BMW 2 Series F22 (2014+)

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

T#:340355

Part#: MSI-M14X125

In Stock

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

330mm MOMO MOD.78 Steering Wheel

T#:301059

Part#: TMS301059

In Stock at Vendor

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

T#:27238720

Part#: NCV27043

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

Tire Valve For TPMS Systems

T#:641919

Part#: AUL1SENSOR

In Stock

Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

Qty

Sale - Save 29%

$ 60.96

This product was last offered at the strikethrough price on
05-15-2026

$ 43.02 USD

Add to Wish List

12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use

Momo Race Airleather Shift Knob - Black

T#:388419

Part#: RACAIR

In Stock

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Momo Race Airleather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black perforated Endurance leather, and a silver anodized aluminum base. The Race knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.

Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

T#:27238721

Part#: NCV27044

In Stock

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

Momo Shadow Shift Knob

T#:1787

Part#: SUBKCA

Ships on Sep 4, 2026

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Shadow Carbonlook/Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. This knob features a carbon fiber style top and high quality black airleather with black anodized base. The Shadow knob favors over-palm shifting (the palm over the top of the knob). This knob is 4.5oz, slight heavier than stock. Comes with installation kit, ready to install.

Show More Show Less

Autosol Autosol Convertible Top Sealant and Protectant

T#:580275

Part#: AS7800

Back Ordered

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

The proper protection for your convertible top.

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMC Performance Air Filter - 230i, 320i/i xDrive, 330e/i/i xDrive, 34...

T#:398738

Part#: FB928/20

In Stock at Vendor

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

MOMO START Racing seat - ALL BMW & MINI

T#:583211

Part#: 1070BLK

Ships on Aug 17, 2026

$ 485.00 USD

Add to Wish List

Qty

$ 485.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.

Show More Show Less

MOMO Mod.08 Steering Wheel - Black - 350mm Suede

T#:343229

Part#: R1908/35S

Ships on Aug 18, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.

Show More Show Less

Extended Spark Plug Socket

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ...

T#:27238726

Part#: NCV27030

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

T#:398733

Part#: FB740/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ...

T#:27238727

Part#: NCV27031

Ships in 3 Business Days

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

MOMO MOD.78 Suede Steering Wheel - 330mm & 350mm

T#:338958

Part#: TMS1350

In Stock at Vendor

Starting at $ 279.00 USD

Add to Wish List

Starting at $ 279.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.

Show More Show Less

BMC Performance Air Filter - F22/23 228i, F3X 320i/i xDrive 328i/i xD...

T#:398727

Part#: FB702/20

In Stock at Vendor

$ 88.00 USD

Add to Wish List

Qty

$ 88.00 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

AutoLink AL529HD

T#:2914129

Part#: AL529HD

Ships in 7 Business Days

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.

Autosol Convertible Top Cleaning Kit

T#:16450

Part#: 7950

Ships in 10 Business Days

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Autosol's Convertible Top Cleaning Kit is a complete restoration kit for your canvas convertible top and plastic rear window. This package is an all-in-one solution for cleaning and protecting the fabric convertible top. Package includes Convertible Top Cleaner, Convertible Top Impregnating Agent (sealant and protectant), and Plastic Scratch Remover. First use the cleaner to remove dirt and stains. Then follow-up with the fabric treatment to preserve the color and protect against UV damage. Remove scratches, clean, and polish the plastic window back to its original clarity. Autosol is Made in Germany, and an OEM supplier to BMW for many of their Genuine BMW car care products.

Show More Show Less

3/8" Dr. Universal Impact Swivel Joint

T#:2528135

Part#: 3301D

Ships on Aug 17, 2026

5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Qty

5% off MSRP

$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Designed for impact use

14 Pc. Full Polish SAE Angle Head Wrench Set

T#:642035

Part#: 9914A

Ships on Aug 17, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

3/8" Dr. External Star Impact Socket Set

T#:5269512

Part#: 3670SED

Ships on Aug 17, 2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

CR-MO alloy steel for long life

T#:339964

Part#: TMS21537

Ships on Aug 26, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.

Show More Show Less

MOMO Nero Shift Knob - Black

T#:388415

Part#: NERBK1

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Nero shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Top Grain leather on the lower half, black enamel insert, and a rubberized top piece with the MOMO logo. The Nero knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.

Show More Show Less

MOMO Mod.88 Steering Wheel - Black - 350mm

T#:1863

Part#: TMS1863

Special Order: No Guaranteed ETA

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.

Show More Show Less

MOMO Team Steering Wheel

T#:390888

Part#: TEA-MOMO

Ships on Aug 26, 2026

Starting at $ 249.00 USD

Add to Wish List

Starting at $ 249.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Combat Evo Shift Knob - Red

T#:388410

Part#: CTERED

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

Momo Combat Anatomic Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather, red stitching, red insert, with black anodized base. The Combat knob favors two-finger or pistol grip shifting. The shape allows two or more fingers to rest under the head of the knob - a more ergonomic shape than the factory shift knobs. This knob is 6.2oz, slightly heavier than the ZHP knob. Comes with installation kit, ready to install.

Show More Show Less

MOMO Nero Shift Knob - Short

T#:598528

Part#: MOM-NERBK1-R

Special Order: No Guaranteed ETA

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

MOMO Monte Carlo Steering Wheel - Red - 350mm

T#:388364

Part#: MCL35BK3B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Tuner Steering Wheel

T#:340479

Part#: TUN35BK0B

Ships on Aug 26, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.

Show More Show Less

MOMO Daytona Racing Seat - All BMW

T#:585740

Part#: 1073KIT

Ships on Aug 26, 2026

Starting at $ 775.00 USD

Add to Wish List

Starting at $ 775.00 USD

Add to Wish List

MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport.

Show More Show Less

MOMO Prototipo Steering Wheel - Black - 350mm

T#:1040

Part#: PRO35BK2BLACK

Special Order: No Guaranteed ETA

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.

Show More Show Less

MOMO Prototipo Steering Wheel

T#:390875

Part#: PRO35BK

Ships on Sep 2, 2026

Starting at $ 269.00 USD

Add to Wish List

Starting at $ 269.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less

MOMO Monte Carlo Steering Wheel - Black - 350mm

T#:1864

Part#: MCL35BK1B

Special Order: No Guaranteed ETA

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

MOMO Monte Carlo Steering Wheel. 350mm diameter (13.8 inches). Black leather rim with black anodized center. A beautiful and classic steering wheel upgrade.

Requires a wheel hub adapter, choose one below.

Show More Show Less

MOMO Monte Carlo Steering Wheel

T#:390872

Part#: MCL35BKXB

Ships on Aug 26, 2026

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

This steering wheel combines the best of all worlds for both track/street use and racing requirements. The MOMO Monte Carlo is a seminal classic MOMO wheel design. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.

Show More Show Less