BMW Drivetrain Parts for BMW 2 Series F22 (2014+)

Automatic Transmission Service Kit

10X Entries Into Our F80 M3 Sweepstakes
For GA8HP70Z or GA8HP45Z automatic transmissions

T#:5389733

Part#: 24118612901TMSKT

In Stock

Sale - Save 21% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.18 USD

Add to Wish List

Qty

Sale - Save 21%

$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 171.18 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles

Show More Show Less

IRP Universal Short Shifter V3 CS (Centering Spring) - Black Reverse ...

T#:569029

Part#: IRPSS-3BCS

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. The Universal Short Shifter V3 CS was developed to express their belief and compete with the much more expensive CAE Ultra Shifter, but at half the cost. The entire shifter assembly is made from all anodized aluminum and stainless steel for strength, durability, and looks. The V3 CS is a perfect replacement when looking for a shifter that gives you short, crisp, precise shifts with a 60% reduction in travel, plus a new return to center feature.

Show More Show Less

IRP BMW Short Shifter Dust Boot - For IRP V2, V3 & V3 CS Short Shifte...

T#:569037

Part#: IRPSS-DB

In Stock

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

Developed specifically for the IRP V2, V3, and V3 CS Short shifters, this Dust Boot mounts to the short shifters base to keep out dirt and noise that would normally come through the otherwise unprotected opening in your center console.

Show More Show Less

Automatic Transmission Service Kit - BMW 8HP F & G-Chassis- Liqui Mol...

10X Entries Into Our F80 M3 Sweepstakes

T#:31191945

Part#: TMS8HPATSKT1

In Stock

Sale - Save 2% $ 209.99

This product was last offered at the strikethrough price on
10-01-2026

$ 206.84 USD

Add to Wish List

Qty

Sale - Save 2%

$ 209.99

This product was last offered at the strikethrough price on
10-01-2026

$ 206.84 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Liqui-Moly Top Tec 1800 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

Bremmen Automatic Transmission Pan With Transmission Filter - F22 F30...

10X Entries Into Our F80 M3 Sweepstakes
For GA8HP70, GA8HP76, GA8HP75, GA8HP51, GA8HP50, or GA8HP45Z automatic transmissions - Does not fit GA8P Hybrid Transmissions

T#:579886

Part#: 55182

In Stock

Sale - Save 16% $ 138.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.99 USD

Add to Wish List

Qty

Sale - Save 16%

$ 138.99

This product was last offered at the strikethrough price on
05-03-2026

$ 116.99 USD

Add to Wish List

GA8HP 8 speed automatic transmission. Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This item fits the following BMWs: E71,E89 Z4,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Show More Show Less

Automatic Transmission Service Kit - With Aluminum Oil Pan

10X Entries Into Our F80 M3 Sweepstakes

T#:53644251

Part#: URO011913KT

In Stock

Sale - Save 1% $ 259.99

This product was last offered at the strikethrough price on
10-13-2026

$ 256.30 USD

Add to Wish List

Qty

Sale - Save 1%

$ 259.99

This product was last offered at the strikethrough price on
10-13-2026

$ 256.30 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure.

Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

T#:27238721

Part#: NCV27044

Ships in 3 Business Days

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

Ultimate Clutch Pedal refresh kit for various BMW Models

10X Entries Into Our F80 M3 Sweepstakes

T#:41255915

Part#: UCP301TKT

Back Ordered

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

Includes brand-new guides, spring, and hardware for a complete, hassle-free installation—everything needed for a full OEM-quality upgrade.

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

T#:27238720

Part#: NCV27043

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

Burger Motorsports Differential Support Bracket Brace - F-Chassis BMW...

T#:637547

Part#: BMS-DSBB-F

Back Ordered

Starting at $ 129.00 USD

Add to Wish List

Starting at $ 129.00 USD

Add to Wish List

The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Brushed Finish - ...

T#:1002349

Part#: 228053410

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Raw Finish - BMW ...

T#:1002348

Part#: 228053400

Back Ordered

$ 296.99 USD

Add to Wish List

Qty

$ 296.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Black ...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241340

Part#: 24118612901T3KT

Back Ordered

$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!

Show More Show Less

Front and Rear Differential Service Kit - F3x

10X Entries Into Our F80 M3 Sweepstakes

T#:56327180

Part#: F3XAWDFDKT5

In Stock

Sale - Save 2% $ 104.99

This product was last offered at the strikethrough price on
09-21-2026

$ 103.33 USD

Add to Wish List

Qty

Sale - Save 2%

$ 104.99

This product was last offered at the strikethrough price on
09-21-2026

$ 103.33 USD

Add to Wish List

This kit combines Red Line 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials

ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel - FX250 Stage ...

10X Entries Into Our F80 M3 Sweepstakes

T#:41897500

Part#: FW-075-AL250TKT

Ships on Dec 14, 2026

$ 1,759.99 USD

Add to Wish List

Qty

$ 1,759.99 USD

Add to Wish List

Upgrade your BMW's drivability and clutch durability with the ClutchMasters Complete Clutch Kit w/ Aluminum Flywheel – FX250 Stage 2 from Turner Motorsport—a refined yet capable solution for the performance-minded daily driver

Show More Show Less

PPE Heavy Duty Aluminum ZF 8HP70 Transmission Pan - Black Finish - BM...

T#:1002350

Part#: 228053420

Back Ordered

$ 314.99 USD

Add to Wish List

Qty

$ 314.99 USD

Add to Wish List

When servicing your ZF transmission, BMW recommends replacing your entire transmission pan and filter as the pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions! That's not all! To top it all off, this pan also includes a high-powered Neodymium magnet built into the drain plug, preventing metal contaminants from being cycled through your transmission and causing damage. Replaces Genuine BMW part number: 24118612901 Need a replacement filter? See T#1002351 Features: Cast-aluminum construction Increased heat dissipation External cooling fins reduce oil temps 1.0 Quart increased fluid capacity Includes replaceable filter Neodymium magnet equipped billet stainless pulls harmful ferrous metal contaminants from the fluid 1/8” NPT temperature probe access port Limited lifetime warranty. GASKET NOT INCLUDED

Show More Show Less

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ...

T#:27238726

Part#: NCV27030

Ships in 2 Business Days

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

IRP Universal Short shifter V3 - Black Reverse Button

T#:401279

Part#: IRPSS-3B

Ships on Jan 11, 2027

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V3 from IRP, the successor of the V2.

Show More Show Less

Automatic Transmission Service Kit - 8HP Automatic Transmissions ...

10X Entries Into Our F80 M3 Sweepstakes

T#:554535

Part#: 8HPATSKT

In Stock

Sale - Save 4% $ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 370.10 USD

Add to Wish List

Qty

Sale - Save 4%

$ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 370.10 USD

Add to Wish List

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

Automatic transmission filter with associated hardware
Oil pan gasket
Drain plug with sealing washer
Fill plug with sealing washer
7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less

Automatic Transmission Service Kit - BMW 8HP F & G-Chassis - Redline ...

10X Entries Into Our F80 M3 Sweepstakes

T#:31191944

Part#: TMS8HPATSKT

In Stock

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: OEM Hengst Automatic transmission filter OEM Hengst Oil Pan Gasket & Installation Hardware OEM Hengst Drain plug with sealing washer OEM Hengst Fill plug with sealing washer 7 Liters of Reline D6 ATF NOTE: Depending on the model, an additional liter of fluid may be necessary if you are draining your oil cooler or removing the valve body. As per ZF's recommendations, Turner Motorsport suggests performing a full service on your 8HP automatic transmission every 50,000 miles. If your vehicle is modified and makes more power than stock or if your vehicle is regularly track-driven, we recommend shorter 30,000-mile service intervals. This will ensure your transmission's fluid is free from contamination which will help extend the life of internal transmission components like clutch packs and solenoids.

Show More Show Less

Turner Motorsport Shifter Rebuild & Upgrade Kit - F22/3 F3X (11/2014+...

10X Entries Into Our F80 M3 Sweepstakes

T#:555765

Part#: PBTSRKT54

In Stock

Sale - Save 23% $ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.85 USD

Add to Wish List

Qty

Sale - Save 23%

$ 418.20

This product was last offered at the strikethrough price on
05-03-2026

$ 322.85 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Turner Motorsport Shifter Rebuild & Upgrade Kit - F22/3 F3X (up to 11...

10X Entries Into Our F80 M3 Sweepstakes

T#:555744

Part#: PBTSRKT34

In Stock

Sale - Save 18% $ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD

Add to Wish List

Qty

Sale - Save 18%

$ 326.99

This product was last offered at the strikethrough price on
05-03-2026

$ 268.20 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Rear Differential Service Kit for various BMW Models

10X Entries Into Our F80 M3 Sweepstakes

T#:42133544

Part#: 835225790TKT

In Stock

Sale - Save 2% $ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD

Add to Wish List

Qty

Sale - Save 2%

$ 60.99

This product was last offered at the strikethrough price on
09-21-2026

$ 59.72 USD

Add to Wish List

The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

Turner Motorsport Shifter Rebuild Kit - F22/3 F3X (up to 11/2014) ...

10X Entries Into Our F80 M3 Sweepstakes

T#:555777

Part#: PBTSRKT66

In Stock

$ 148.99 USD

Add to Wish List

Qty

$ 148.99 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

PPE ZF 8HP70 Single Transmission Pan Filter - BMW 2010+

T#:1002351

Part#: 228058700

Back Ordered

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Replacement filter for your upgraded PPE transmission pan.

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only For vehicles with Manual Transmission and Production date of 03/2014+ or vehicles with ...

T#:27238727

Part#: NCV27031

Ships in 1 Business Day

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 & ...

For vehicles with a production date from 11/2014+ and a manual transmission

T#:48401514

Part#: RE.RCBM-F8X

Ships on Nov 11, 2026

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.

Show More Show Less

Turner Motorsport Shifter Rebuild Kit - F22/23 F3X (11/2014+) ...

10X Entries Into Our F80 M3 Sweepstakes

T#:555750

Part#: PBTSRKT39

Ships in 1-2 days

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3

10X Entries Into Our F80 M3 Sweepstakes

T#:41931290

Part#: SBB58A2STG3KT

Ships on Dec 14, 2026

$ 1,668.99 USD

Add to Wish List

Qty

$ 1,668.99 USD

Add to Wish List

The SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3 is the smart choice for BMW drivers demanding uncompromised performance and dependable power delivery for both street and sport applications.

Show More Show Less

Genuine BMW Engine And Transmission Mount Kit - M235i

10X Entries Into Our F80 M3 Sweepstakes

T#:556276

Part#: F22M235IDMKT

Ships in 1-2 days

$ 572.99

This product was last offered at the strikethrough price on
09-10-2026

$ 569.99 USD

Add to Wish List

Qty

$ 569.99 USD

Add to Wish List

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

Genuine BMW Engine Mount (Left & Right)
Genuine BMW Transmission Mount (x2)
New Installation Hardware

Show More Show Less

Front Wheel Bearing Assembly With Hardware - F-Chassis

10X Entries Into Our F80 M3 Sweepstakes

T#:42099843

Part#: 31206876844TKT

In Stock

Sale - Save 3% $ 226.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.87 USD

Add to Wish List

Qty

Sale - Save 3%

$ 226.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.87 USD

Add to Wish List

This kit includes updated M12x1.25 screws, required for installation along with brand new Hudson wheel bearings!

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 2

10X Entries Into Our F80 M3 Sweepstakes

T#:41931277

Part#: SB53A3STG2KT

Ships on Dec 14, 2026

$ 1,547.99 USD

Add to Wish List

Qty

$ 1,547.99 USD

Add to Wish List

The SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 2 delivers performance you can feel, making it the go-to solution for BMW enthusiasts looking to push their build without compromising drivability.

Show More Show Less

SPEC Clutch Kit With Billet Single Mass Flywheel - Stage 3+ ...

10X Entries Into Our F80 M3 Sweepstakes

T#:41931281

Part#: SB53A3STG3PKT

Ships on Dec 14, 2026

$ 1,735.99 USD

Add to Wish List

Qty

$ 1,735.99 USD

Add to Wish List

For BMW owners demanding consistent performance, faster throttle response, and long-lasting clutch life, the SPEC Clutch Kit With Billet Single Mass Flywheel – Stage 3+ delivers unmatched value and performance.

Show More Show Less

IRP V2 Short shifter - BMW 5 & 6 Speed

T#:401261

Part#: IRPSS-2B

Special Order: No Guaranteed ETA

$ 420.99 USD

Add to Wish List

Qty

$ 420.99 USD

Add to Wish List

The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V2 from IRP.

Show More Show Less

BMS Transmission Oil Cooler - BMW F-Chassis Gen 1 Oil Cooler ...

T#:14915970

Part#: FG1B58TOC

Back Ordered

7% off MSRP $ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Qty

7% off MSRP

$ 699.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 649.00 USD

Add to Wish List

Everyone knows that high heat is the enemy of your automatic transmission. And that higher power levels generate more transmission fluid heat which will cause a trans slip. Now you can extend the life of your automatic transmission by installing the new Burger Motorsports High Capacity B58 Gen1 Trans Cooler kit. This unique plug-and-play kit replaces your factory coolant to trans fluid heat exchanger with a high-capacity front-mounted air to trans fluid radiator. Includes all mounting hardware, lines, and coolant caps required for installation. Installs within the front bumper behind the driver-side kidney grills providing ample airflow over the large cooling core via existing openings. The result is dramatically reduced transmission temperature and extended transmission life. This kit is strongly suggested for any BMW B58 Gen1 F chassis automatic car running larger than factory turbos. 165ºF (74ºC) transmission oil cooler Improved Racing thermostat included The thermostat maintains the oil exiting the transmission at the rated minimum temperature in most conditions. Without a thermostat, the transmission fluid coolers are likely to over-cool the fluid, delaying transmission warm-up and performing the critical function of bypassing the cooler until the oil has reached its minimum operating temperature. FEATURES AND BENEFITS Dissipates excess transmission fluid heat Reduces transmission fluid temperature Increases transmission life when racing Increases transmission oil capacity included: (1) High capacity transmission oil cooler (2) Brackets (1) Billet adapter (2) Coolant plugs (1) Improved Racing 165F Thermostat + fittings (4)-10 AN crimped PTFE/SS/Nylon covered lines (6) M6x1.0x12mm bolts, washers and nuts (1) M6x1.0x20mm bolt Compatible with both RHD and LHD, RWD and AWD, ZF8HP50 and ZF8HP70 Transmissions.

Show More Show Less

Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Brushe...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241338

Part#: 24118612901T2KT

Back Ordered

$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!

Show More Show Less

Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Raw Fi...

10X Entries Into Our F80 M3 Sweepstakes

T#:1241337

Part#: 24118612901T1KT

Back Ordered

Sale - Save 4% $ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 440.15 USD

Add to Wish List

Qty

Sale - Save 4%

$ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 440.15 USD

Add to Wish List

Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!

Show More Show Less

Bremman Front Wheel Bearing Kit - With Hardware - F2x, F3x

10X Entries Into Our F80 M3 Sweepstakes

T#:56363348

Part#: 312068768401KT2

In Stock

$ 262.49 USD

Add to Wish List

Qty

$ 262.49 USD

Add to Wish List

The Bremmen Parts Front Wheel Hub Assembly Kit restores original chassis dynamics by completely refreshing your BMW’s front hub assemblies while maintaining value.

Universal Short Shifter V3 - Self Centering - Black Reverse Button Wi...

10X Entries Into Our F80 M3 Sweepstakes

T#:55317707

Part#: IRPUSSKT2

In Stock

$ 552.99 USD

Add to Wish List

Qty

$ 552.99 USD

Add to Wish List

Stop guessing where the gate is. Upgrade your connection to the machine and drive your BMW the way it was meant to be driven.

Front and Rear Differential Service Kit - F3x

10X Entries Into Our F80 M3 Sweepstakes

T#:56327200

Part#: F3XAWDFDKT6

In Stock

$ 202.99

This product was last offered at the strikethrough price on
10-07-2026

$ 202.27 USD

Add to Wish List

Qty

$ 202.27 USD

Add to Wish List

This kit combines Motul 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials

Driveshaft Overhaul Kit - F32 435i xDrive, F22 M235i xDrive

For vehicles with a production date up to 07/2015

10X Entries Into Our F80 M3 Sweepstakes

T#:54995059

Part#: TF32435XDOKT

In Stock

Sale - Save 5% $ 246.99

This product was last offered at the strikethrough price on
08-13-2026

$ 233.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 246.99

This product was last offered at the strikethrough price on
08-13-2026

$ 233.49 USD

Add to Wish List

The flex disc (aka universal joint or guibo/giubo) and center support bearing (CSB) often fail over time. A failing flex disc can cause clunks when shifting from park to reverse/drive, driveline slop, and excess vibrations when accelerating. A failing CSB will often cause a rhythmic vibration under the center console that increases in tempo as the car increases in speed, squealing or grinding noises from the bearing failure, and driveline vibration/shaking at higher speeds. When replacing either of these items, it is best to replace the associated components to ensure your driveshaft is properly supported and connected to the transmission output and differential input. This kit includes all of the basic items needed to complete this service in your BMW.

Show More Show Less

Short Shifter Rebuild & Upgrade Kit - F22/3 F3X (11/2014+)

10X Entries Into Our F80 M3 Sweepstakes

T#:590685

Part#: PBTSRKT54-1KT

In Stock

Sale - Save 18% $ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD

Add to Wish List

Qty

Sale - Save 18%

$ 264.01

This product was last offered at the strikethrough price on
05-03-2026

$ 216.91 USD

Add to Wish List

Schaeffler Front Wheel Bearing Kit - With Hardware - F2x, F3x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:56363349

Part#: 312068768401KT3

In Stock

$ 259.59 USD

Add to Wish List

Qty

$ 259.59 USD

Add to Wish List

This front wheel bearing kit features two genuine Schaeffler hub and bearing assemblies which is the precise OEM supplier trusted by BMW Motorsports. Built to handle aggressive cornering loads and high thermal stress

Show More Show Less

Mod-Twin 225 HD Sprung Street

T#:57543718

Part#: T1SS-B02

Ships in 6 Business Days

$ 2,136.00 USD

Add to Wish List

Qty

$ 2,136.00 USD

Add to Wish List

Engineered for high output applications, the Mod-Twin 225 HD Sprung Street Kit delivers increased torque capacity and precision driveline dampening.

AAE Remanufactured Transfer Case Assembly - BMW F22/23 F3X F07/10 F06...

For vehicles with a production date up to 07/2015

T#:42705795

Part#: GBA-59251KT

Ships in 3 Business Days

$ 2,563.99 USD

Add to Wish List

Qty

$ 2,563.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Mod-Twin 225 HD Sprung Race

T#:57543716

Part#: T1RS-B02

Ships in 6 Business Days

19% off MSRP $ 2,715.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,199.00 USD

Add to Wish List

Qty

19% off MSRP

$ 2,715.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,199.00 USD

Add to Wish List

Built to withstand violent launches and relentless track abuse, the T1RS-B02 Mod-Twin 225 HD Sprung Race Kit brings true competition durability to high output platforms.

SPEC Performance Clutch Kit With Billet Single Mass Flywheel - Stage ...

10X Entries Into Our F80 M3 Sweepstakes

T#:42099841

Part#: SBB58A2STG5KT

Ships on Dec 14, 2026

$ 1,868.99 USD

Add to Wish List

Qty

$ 1,868.99 USD

Add to Wish List

This Clutch kit is rebuildable, offering long-term reliability for BMW owners pushing their vehicles to the extreme. For drivers seeking uncompromised power transfer and race-ready performance, the Stage 5 clutch kit is the ultimate choice.

Show More Show Less

AAE Remanufactured Transfer Case Assembly w/ Electric Motor - BMW F22...

For vehicles with a production date up to 07/2015

T#:42705799

Part#: GBA-59251MKT

Ships in 3 Business Days

$ 3,519.99 USD

Add to Wish List

Qty

$ 3,519.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

AAE Remanufactured Transfer Case Assembly - BMW F22/23 F3X F10 ...

For vehicles with a production date from 07/2015+

T#:42705797

Part#: GBA-59260KT

Ships in 3 Business Days

$ 2,563.99 USD

Add to Wish List

Qty

$ 2,563.99 USD

Add to Wish List

These transfer cases are fully disassembled, cleaned, and remanufactured to meet or exceed OE specifications using OEM components. High-wear parts such as bearings, seals, gaskets, clutches, plastic components, and mounts are replaced, ensuring consistent and reliable performance.

Show More Show Less

Mod-Twin 225 XT Rigid Race

T#:57543719

Part#: T2R-B02

Ships in 6 Business Days

$ 2,141.00 USD

Add to Wish List

Qty

$ 2,141.00 USD

Add to Wish List

When high horsepower launches demand zero slop and maximum power transfer, the Mod-Twin 225 XT Rigid Race Kit is built to deliver. Engineered for severe track abuse and fast shifts

Project Cars

SELECT YOUR BMW

BMW Drivetrain Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results