BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW 2 Series F22 (2014+)

The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013

NOW LOCATED UNDER T#338024

This item fits the following BMWs:
2014+ F22 BMW M235i

Dinan engineers designed the F22 M240i exhaust to improve exhaust flow by reducing back pressure, resulting in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. Not only is the tone improved but the additional burbles and pops that come with it are simply intoxicating. Dinan also incorporates a Helmholtz chamber design that reduces resonance or “drone” at low RPM.

The system is built to exacting specifications to ensure perfect fit using the factory hangers. It is made from 100% 16 gauge 304 stainless steel and will resist corrosion for years to come. The design features twin 89mm (3.5") polished exhaust tips for a tasteful, high-performance look.

Maximum performance gains are 6 horsepower and 5 ft-lbs of torque.

Benefits of the Dinan Free Flow Exhaust for the F22 M240i:

+ Uses the factory brackets and hangers for a factory-like fitment.
+ Helmholtz chamber to reduce drone.
+ Enjoyably louder, sportier Sound
+ 100% 304 stainless steel construction
+ Twin 89mm (3.5") laser engraved polished exhaust tips
+ 6 HP @ 6600 RPM, 5 FT-LB
+ Factory computer controlled exhaust valve is eliminated

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.

Secures the exhaust manifold to the head. Used on all BMW N-series motors that are turbo-charged.

Genuine BMW Flange Nut
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N54,N54T,N55
 

This exhaust gasket is used to seal the turbo to downpipe connections.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N54,N54T,N55,N63,N63N,S55,S63 and S63N engines

This exhaust gasket is used to seal the exhaust midpipes to the downpipes. We also recommend replacing the bolts (11621711954, 4 required) as well.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
N54 3.0L

BMW F22 F23 Dinan High Flow Mid-pipe is designed to significantly enhance the exhaust tone and performance of your BMW. This premium mid-pipe replaces the factory center section, including both resonators, with straight-through 3.25" T304 stainless steel tubing. The result is improved exhaust flow, a more aggressive sound, and a weight reduction of 3 pounds. When paired with the Dinan exhaust, the sound is perfected into an unmistakable growl, making your BMW F22 or F23 stand out on the road.

• Enhanced exhaust tone: Delivers an aggressive, sporty sound that turns heads.
• Improved exhaust flow: Increases performance by replacing restrictive factory components with 3.25" T304 stainless steel tubing.
• Weight reduction: Reduces overall vehicle weight by 3 pounds for better performance.
• High-quality construction: Crafted from durable T304 stainless steel for long-lasting performance and corrosion resistance.
• Perfect pairing: Complements the Dinan exhaust system, amplifying the sound and performance benefits.
• Designed for BMW F22 and F23: Ensures a perfect fit and easy installation.

Upgrade your BMW with the Dinan High Flow Mid-pipe, available through Turner Motorsport, to experience a new level of performance and sound.

Free ground shipping!

This tuned resonator section replaces the factory resonator and works with the Supersprint muffler for a new, more aggressive, but still tame, exhaust note. The resonator is tuned along with the rest of the exhaust to give a more sporty sound than the factory M235i resonator but still meet European noise regulations. If you want more sound after this, there is a resonator-delete pipe available as well.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

section:section 2 resonator

connects to:stock or Supersprint section 1; Supersprint muffler

material:304 stainless steel

This item fits the following BMWs:
2014+ F22 BMW M235i

Dual clamp pipe connector joins exhaust pipes without welding. Split, compressible design clamps tightly around joined pipes for a leak-free fit. Includes hardware.

76.2mm (3.00 inch) diameter.