BMW Engine Parts for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Vargas Turbo Technologies - Corporate Logo
T#:5122281
Part#: TRIPLECAPCLR1
Ships on Sep 21, 2026
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Mishimoto 19 Row Universal Oil Cooler
For custom applications only. Not a direct bolt on.
Mishimoto - Corporate Logo
T#:378414
Part#: MMOCUL
In Stock at Vendor
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
BMW Head Gasket Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15081522
Part#: 11128654272
Ships in 2 Business Days
$ 129.99

This product was last offered at the strikethrough price on
05-07-2026

$ 126.99 USD
Free Shipping on orders $49 and up
$ 126.99 USD
Free Shipping on orders $49 and up
This top engine kit includes most of the major seals and gaskets associated with cylinder head removal and replacement. Replacing worn gaskets and seals any time the components are removed is important to engine longevity. Leaks from using old seals can cause major engine damage. Don't take a chance, pick up this kit and keep your engine leak free.
Show More Show Less

Elring Crankshaft Seal - Front Position - 11118664905
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:29300820
Part#: 11118664905
Ships in 3 Business Days
$ 28.99

This product was last offered at the strikethrough price on
08-26-2026

$ 25.99 USD
Free Shipping on orders $49 and up
$ 25.99 USD
Free Shipping on orders $49 and up

Enhance the reliability and performance of your BMW engine with an Elring Crankshaft Seal, part number 11118664905.

Designed specifically for your BMW, this high-quality seal ensures a perfect fit and optimal functionality, helping to maintain the integrity of your engine. This seal replaces aging, cracked, or damaged seals that are known to cause oil leaks.

Features:

Easy Installation: Designed for straightforward installation, making it easier for you or your mechanic to replace. Enhanced Engine Protection: Helps protect your engine from contaminants and ensures smooth operation. Precision Fit: Engineered to meet the exact specifications of your BMW, ensuring a perfect and secure fit. Durable Material: Made from high-quality materials that resist wear and tear, providing long-lasting performance. Leak Prevention: Effectively seals the crankshaft to prevent oil leaks, maintaining optimal oil pressure and engine performance. Trust in Elring's commitment to quality and performance for all your automotive needs. Invest in this high-quality Crankshaft Seal to keep your engine running smoothly and efficiently.

Show More Show Less

Rein Timing Chain Rebuild Kit - CKP0250 SELECT PLUS
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:34214779
Part#: 11318648732KT5
Ships in 4 Business Days
Sale - Save 9% $ 1,205.99

This product was last offered at the strikethrough price on
04-28-2026

$ 1,098.31 USD
Sale - Save 9%
$ 1,205.99

This product was last offered at the strikethrough price on
04-28-2026

$ 1,098.31 USD

Rein Timing Chain Rebuild Kit - CKP0250 is a top-quality solution for BMW owners looking to maintain or restore the performance of their engine. Specifically designed for BMW models, this rebuild kit addresses common timing chain issues such as stretching and wear, which can lead to serious engine damage if not attended to. Available from Turner Motorsport, this kit provides all the necessary components for a complete timing chain replacement, ensuring your BMW continues to run smoothly and reliably.

The Rein Timing Chain Rebuild Kit - CKP0250 includes high-quality, durable parts that meet or exceed OEM standards. Whether you're a professional mechanic or a DIY enthusiast, this kit offers a comprehensive solution to ensure your engine’s long-term health and performance.

  • Specifically designed for BMW engines prone to timing chain issues
  • Complete rebuild kit includes timing chain, tensioner, and guides
  • Prevents costly engine damage due to worn or stretched timing chains
  • Made from high-quality materials for long-lasting durability
  • Meets or exceeds OEM specifications for reliable fitment and performance
  • Ideal for BMW maintenance, repairs, or engine rebuild projects

For BMW owners looking for a reliable, all-in-one solution, the Rein Timing Chain Rebuild Kit - CKP0250 from Turner Motorsport ensures your engine stays in optimal condition.

Show More Show Less
Engine Mount - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:637571
Part#: 22116855456
Ships in 2 Business Days
$ 51.99 USD
Free Shipping on orders $49 and up

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG
For vehicles with production date up to 07/2013
PWG models only
Pure Turbos - Corporate Logo
T#:13957911
Part#: N55PURE750PWG
Ships in 5 Business Days
$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD
Free Shipping on orders $49 and up
$ 3,107.00 USD
Free Shipping on orders $49 and up
These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!
Show More Show Less
Conti Tech Rubber High-Pressure Hose
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:378830
Part#: N0202811
Ships in 4 Business Days
$ 34.22 USD
Free Shipping on orders $49 and up
7mm O.D X 2.5mm I.D.

Revshift - Corporate Logo
T#:13957873
Part#: PMM-F3XXI-95A
Ships on Sep 25, 2026
$ 399.99 USD
Free Shipping on orders $49 and up
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 2 Business Days
New Item
$ 29.00 USD
Free Shipping on orders $49 and up
Lisle - Corporate Logo
T#:5498460
Part#: 75500
Ships in 2 Business Days
$ 48.26 USD
Free Shipping on orders $49 and up
Quickly pinpoint or check for combustion leaks.
Revshift - Corporate Logo
T#:13957870
Part#: PMM-F3X-80A
Ships in 6 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less


TechSelect Turbocharger Hose Kit
For vehicles with production date from 2014-2016
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:14023868
Part#: TRK0011
Special Order: No Guaranteed ETA
Sale - Save 17% $ 349.99

This product was last offered at the strikethrough price on
08-13-2026

$ 290.69 USD
Free Shipping on orders $49 and up
Sale - Save 17%
$ 349.99

This product was last offered at the strikethrough price on
08-13-2026

$ 290.69 USD
Free Shipping on orders $49 and up
TechSelect Turbo Kits include all hoses, hardware and gaskets needed TechSelect Turbo Kit hoses are direct replacements to the OE, and include brackets, hardware and sealing components This hardware is designed and manufactured to withstand the rigorous operating environments of turbocharger systems Gaskets included are direct replacements to the OE ensuring optimal performance
Show More Show Less
Rubber Engine Mount - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:641884
Part#: 22116855460
Ships in 2 Business Days
$ 43.99 USD
Free Shipping on orders $49 and up
Corteco - Corporate Logo
T#:556274
Part#: 22116787659
Ships in 2 Business Days
$ 180.18

This product was last offered at the strikethrough price on
08-08-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
Replace your worn engine mounts

Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

Motiv Motorsports - Corporate Logo
T#:29234303
Part#: 900.1012
Ships in 5 Business Days
$ 140.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!
VRSF - Corporate Logo
T#:5844256
Part#: 10301060
Ships in 3 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
These high flow intake inlets are constructed from high quality, tig welded brushed aluminum. This upgraded inlets is the most cost effective solutions for anyone looking to replace their restrictive factory inlet. Unlike other available upgrades, the VRSF features a CNC’d aluminum flange that offers a larger overall inside diameter which not only increases flow but decreases back pressure. Our high flow inlet kit includes everything necessary to replace the restrictive stock intake inlet with our high flowing 2.5″ aluminum inlet. This kit will work with any and all available intakes as well as any upgraded turbo that is compatible with the OEM intake. This kit works with both RHD and LHD models as well as XI their variants.
Show More Show Less

VTT F Series B58 Engine Catch Can - F Chassis B58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:640192
Part#: VTTB58CATCH2
Ships on Sep 21, 2026
$ 356.99 USD
Free Shipping
$ 356.99 USD
Free Shipping
This kit uses VTTs popular modular catch can and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Retains OEM fit and finished when installed. This kit stands out from others on the market by using high-quality AN fittings and VTT Banjo adapters. Kit contents: One Catch Can One CNC 6061 bracket Two -10 Low Profile CNC Banjo Fittings Two -10 VTT 5-Ply silicone Vacuum hoses Two -10 Push Lock Fittings Two spring clamps Fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine. Fits all 2015+ F series BMW vehicles with the B58 engine
Show More Show Less
CTS - Corporate Logo
T#:5802147
Part#: CTS-F20-F30-RACE
Ships in 8 Business Days
Sale - Save 25% $ 599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 449.99 USD
Free Shipping
Sale - Save 25%
$ 599.99

This product was last offered at the strikethrough price on
08-26-2026

$ 449.99 USD
Free Shipping
CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+
Show More Show Less

AFE - Corporate Logo
T#:557623
Part#: 44-LF029-MB
Ships in 4 Business Days
Sale - Save 5% $ 54.00

This product was last offered at the strikethrough price on
09-01-2026

$ 51.30 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 54.00

This product was last offered at the strikethrough price on
09-01-2026

$ 51.30 USD
Free Shipping on orders $49 and up

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Show More Show Less

SnowPerformance - Corporate Logo
T#:589559
Part#: SNO-40200
Ships in 3 Business Days
$ 74.99 USD
Free Shipping on orders $49 and up
Installs easily for an accurate boost reading every time.
5150 Autosport - Corporate Logo
T#:25241790
Part#: B58-S-203-4705
Ships in 4 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
This ARP2000 Head Stud Kit 203-4705 is designed for the turbocharged inline 6-cylinder B58 engines found in various BMW chassis and the Toyota GR Supra A90/A91. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. ARP Head Studs are stronger than factory bolts, ensuring your race engine stays together even under extreme conditions.
Show More Show Less
Rein Oil Pan Kit
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:17738376
Part#: 11137618512
Ships in 4 Business Days
Sale - Save 5% $ 181.99

This product was last offered at the strikethrough price on
08-31-2026

$ 172.89 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 181.99

This product was last offered at the strikethrough price on
08-31-2026

$ 172.89 USD
Free Shipping on orders $49 and up
This OE quality kit includes the engine oil pan and gasket.


Nostrum - Corporate Logo
T#:9609825
Part#: H703-1257
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:3872390
Part#: VTTB58GC/GC+TURB
Ships on Sep 21, 2026
$ 2,094.99 USD
Free Shipping
$ 2,094.99 USD
Free Shipping

Elevate your BMW B58 engine to new heights with the VTT B58 "GC" Turbocharger Upgrade. Say goodbye to core charges, long lead times, and restrictive factory housings. VTT's 100% new casting B58 GC and GC+ turbocharger upgrades retain the factory B58 turbo's great design elements while addressing shortcomings like the small inlet area and bearing housing. The result is a turbocharger upgrade supporting over 600WHP, maintaining factory spool, and utilizing all factory connections. Experience serious B58 power effortlessly with the VTT GC Turbo Upgrade.

  • 100% new casting for OE quality
  • Supports over 600WHP
  • Retains factory spool and connections
  • Improved design elements for enhanced performance
  • Easy drop-in B58 turbocharger upgrade
  • Includes 4' Aluminum Connector & Install Kit
Show More Show Less
NGK - Ignition Coil - N20 N52 N54 N55 S55 S54 N62 S62 M54
We Price Match - Give Us A Call or Chat!
NGK - Corporate Logo
T#:35289800
Part#: 12138616153
Ships in 2 Business Days
$ 59.99

This product was last offered at the strikethrough price on
05-07-2026

$ 58.99 USD
Free Shipping on orders $49 and up
$ 58.99 USD
Free Shipping on orders $49 and up

Vargas Turbo Technologies - Corporate Logo
T#:390086
Part#: N55-STG1-PWG-NEW
Ships on Sep 21, 2026
$ 1,258.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,254.00 USD
Free Shipping
$ 1,254.00 USD
Free Shipping

Ignition Projects - Corporate Logo
T#:1637692
Part#: IP-A122409
Ships in 6 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Sep 22, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
Ships in 1 Business Day
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Eventuri - Corporate Logo
T#:1871616
Part#: EVE-B58F-CF-ENG
Ships in 6 Business Days
$ 745.00 USD
$ 745.00 USD

Vargas Ignition Coil Kit (Red) - B58/B48/S58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309604
Part#: VTT-COIL-B58-RED
Ships in 6 Business Days
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Pure Turbos - Corporate Logo
T#:56291038
Part#: B58G1P600HF
Ships in 5 Business Days
New Item
$ 1,295.00 USD
Free Shipping on orders $49 and up
$ 1,295.00 USD
Free Shipping on orders $49 and up
Pure Turbo's PURE600 turbo kit is designed to support 550+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW on the street and for occasional track outings.
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29234311
Part#: 900.1013
Ships in 5 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!
Burger Motorsports - Corporate Logo
T#:5567061
Part#: OCCN55-235COUPE
Ships in 2 Business Days
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less


Bosch - Corporate Logo
T#:580223
Part#: AL9449X
Ships in 2 Business Days
$ 575.99 USD
Free Shipping
$ 575.99 USD
Free Shipping
5150 Autosport - Corporate Logo
T#:25241785
Part#: SP-CRS-B58
Ships in 4 Business Days
$ 1,099.99 USD
Free Shipping on orders $49 and up
SP Components is renowned for their premium aftermarket forged H-beam rods, earning a strong reputation in the industry. These connecting rods, characterized by their lightweight and robust nature, boast an enlarged mating surface that significantly enhances their ability to withstand heavy loads. Specifically engineered to replace BMW part #11248623419 and #11247589671, these rods are tailored for BMW B58 engines featuring a 148mm connecting rod length. In addition to their reliable construction, these rods come equipped with balanced matching weights and include ARP rod bolts. With a robust capacity to endure speeds of up to 8,500 rpm, they are exceptionally well-suited for high-performance applications. Furthermore, these rods demonstrate the capability to meet the demands of high-horsepower forced induction engines generating up to 900HP, providing the added assurance of ARP Connecting Rod Bolts Included.
Show More Show Less
5150 Autosport - Corporate Logo
T#:23416508
Part#: FER-HPVK-S55-T-3
Ships in 4 Business Days
$ 929.99 USD
Free Shipping on orders $49 and up
Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!
Show More Show Less

Baum Tools - Corporate Logo
T#:641886
Part#: B130190KIT
Ships in 6 Business Days
$ 219.99 USD
Free Shipping
$ 219.99 USD
Free Shipping
Includes 130190, 130191 and 130280

POR-15 - Corporate Logo
T#:1575841
Part#: POR49216
Ships in 7 Business Days
$ 40.99 USD
Free Shipping on orders $49 and up
POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.
Show More Show Less
OEM Continental Accessory Belt - 11288646475
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:30430716
Part#: 6PK1165
Ships in 3 Business Days
$ 27.99

This product was last offered at the strikethrough price on
05-07-2026

$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up

Accessory drive belts are essential for keeping your engine's components running smoothly off the crank pulley. These belts power the generator, fans, water pumps, and AC compressors, ensuring everything functions properly. If your drive belt shows signs of aging, such as cracking, glazing, or squeaking, it's time for a replacement.

Signs of wear are easy to spot. The underside of the belt will start to glaze, reducing its effectiveness. Cracks can develop on the back due to "dry rot" from exposure to engine heat or age. Squealing noises indicate the belt is slipping on the pulleys. In any of these cases, it's clear your vehicle needs a new belt.

Our drive belt is designed for long-lasting performance, keeping your accessories running efficiently. A worn belt can cause your accessories to work below their optimal capacity. Don't wait for a belt failure—include it in your next maintenance plan to ensure your vehicle remains in top condition.

Show More Show Less

URO Premium - Corporate Logo
T#:32781447
Part#: 11137618512PRMK
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up
When removing your oil pan, it is always a good idea to replace the gasket to ensure you don't experience leaks when the pan is re-installed. This gasket is designed specifically for the URO Premium Aluminum Oil Pan Improved profile and upgraded AEM material to eliminate leaks. Only works on URO Premium Oil Pan Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Replaces hardened or cracking engine oil pan gaskets that allow vacuum leakage and degrade engine performance OE-style seal profile and durometer ensures proper compression seal between the engine block and oil pan High-quality seal material resists engine heat and oil degradation 24-Month Unlimited Mileage Warranty
Show More Show Less
5150 Autosport - Corporate Logo
T#:26238415
Part#: 5150-HPMBS-N55
Ships in 4 Business Days
$ 549.99 USD
Free Shipping on orders $49 and up
5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less

Arc Terminator - Corporate Logo
T#:26471614
Part#: AT232F22BLA40MB5
Ships in 2 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships on Sep 21, 2026
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
N55 Stage 1 Turbo Upgrade
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Ships in 10 Business Days
$ 1,545.99

This product was last offered at the strikethrough price on
06-15-2026

Starting at $ 1,541.54 USD
Free Shipping
Starting at $ 1,541.54 USD
Free Shipping

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.

Show More Show Less
Race German - Corporate Logo
T#:7703242
Part#: RGIFPA
Ships in 2 Business Days
$ 23.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Finding a way to measure your fuel pressure is not always the easiest thing to do. Race German wanted to make your life just a little easier with this in-line fuel pressure adapter. This simple solution allows you to splice into your rubber fuel feed line hose and attach a 1/8NPT pressure sender. This would be great to run a fuel pressure gauge, or give you a way to temporarily test your pressure for troubleshooting issues, either way you can't go wrong. *Does not include pressure sender.
Show More Show Less


Valve Cover Gasket Set
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:638478
Part#: 11127588418
Ships in 2 Business Days
$ 25.99 USD
Free Shipping on orders $49 and up
URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Revshift - Corporate Logo
T#:22163403
Part#: PMM-F3X-95A
Ships in 5 Business Days
$ 399.00 USD
Free Shipping on orders $49 and up
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less