BMW Suspension Parts for BMW 2 Series F22 (2014+)

Rear Upper Shock Mount - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:8741226

Part#: 33506862725

In Stock

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

URO Accelerating Sensor - Front - BMW F22/23 F3X F8X F25 G01 F26 G02 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:43750248

Part#: 37155A0F905

In Stock

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Accelerating Sensors failing can greatly affect the VDC (Variable Damper Control) system causing the vehicle to underperform in corners or result in a less-than-comfortable ride. This URO replacement will correct this issue and have everything performing like new. 1 sensor per shock/strut.

Show More Show Less

Performance Spring Set

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:398708

Part#: D100-0927

Ships in 4 Business Days

11% off MSRP $ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

Qty

11% off MSRP

$ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

These performance springs use increased spring rates to reduce body roll and tighten up handling, with a slight lowering to reduce the vehicle's center of gravity without rendering the car useless on the street or uncomfortable to drive on a daily basis. The higher spring rates will reduce dive under braking and squat under acceleration, making the car feel more controlled. Reduced body roll Reduced dive under braking Improved grip Lowering of 1/2" front, 5/8" rear Preset to prevent spring sag Shot-peened for stress relief Worth 2 points toward your Dinan badge For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Show More Show Less

Dinan Performance Spring Set - F22 M235i M240i xDrive

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:5175708

Part#: D100-0927S

Ships in 4 Business Days

Starting at $ 349.99 USD

Add to Wish List

Starting at $ 349.99 USD

Add to Wish List

Dinan's Performance Spring set for the F22 M235i/M240i xDrive (AWD) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the M235i/M240i by a 1/2" in the front and a full inch in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The 10% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.

Show More Show Less

BMW F30 Left Front Tension Strut

2X Entries Into Our F80 M3 Sweepstakes

T#:592248

Part#: 31126855741

In Stock

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

Control arm with ball joint

URO Front Tension Strut - Right - F22, F23, F30, F32, F33, F36 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:593200

Part#: 31126855742

In Stock

$ 81.99 USD

Add to Wish List

Qty

$ 81.99 USD

Add to Wish List

The thrust arm keeps the lower wheel straight and contacting the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. Why not replace it with the same part that originally came on your vehicle?

Show More Show Less

Dinan Performance Spring Set - F22 M235i M240i RWD

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389358

Part#: D100-0929

In Stock

Starting at $ 349.99 USD

Add to Wish List

Starting at $ 349.99 USD

Add to Wish List

Dinan's Performance Spring set for the F22 M235i/M240i (RWD) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the M235i/M240i by a 1/2" in the front and a full inch in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The 10% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.

Show More Show Less

BMW F30 Front Right Lower Control Arm

2X Entries Into Our F80 M3 Sweepstakes

T#:592247

Part#: 31126852992

Ships in 1 Business Day

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Includes bushing and ball joint

F22 235i Supplementary Ride Quality & Handling Kit

For model years 2017-2021 For mofel years 2014-2016

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389359

Part#: D193-2201

In Stock

11% off MSRP $ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 155.99 USD

Add to Wish List

Qty

11% off MSRP

$ 175.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 155.99 USD

Add to Wish List

Improve the handling of your BMW with the Turner Motorsport Dinan Performance Springs Kit, designed to work seamlessly with Dinan performance springs while maintaining ride quality. This kit includes progressive-rate bump stops, optimizing spring rate for enhanced mechanical grip. Prevent bottoming out and binding with the maximized suspension travel provided by these bump stops. The kit comes with all necessary hardware for a straightforward installation, ensuring a hassle-free upgrade experience.

Progressive-Rate Bump Stops: Enhance handling by providing a progressive-rate solution for optimal performance.
Optimizes Spring Rate: Improves mechanical grip by optimizing the spring rate.
Maximizes Suspension Travel: Ensures full suspension travel, preventing bottoming out and binding.
Prevents Bottoming Out and Binding: Enhances performance while preventing potential issues.
All Hardware Included: Simplifies installation with comprehensive hardware included.
Worth 1 Point Toward Your Dinan Badge: Contribute to your Dinan badge with this performance-enhancing kit.

Upgrade your BMW's handling dynamics with the Turner Motorsport Dinan Performance Springs Kit, backed by Dinan's commitment to excellence and a four-year, 50,000-mile warranty.

Show More Show Less

Dinan Performance Spring Set - BMW F22 228i 230i, F32 428i 430i RWD ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:393819

Part#: D100-0928

Ships in 3 Business Days

11% off MSRP $ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

Qty

11% off MSRP

$ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD

Add to Wish List

Dinan's Performance Spring set for the F22 228i/230i (RWD) and F32 428i/430i (RWD) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicles by at least 1/2" (drop varies by application) for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The substantial increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at speeds as low as 20 mph up to the top speed of the vehicle.

Show More Show Less

Front Lower Control Arm - Left

2X Entries Into Our F80 M3 Sweepstakes

T#:592246

Part#: 31126852991

In Stock

$ 60.99 USD

Add to Wish List

Qty

$ 60.99 USD

Add to Wish List

Includes bushing and ball joint

Adjustable Rear Upper/Inner Camber Bushings

T#:600206

Part#: 193926-3H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - F22...

T#:389642

Part#: 192616-2N

Special Order: No Guaranteed ETA

$ 695.00 USD

Add to Wish List

Qty

$ 695.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Upper spring perch: OEM-size, 60mm, and 2.5" included
Bearings: urethane OEM-type center bushing; lubricated radial thrust bearing on spring perch

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

KMAC camber kits are the most complete kits on the market, with all of the common spring perch options and strut hardware included. The OEM size spring perch as well as 60mm and 2.5" spring isolators are included which makes it easy to upgrade from stock struts to coil overs without having to buy new camber plates. Or swap springs on your coil overs between 60mm and 2.5" without buying additional upper perches. Also included are the most common strut pin hardware - 14mm lower bearing adapters and 12x1.5, 12x1.75, and 14x1.5 top nuts. This takes the guesswork out of ordering the correct hardware for your strut type. The urethane main bushing is also replaceable and the camber plate parts are made from 7075-grade aluminum for a lifetime of camber plate use.

Fitment Note 1: replaces factory BMW strut mount with 3 mounting bolts (up to 12/2014 prodution). Not for cars with 5-bolt strut mounts.

Fitment Note 2: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-MAC includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. Basic instructions are included but professional installation is required. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
-12/2014 F22 BMW 228i 228i xDrive M235i M235i xDrive
2012-12/2014 F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2013-12/2014 F31 BMW 328i xDrive 328d xDrive - Wagon
-12/2014 F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2013-12/2014 F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
2013-12/2014 F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
-12/2014 F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
Not for cars with Adaptive M Suspension option code S2VFA

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

F22, F3X Dinan Monoball Front Thrust Arm Bushings (Pair)

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389095

Part#: D280-0014

Ships in 5 Business Days

11% off MSRP $ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD

Add to Wish List

Qty

11% off MSRP

$ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 425.99 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an F22 2-series or F3X 3/4-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F34 BMW 328i 335i - Gran Turismo
2012+ F36 BMW 428i 435i - GranCoupe

Show More Show Less

F22, F3X RWD Dinan Adjustable Sway Bar Set

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389105

Part#: D120-0585

Ships in 2 Business Days

11% off MSRP $ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan F3X Sway Bar Specs:
F: 28mm, hollow, 3-position adjustable, urethane bushings and brackets included
R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F36 BMW 428i 435i - GranCoupe

Show More Show Less

Rear Adjustable Control Arms BMW F2x, F3x With FLURO Motorsport Beari...

T#:26871572

Part#: IRPACNA-FXMS

Special Order: No Guaranteed ETA

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!

Show More Show Less

Front Control Arm - Right

2X Entries Into Our F80 M3 Sweepstakes

T#:637204

Part#: 31126854728

Ships in 1 Business Day

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

URO Front Control Arm Bushing - BMW F22/23 F3X xDrive

2X Entries Into Our F80 M3 Sweepstakes

T#:638157

Part#: 31126854729

In Stock

$ 37.80

This product was last offered at the strikethrough price on
08-27-2026

$ 32.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 37.80

This product was last offered at the strikethrough price on
08-27-2026

$ 32.99 USD

Limited Qty Sale

Add to Wish List

Your front tension strut control arms utilize a fluid filled bushing designed for comfort. These bushings can crack or split, allowing the fluid to leak, resulting in a bushing that offers poor comfort and handling. Replace it with a new bushing from URO to restore comfort and handling.

Show More Show Less

URO Control Arm Bushing for E82, E88, E9x

2X Entries Into Our F80 M3 Sweepstakes

T#:37959693

Part#: 33326792553

Ships in 1 Business Day

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Over time bushing crack dry rot and deteriorate, replace these bushings to restore your vehicle's original handling feel. Each vehicle requires two!

URO Hydrobearing Control Arm Bushing - BMW F22/23 F3X RWD

2X Entries Into Our F80 M3 Sweepstakes

T#:593202

Part#: 31126855743

Ships in 1 Business Day

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

For front upper control arm

URO Rear Sway Bar Bushing - BMW F22/23 F3X (13mm Sway Bar)

For vehicles with Standard Suspension or M Sport Suspension - Does not fit vehicles wit...

2X Entries Into Our F80 M3 Sweepstakes

T#:5760254

Part#: 33356792197

Ships in 1 Business Day

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

The sway bar in your vehicle connects both of the lower control arms together. During cornering, the wheel on the inside tends to want to roll under. The sway bar acts as a spring and keeps this from happening. One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings

Show More Show Less

Front Control Arm - Left

2X Entries Into Our F80 M3 Sweepstakes

T#:637203

Part#: 31126854727

Ships in 1 Business Day

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Rear Adjustable Upper Camber Arms BMW F2x, F3x With FLURO Motorsport ...

T#:26871574

Part#: IRPRAUCA-FXMS

Special Order: No Guaranteed ETA

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!

Show More Show Less

Rear Adjustable Toe Arms BMW F2X, F3X With FLURO Motorsport Bearings ...

T#:26871571

Part#: IRPRATA-FXMS

Special Order: No Guaranteed ETA

$ 442.99 USD

Add to Wish List

Qty

$ 442.99 USD

Add to Wish List

IRP has been a leader in performance BMW suspension upgrades and has released a new line of suspension components for BMW's F-Chassis cars. Included are FLURO Motorsports Bearings for unmatched performance and reliability on the street or track!

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 4, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less