Mishimoto Performance Air Intake - Wrinkle Nlack - F2X F3X N20 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CARB certified for sale in all 50 states

T#:384811

Part#: MMAIF3012WBK

EO#: D-759-1

In Stock at Vendor

$ 503.99 USD

Add to Wish List

Qty

$ 503.99 USD

Add to Wish List

Mishimoto is well-known as a producer of high-performance cooling system components. Utilizing the same quality and attention to detail, they have produced a performance air intake system for your BMW. Under load, the intake produces a louder, more aggressive tone, without affecting air/fuel ratios - it still works great with the stock tune! This intake features an enclosed airbox to scavenge cold air and protect from underhood heat, while a high-flow air filter replaces the stock paper filter element. A complete bolt-in upgrade that can be completed in an afternoon with immediate results. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Performance Air Intake - Polished - F2X F3X N20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:384810

Part#: MMAIF3012P

EO#: D-759-1

In Stock at Vendor

$ 503.99 USD

Add to Wish List

Qty

$ 503.99 USD

Add to Wish List

Mishimoto is well-known as a producer of high-performance cooling system components. Utilizing the same quality and attention to detail, they have produced a performance air intake system for your BMW. Under load, the intake produces a louder, more aggressive tone, without affecting air/fuel ratios - it still works great with the stock tune! This intake features an enclosed airbox to scavenge cold air and protect from underhood heat, while a high-flow air filter replaces the stock paper filter element. A complete bolt-in upgrade that can be completed in an afternoon with immediate results. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588087

Part#: MMINT-F30-12BK

Ships in 2 Business Days

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty. Features & Specifications: Direct fit for the 2012-2016 BMW F22/F30 Chassis Patent Pending 6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers Max power gains of 10 whp and 8 wtq on stock tuning Drops intercooler outlet temperature by 45°F on stock tuning Optimal core design for maximum cooling efficiency with minimal pressure drop Intercooler core volume increased by 96% External fin surface area increased by 130% Header plate includes shroud specifically designed to seal against curved factory crash beam Retains factory quick-disconnect fittings for compatibility with stock piping Available in silver or black Mishimoto Lifetime Warranty INSTALLATION INSTRUCTIONS WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25241773

Part#: MMCP-3035B

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Mishimoto High Performance Intercooler - Silver - F22/23 F3X F87 N20 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588088

Part#: MMINT-F30-12SL

Ships in 3 Business Days

$ 887.99 USD

Add to Wish List

Qty

$ 887.99 USD

Add to Wish List

Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune. Mishimoto is here to unlock the full potential of your N20/26 and N55 engines withtheir Performance Intercooler specifically designed for the F22/F30 chassis. Their unique 6” thick step-core design adds a 115° angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as Mishimoto engineered their intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop. Coupled together, their features were able to drop intercooler outlet temperatures by 45°F, and add 10 whp and 8 wtq all on the stock tune of a 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty. Features & Specifications: Direct fit for the 2012-2016 BMW F22/F30 Chassis Patent Pending 6” thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers Max power gains of 10 whp and 8 wtq on stock tuning Drops intercooler outlet temperature by 45°F on stock tuning Optimal core design for maximum cooling efficiency with minimal pressure drop Intercooler core volume increased by 96% External fin surface area increased by 130% Header plate includes shroud specifically designed to seal against curved factory crash beam Retains factory quick-disconnect fittings for compatibility with stock piping Available in silver or black Mishimoto Lifetime Warranty INSTALLATION INSTRUCTIONS WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369781

Part#: 30-3000

Ships in 9 Business Days

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590418

Part#: 30-3304

In Stock at Vendor

11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Qty

11% off MSRP

$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD

Add to Wish List

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

Enhances performance and efficiency for BMW and MINI vehicles
Maximizes power output while ensuring engine safety
Internal MAP sensor for precise control
35PSI maximum pressure capacity for reliability
Improves horsepower, torque, and fuel economy

Show More Show Less

AEM Water/Methanol Injection System

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815164

Part#: 30-3326

In Stock

11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

Qty

11% off MSRP

$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD

Add to Wish List

AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Mishimoto Performance Air Intake - Wrinkle Nlack - F2X F3X N20 ...

Mishimoto Performance Air Intake - Polished - F2X F3X N20

Mishimoto High Performance Intercooler - Black - F22/23 F3X F87 N20 N...

Mishimoto Silicone Transition Coupler - 3in. To 3.5in. - Black ...

Mishimoto High Performance Intercooler - Silver - F22/23 F3X F87 N20 ...

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

AEM V3 Water/Methanol Injector Kit (Qty 2)

V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max ...

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

AEM Water/Methanol Injection System

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results