This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

Fits the following models:
F22,F23,F30,F31,F32,F33,F34,F36

ECS Tuning "Ti.22" Titanium Exhaust Tips

Enhance your vehicle's appearance with ECS Tuning "Ti.22" Titanium Exhaust Tips, renowned as the most attractive tips available. These exhaust tips come in a striking matte titanium finish with a slant cut, single wall outlet design, ensuring a visually stunning addition to your vehicle.

Engineered for durability, these tips feature chrome-plated nuts, a 304SS cap screw, and clamp, guaranteeing long-lasting performance.

Please note: Modification may be necessary for proper fitment as these tips offer UNIVERSAL fitment and are not a direct fit for your vehicle. Ensure accurate measurement before ordering to ensure compatibility.

Benefits:

• Matte titanium finish for an attractive appearance
• Slant cut, single wall outlet design
• Engineered with durable materials for longevity
• Chrome-plated nuts, 304SS cap screw, and clamp for lasting performance

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Burnt Finish - Pair

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Burnt Finish - Pair are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips feature a striking burnt-titanium-edge finish and a slant-cut, single-wall outlet for a stunning visual appeal. Engineered for durability, they include chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Eye-catching burnt-titanium-edge finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a sleek appearance
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Doing mechanical work, especially when it come to aluminum heads and engine blocks. The constant change in temperature from hot to cold with and engine may cause fasteners to be more difficult to remove and possibly stripping the threads. This tool wasn't designed to make new thread, but instead clean-up the damaged threads.

Features:

• Repairs both internal and external threads
• Used with standard metric sockets and wrenches
• Tap and Die sizes: 6x1.0 / 8x1.25 / 10x1.25 / 10x1.50 / 12x1.25 / 12x1.75 / 12x1.5 mm
• File thread pitch sizes: 0.75 / 1.00 / 1.25 / 1.50 /  1.75 / 2.00 / 2.50 / 3.00 mm

Schwaben Locking Hose Pinch-Off Pliers have adequate clamping force to effectively seal large or pressurized cooling system hoses. These pliers are ideal for clamping shut most hoses, ensuring reliability in your automotive tasks. With swivel jaws, they provide even clamping force, making them a versatile tool for various applications.

• Adequate clamping force for large or pressurized hoses
• Ideal for clamping shut most hoses
• Swivel jaws ensure even clamping force
• Versatile tool for automotive maintenance

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit http://www.p65warnings.ca.gov.

Enhance the appearance of your BMW F22 with this M-Sport style front bumper cover from ECS Tuning

Crafted to elevate your vehicle's aesthetics, this bumper features an aggressive design that will make your car stand out from the crowd.

Includes:

• Headlight washer cutouts/covers
• Center mesh grille
• Side Mesh grille
• Tow hook cover

Transform your BMW F22 into a head-turning masterpiece with this M-Sport style front bumper cover from ECS Tuning.

A failed washer pump can leave you blind in the wrong situation. Replace yours with this Bav Auto windshield washer pump to restore proper operation.

Same as 67 12 6 934 159.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.