and failed emissions tests! Features: NO CEL when using this downpipe Designed to be as unrestrictive as possible GESI EPA registered high flow and fully OBD2 compliant High flow 4" GESI cat with 3.50" piping allows for maximum power output Quicker turbo spool - improved power over stock Rated for 350 to 500 hp applications Withstands up to 1500 F Can reach operational efficiency within 9 seconds of startup Easily bolts-on no cutting or welding required Durable construction from TIG welded 304 stainless steel Precise fitment Modular design for later upgrades Made in Miami, Florida Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California Full 304 stainless steel construction 304 stainless steel substrate in the catalytic converter is furnace braised to the mantle for outstanding durability GESi proprietary precious metal loading technology ensures greatly reduced emissions Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise ACTIVE AUTOWERKE N20 SIGNATURE DOWNPIPE BENEFITS The speed of a turbo's impeller wheel is limited by exhaust back pressure. A larger down pipe relieves some of this pressure, resulting in quicker and more efficient spool. With Active Autowerke's Signature downpipe, your N20 can rev quicker, and deliver more horsepower and torque. Minimizing back pressure while remaining daily drive-ability was the goal of our N20 downpipe. Owners can now upgrade to a product that is affordable, reliable, and easy to install. After months of research and development, our engineers settled on a 3.5 diameter pipe which utilizes the least number of bends possible. However, the Signature N20 down pipe still fits easily into the OEM location, with a painless installation process. Constructed entirely from 304 stainless steel with 1.5MM wall thickness, we are confident that you'll be pleased with how robust and durable this down pipe is. Trouble-free installation and a long lifespan ensure that you'll enjoy many miles of performance with your N20!

Show More Show Less

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For RWD models only

T#:397303

Part#: 15-004

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i

Show More Show Less

45mm Electric Boost Gauge - 30inHg~30 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389622

Part#: 175CLSMARBO-R.PS

In Stock

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time.

Key Features:

270 degree dial sweep
Track tested and race proven
Full gauge sweep on start up
Black face, red needle, amber backlit
30inHg to 30PSI
45mm diameter
Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.

Show More Show Less

Burger Motorsports JB4 Tuner - F-Chassis N20 w/ Electronic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with electronic waste gate; not for sale or use in the state of California.

T#:600105

Part#: JB4-N20EW

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 50 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!

Show More Show Less

52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:587021

Part#: 216BFWAEBOSM.PSI

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

Accurately monitors boost pressure from 30inHg to 30 PSI
Stylish amber and white display for clear visibility
Enhances vehicle performance monitoring capabilities
Easy installation process
Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less

Prosport Electrical Oil Pressure Gauge - 0-100 Psi

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:584307

Part#: 216BFWAOPSM.PSI

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

Improves engine monitoring beyond factory gauge capabilities
Early detection of potential issues for preventive maintenance
Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
Compatible with BMW models for easy installation and reliable performance
Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.

Show More Show Less

EVO Series Digital Volt Gauge - 8-18v

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389632

Part#: 216EVOVO

In Stock

$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD

Limited Qty Sale

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Fuel Pressure Guage (8-18v)
Instructions
Mounting hardware
Decals
Dual color display (Blue or red)

Show More Show Less

EVO Series Universal Digital Water Temperature Gauge - 80-280°F ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389633

Part#: 216EVOWT.F

In Stock

$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 78.99

This product was last offered at the strikethrough price on
07-01-2026

$ 71.99 USD

Limited Qty Sale

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Water Temperature Guage (80-280 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Blue or red)

Show More Show Less

S1N20 - N20/N26 Stage 1 (All N20/N26)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:402632

Part#: S1-N20

Ships in 2 Business Days

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

Gains of up to 35HP and 50lb/ft! This plug and play BMW tuner attaches to two easy to access sensors in the engine bay and works with your factory DME tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance! Installation is very discrete and it is quickly removed without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Stage 1 BMW Tuner Features & Benefits Improves 0-60 times and 1/4 mile times Quick Plug & Play Installation Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Not VIN locked and can be removed without a trace and resold down the road Made in the USA Not for sale or use in the state of California.

Show More Show Less

Burger Motorsports F-Series N55 JB4 - Electronic Wastegate - F22/23 F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:567659

Part#: JB4-F30-EWG

In Stock

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Ready to take your F chassis N55 BMW to the next level? How about up to 60hp to the wheels (80hp crank) on a completely stock car or up to 100hp to the wheels (120hp crank) on a fully modified car? The JB4 features a simple plug and play installation harness for easy installation and includes many features not found on any other tune. Including the ability to enable/disable the tuning from the drivers seat, gear dependent boost control to help with traction, autotuning for E85 mixtures, built-in diagnostic code reading/deleting, expanded engine safety systems, free firmware updates, in-dash boost gauge, the ability to control the exhaust flapper using your BC button, and much more. The JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. For more advanced enthusiasts the BMS DATA or JB4 Mobile cable allows you to connect a laptop or smartphone for additional gauges, data logging, and free firmware updates as we add new features and maps. The JB4 is a full plug and play device that installs and removes in minutes at home without special tools and unlike flash maps that permanently write over your DME with the JB4, your DME is never aware it's running more than the factory power levels. And when you're ready to change things up the JB4 is not VIN locked and can be moved to your next vehicle or resold. Made in the USA. 5 Year Warranty. Note for electronic wastegate models: the EWG add on connector remains optional and can be purchased separately from BMS's upgrades for higher HP applications where direct EWG control is beneficial such as those using an integrated WMI kit or larger turbo.

Show More Show Less

EVO Series Digital Oil Temperature Gauge - 100-300°F

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389627

Part#: 216EVOWGOT.F

In Stock

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

Digital Oil Temperature Guage (100-300 degrees)
Instructions
Mounting hardware
Decals
Temperature sender - 1" long with 1/8" NPT threads
Dual color display (Green or White)

Show More Show Less

Black Forest Industries Billet Heavy Weight Shift Knob - Alcantara Or...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391722

Part#: GS2B

In Stock

Starting at $ 184.99 USD

Add to Wish List

Starting at $ 184.99 USD

Add to Wish List

This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

Choose from soft alcantara or perforated air leather with either a silver or black anodized base.

Show More Show Less

Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389614

Part#: 216EVOWGBO.PSI

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

52mm Digital Boost Pressure Guage (30inHg - 35 PSI)
Instructions
Tubing Kit
T-adapter
Premium Electric Sender
Mounting hardware
Green or White display

Show More Show Less

Prosport EVO Series Digital Boost Gauge - 30 InHg/35 PSI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:389613

Part#: 216EVOBO.PSI

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.

Kit Includes:

52mm Digital Boost Pressure Guage (30inHg - 35 PSI)
Instructions
Tubing Kit
T-adapter
Premium Electric Sender
Mounting hardware
Blue or Red display

Show More Show Less

Apex VS5RS 18x8.5" Square Forged Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19329485

Part#: VS5RS188540SQ

Ships in 5 Business Days

Starting at $ 2,876.00 USD

Add to Wish List

Starting at $ 2,876.00 USD

Add to Wish List

Apex VS5RS 18x8.5" ET40 Wheel Set Apex 8.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Burger Motorsports JB4 Tuner - F Series N55 w/ Pneumatic Wastegate ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not for sale or use in the state of California.

T#:402615

Part#: JB4-F30-PWG

Ships on Jul 24, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 60 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today! Burger Motorsports Tuning Products are for off-road racing use only - NOT FOR SALE OR USE IN CALIFORNIA!

Show More Show Less

APEX ARC-8 17x8.5" ET40 Anthracite Wheel 17.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180809

Part#: ARC81785ET40AN

Ships in 5 Business Days

Sale - Save 15% $ 329.00

This product was last offered at the strikethrough price on
06-30-2026

$ 279.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 329.00

This product was last offered at the strikethrough price on
06-30-2026

$ 279.65 USD

Add to Wish List

17x8.5" ET40 Anthracite APEX ARC-8 Wheel 17.2lbs

Wheel Specs
Fitment:	Front or Rear
Size:	17x8.5"
Offset (mm):	40
Weight (lbs):	17.2
Profile:	Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX ARC-8 18x8.5" ET38 Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386999

Part#: ARC8188538X4

Ships in 5 Business Days

Sale - Save 15% $ 1,516.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,288.60 USD

Add to Wish List

Sale - Save 15%

$ 1,516.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,288.60 USD

Add to Wish List

Apex ARC8 18x8.5" ET38 Square Wheel Set APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Burger Motorsport JB+ Quick Install Tuner - F-Chassis N20 N55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:402676

Part#: F-JB+

Ships in 2 Business Days

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The simplest and easiest to use of all the Burger Motorsports tuners, the JB+ is one of the quickest ways to add power to your BMW. Simple plug-and-play installation takes less than one minute and does not require ECU access. Check out the install guide below, and see for yourself! Best of all, there's no negative effect on fuel economy under normal driving conditions. Expect gains of up to 35 wheel horsepower and 45 lb/ft of torque at the wheels. Adding extra horsepower doesn't get any easier than this! Installs in under 1 minute No ECU access required No impact on fuel economy under normal conditions Gains of 25 WHP / 35 WTQ on N20 turbo four-cylinder Gains of 35 WHP / 45 WTQ on N55 turbo six-cylinder Note: For off-road racing use only. Not for sale or use in California.

Show More Show Less

APEX ARC-8 17x8.5" ET40 Satin Black Wheel 17.2lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:180807

Part#: ARC81785ET40SMBK

Ships in 2 Business Days

Sale - Save 15% $ 329.00

This product was last offered at the strikethrough price on
06-30-2026

$ 279.65 USD

Add to Wish List

Qty

Sale - Save 15%

$ 329.00

This product was last offered at the strikethrough price on
06-30-2026

$ 279.65 USD

Add to Wish List

17x8.5" ET40 Satin Black APEX ARC-8 Wheel 17.2lbs

Wheel Specs
Fitment:	Front or Rear
Size:	17x8.5"
Offset (mm):	40
Weight (lbs):	17.2
Profile:	Flat, not concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 18x9.5" ET35 Square Track Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:387026

Part#: EC7189535X4

Ships in 2 Business Days

Starting at $ 1,636.00 USD

Add to Wish List

Starting at $ 1,636.00 USD

Add to Wish List

Apex EC-7 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX SM-10 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395583

Part#: SM1018930SQ

Ships in 5 Business Days

Starting at $ 1,736.00 USD

Add to Wish List

Starting at $ 1,736.00 USD

Add to Wish List

Apex SM-10 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX EC-7 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395578

Part#: EC718931SQ

Ships in 5 Business Days

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

Apex ARC8 18x9" ET31 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" VS5RS APEX Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19428670

Part#: VS5RS181025SQ

Ships in 5 Business Days

Starting at $ 2,824.00 USD

Add to Wish List

Starting at $ 2,824.00 USD

Add to Wish List

Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

18" APEX EC-7 Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386838

Part#: F22EC7188595

Ships in 7 Business Days

Starting at $ 1,596.00 USD

Add to Wish List

Starting at $ 1,596.00 USD

Add to Wish List

APEX ARC-8 18" Staggered Wheel Set -- 18x8.5" / 18x9.5" This set of 8.5" and 9.5" ARC-8 wheels is an easy staggered fitment for the E82 128i/135i. These are a direct fit with no spacers or fender rolling required. We use an 8.5" ET45 on the front and a 9.5" ET58 on the rear. These wheels were designed specifically for the high offset required on the E82. Maintains stock-like handling characteristics, tires can only be rotated left to right. Maximizes both front and rear tire width. Staggered setups are recommended for highly tuned cars that need extra rear tire width in order to control their increased power output. Direct fit with stock suspension, lowering springs, and a variety of aftermarket coilovers. 5mm front spacers required for certain aftermarket suspensions. 245/35-18 front tires can fit with 5mm front spacers and approximately -1.5 degrees of camber or more. Larger front spacers may be required for certain aftermarket suspensions. 255/35-18 front tires can fit with 5mm front spacers and approximately -2.5 degrees of camber or more. Larger front spacers may be required for certain aftermarket suspensions. 275/35-18 rear tires can be used with negative camber and/or rolled fenders. Aggressive tire compounds that run wide often rub with this fitment and the passenger side rear wheel well liner must be periodically checked to ensure the fuel filler neck area is not rubbing. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Recommended for most types of street and performance driving. Allows proper front-to-rear tire rotation to extend tire life & improve handling balance. May require minimal front negative camber. 235/45-17 tires can also be used for better tire availability but are more likely to rub with compounds that run wide or cars that are lowered. 245/40-17 tires can fit, but will require approximately -1.5 degrees or more of front camber. Rear rolled fenders and/or rear negative camber may also be required.

Show More Show Less

APEX ARC-8 18x9.5" ET35 Square Track Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:387010

Part#: ARC8189535X4

Ships in 5 Business Days

Sale - Save 15% $ 1,596.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,356.60 USD

Add to Wish List

Sale - Save 15%

$ 1,596.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,356.60 USD

Add to Wish List

Apex ARC8 18x9.5" ET35 Wheel Set Apex 9.5" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results