BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 2 Series F22 (2014+)

Upgrade your exhaust system with the Downpipe To Cat-Back Reducer.

Engineered for optimal performance and durability, this reducer allows for seamless connection between your downpipe and cat-back exhaust system. Its high-quality construction ensures a tight seal, reducing exhaust leaks and enhancing overall exhaust flow. With easy installation and compatibility with various exhaust systems, this reducer is a must-have for any performance enthusiast.

• Allows for seamless connection between downpipe and cat-back exhaust
• High-quality construction for durability
• Tight seal reduces exhaust leaks
• Enhances overall exhaust flow
• Easy installation and compatibility with various exhaust systems

BMW F Chassis Oxygen Sensor - Upstream Catalytic Converter is a critical component for monitoring exhaust emissions and optimizing engine performance. Positioned at the front of the exhaust manifold, this sensor, also known as a Lambda probe, provides essential data to your vehicle's computer, ensuring efficient operation and reduced emissions.

• Precise Emissions Monitoring: Accurately measures exhaust gases to ensure optimal engine performance and compliance with emissions standards.
• Enhanced Engine Efficiency: Relays vital information to the vehicle's computer to adjust fuel mixtures and improve overall efficiency.
• Improved Fuel Economy: Helps in maintaining the correct air-fuel ratio, contributing to better fuel consumption.
• Durable Construction: Built to withstand high temperatures and harsh conditions for long-lasting reliability.
• Direct Replacement: Designed to fit seamlessly into the upstream catalytic converter position of BMW F chassis models.

Ensure your BMW F chassis operates at peak performance with the Upstream Catalytic Converter Oxygen Sensor, designed for precise emissions control and engine efficiency.

This N20 downpipe feature larger piping and catalytic converter that are freer-flowing than the original cats for better flow and less backpressure. By removing exhaust restrictions the turbos can spool up faster which makes more boost sooner. With additional tuning, more power is available. There are downpipes that delete the primary cats and can leave the exhaust with a dirty and awful smell. These Wagner downpipes are built with a sport cat to keep the exhaust cleaner.Special software, or stand-alone engine management, may be required to keep emissions fault codes and check engine lights from appearing.

Features:

• 200cpi Catalytic Converter
• 100% perfect fit - CAD designed.
• less thermal load on the turbocharger
• more power by reducing back pressure
• significantly more torque
• Made from 1.4301 (SS304) Stainless Steel
  
   

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

This item fits the following BMWs:
2014+ F22 BMW 228i
10/2012+ F30 BMW 328i 328i xDrive 328xi - Sedan (with N20 engine; not for N26 SULEV engine)
2014+ F32 BMW 428i 428i xDrive 428xi - Coupe (with N20 engine; not for N26 SULEV engine)
Left Hand Drive ONLY

• Stainless steel construction
• Multi-chamber design for increased performance
• Chambered muffler performance sound

Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.

Key Benefits:

• 100% stainless steel construction for robustness
• Lap-joint welding ensures solid build quality
• Free-flowing, straight-through design for enhanced performance
• Stainless mesh wrap and acoustical fiber fill deliver a smooth, deep tone
• Packed tightly for long-lasting performance without sound degradation

Features:

• 2.5'' Inlet and Outlet
• 14'' body length
• 20'' overall length
• May require welding/fabricating for fitting; not a direct fit for any specific car model

Free ground shipping! 

One of the complaints about turbocharged engines is that they are too quiet. Even on a high-performance model like the M-tuned 235i there is only so much the factory will do to make a sport exhaust. If you're looking for a little more pop and snarl from your exhaust, the Supersprint straight pipe and performance muffler will be a good choice. This pipe deletes the resonator ahead of the rear muffler and must be used with the Supersprint muffler.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:section 2

connects to:stock or Supersprint 1; Supersprint muffler

material:304 stainless steel

This item fits the following BMWs:
2014+ F22 BMW M235i

The system is built to exacting specifications to ensure perfect fit using the factory hangers. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 89mm ceramic black exhaust tips for a tasteful, high-performance look.

Maximum performance gains are 6 horsepower and 5 ft-lbs of torque.

The exhaust adds 3 point towards a Dinan badge.

Benefits of the Dinan Free Flow Exhaust:

+ Includes mounting hardware
+ Helmholtz chamber to reduce drone
+ Enjoyably louder, sportier Sound
+ 100% 304 stainless steel construction
+ Twin 89mm laser engraved ceramic black exhaust tips
+ 6 HP @ 6600 RPM, 5 FT-LB

*For vehicles WITHOUT the M-Performance rear valance*

Free ground shipping! 

This front section is a direct replacement for the stock 235i/335/435/M2 exhaust with one key difference - the Supersprint uses full 80mm piping for improved flow out of the turbo. One of the best and easiest ways of getting more power from a stock turbo is by helping it push exhaust gas and larger and smoother exhaust piping will help with that. Where the stock system is bent and crimped, the Supersprint is a full 80mm along its entire length. This section 1 will fit to the stock or Supersprint turbo downpipe and a stock or Supersprint section 2 exhaust.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

This item fits the following BMWs:
2014+ F22 BMW M235i
2012+ F30 BMW 335i - Sedan
2013+ F32 BMW 435i - Coupe
2013+ F33 BMW 435i Convertible
2014+ F36 BMW 435i Gran Coupe
2016+ F87 BMW M2

For over 30 years, Active Autowerke has been the one to turn to for high-quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. 

The B46 downpipes are strategically engineered to virtually eliminate the immensely restrictive characteristics of the factory downpipes – therefore reducing radiant heat and increasing performance.

Features Include

NO CEL when using this downpipe

GESI EPA registered high flow and fully OBD2 compliant

Casted upper stainless steel V-Band for precise fitment

3 inch diameter piping allows for maximum power output

Quicker turbo spool

Rated for 500 to 850 hp applications

Withstands up to 1500° F

Can reach operational efficiency within 9 seconds of startup

Easily bolts-on – no cutting or welding required

Durable construction from TIG welded 304 stainless steel

Ultra high flow 400 cell per square inch catalyst

EPA certified for use on OBD2 vehicles (1996 and newer) except in California

304 stainless steel substrate in catalytic converter is furnace braised to the mantle for outstanding durability

GESi® proprietary precious metal loading technology ensures greatly reduced emissions

Both passengers and drivers are safe from harmful emissions and noise

Precise fitment

Made in Miami, Florida

Covered by 5 Year / 50,000 Mile Warranty (on shell and tube ends)

FITMENT NOTE: For G-Chassis models (G20, G22), the cutoff build date of 08/2020 is important as cars produced after that date have a downpipe with different bracket locations. Cars with a build date of 08/2020 and earlier have the brackets in a V configuration. Cars with a build date of 09/2020 and later have the brackets in a straight line and require Active Autowerke p/n 11-065G

Dinan engineers designed the F22 M240i exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Not only is the tone improved but the additional burbles and pops that come with it are simply intoxicating. Dinan also incorporates a Helmholtz chamber design that reduces resonance or “drone” at low RPM.

The system is built to exacting specifications to ensure perfect fit using the factory hangers. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 89mm (3.5") polished exhaust tips for a tasteful, high-performance look.

Maximum performance gains are 6 horsepower and 5 ft-lbs of torque.

Benefits of the Dinan Free Flow Exhaust for the F22 M240i:

+ Uses the factory brackets and hangers for a factory-like fitment.
+ Helmholtz chamber to reduce drone.
+ Enjoyably louder, sportier Sound
+ 100% 304 stainless steel construction
+ Twin 89mm (3.5") laser engraved ceramic black exhaust tips
+ 6 HP @ 6600 RPM, 5 FT-LB
+ Factory computer controlled exhaust valve is eliminated

The Active Autowerke BMW F22 228i signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F22 228i performance signature exhaust.

This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers).

This BMW F22/F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains!

This muffler turns your 228i exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears.

The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 228i performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning.

On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 228i test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade.

Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system.

FEATURES:

• Larger diameter mandrel bent piping for maximum flow
• Durable, polished 100% 304 stainless steel
• Double-walled 80 mm signature stainless tips
• Adjustable tips with embossed Active Autowerke logo on the dual tip model
• Improved power & torque throughout entire RPM band
• Actual dyno measure results with gains of 10 + WHP over stock configuration
• Weighs 19 lbs. vs. the factory of 29 lbs.
• Fitment for coupe, convertible and sedans
• Complete illustrated instruction manual
• Two year limited warranty included

NOTE:

• Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting measurements are included in the instructions.

Fits F22/30 BMW 228i and 228i models with the N20 engine.

Free ground shipping! 

Supersprint has developed this rear muffler for the M235i that fits in place of the stock muffler and gives a more sporty and aggressive exhaust note (when combined with the Supersprint section 2 pipes). Supersprint builds their exhausts from the muffler-forward and tunes each section along the way. They're not just adjusting sound levels and tone but also backpressure and flow. The goal is to achieve power and torque gains in concert with a pleasing sound. This M235i muffler uses 4 80mm exhaust tips to give the back end a more Motorsport theme (like an M3/M4). The stock bumper and valence will require trimming to clear.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

Dynos:

Stock vs. Supersprint:
section 2 straight pipe
muffler
Stock vs. Supersprint:
turbo downpipe with sport cat
section 1, section 2 straight pipes
muffler

Video:

M235i Supersprint Exhaust:
Supersprint turbo downpipe with cat
Supersprint section 1
Supersprint section 2 straight pipe
Supersprint muffler

section:rear muffler

connects to:Supersprint section 2

tip design:4x80mm round

material:304 stainless steel

This item fits the following BMWs:
2014+ F22 BMW M235i

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - from 08/2013

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - From 08/2013

BMW B58 3.0L Oxygen Sensor - Downstream is essential for maintaining optimal engine performance and fuel efficiency. Turner Motorsport offers this high-quality replacement sensor designed to precisely measure exhaust oxygen levels, allowing the vehicle's computer to accurately adjust the air/fuel ratio and monitor emissions. A degraded oxygen sensor can lead to decreased engine performance, reduced fuel efficiency, and increased harmful emissions, potentially triggering the Check Engine Light and causing a failure in emissions testing.

• Ensures Optimal Engine Performance: Accurately measures exhaust oxygen levels for precise air/fuel ratio adjustments.
• Improves Fuel Efficiency: Helps maintain proper fuel mixture, reducing fuel consumption.
• Reduces Harmful Emissions: Keeps emissions in check, ensuring compliance with environmental standards.
• Prevents Check Engine Light Activation: Helps avoid unnecessary warning lights and potential emissions test failures.
• Quality Replacement: High-grade sensor designed specifically for the BMW B58 3.0L engine.