BMW Intake Parts for BMW 2 Series F22 (2014+)

Replacement N55 Performance Filter, No Hardware

T#:3586313

Part#: REPLACEMENT-N55F

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

Designed for N55 engines
Optimizes airflow for increased power
Improves throttle response and fuel efficiency
Protects engine from contaminants

Show More Show Less

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

Burger Motorsports Performance Intake - Blue Filter - F22 F87 2 Serie...

Not for sale or use in the state of California. For vehicles equipped with an automatic transmission only.

T#:556781

Part#: BMS-F3X-N55-INT

In Stock

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

Adds up to 10+ Horsepower
Dramatic sound improvement
Super fast install and removal
Improves throttle response
Retains OEM airbox base as a heat shield
Retains OEM cold air ducting
Looks great under the hood
Cleanable and reusable filter
Made in the USA

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Burger Motorsports Aluminum Charge Pipe Upgrade with TurboSmart BOV &...

For Gen1 B58 only

T#:27171969

Part#: B58-ACP-TSBOV

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel ...

T#:21933055

Part#: N54PIIMINJECT

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

BMC Performance Air Filter - 230i, 320i/i xDrive, 330e/i/i xDrive, 34...

T#:398738

Part#: FB928/20

In Stock at Vendor

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Universal 10AN ORB To 3/8" Barb

T#:31522993

Part#: RAD20-0530

In Stock

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

T#:51848519

Part#: G12B48CP

Ships on Nov 10, 2026

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.

Show More Show Less

Burger Motorsports Performance Intake - Blue Filter - BMW F-Chassis 2...

Not for sale or use in the state of California.

T#:556808

Part#: BMS-B48-INT-B

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMS Silicone Intake Pipe Hose Upgrade - F Chassis B58

T#:38688920

Part#: B58FINLET

Ships on Nov 10, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports B58 BMW Silicone Intake Pipe Upgrade optimizes airflow by removing the upper factory sound resonator and lower accordion section of the stock inlet pipe, ensuring a smoother transition from the intake to the turbo. Compatible with both the OEM BMW B58 intake and the Burger Motorsports F-Chassis B58 intake for enhanced performance.

Show More Show Less

Burger Motorsport Performance Intercooler - N20 N55 - Stepped Core ...

T#:556817

Part#: BMS-F-N55N20INTC

In Stock

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

Looking to upgrade your intercooler? This Burger Motorsport intercooler is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N20/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler. BMS replacement intercoolers are a direct replacement for your factory intercooler and are fully reversible. All required hardware is included. Dimensions: 21" x 6" first step x 2.5" 2nd step x 5" *Not for sale or use in the state of California.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

T#:51883658

Part#: G1B48CPBOV

Back Ordered

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

Active Autowerke - Upgraded Air Charge Pipe - N55 F30, F32, F34, F87 ...

For RWD models only

T#:397303

Part#: 15-004

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i
2012+ F30 335i
2014+ F32 / F33 / F36 435i

Show More Show Less

BMS BMW Billet Port Injection Manifold - Gen 1 B58

T#:38655164

Part#: BMS-BPIM-G1B58

Ships on Nov 10, 2026

$ 2,299.00 USD

Add to Wish List

Qty

$ 2,299.00 USD

Add to Wish List

Upgrade your factory plastic B58 intake manifold to the high-flow, high-strength aluminum Burger Motorsports Intake Manifold. Engineered for direct fitment, this precision-designed upgrade enhances durability, improves airflow, and supports high-performance builds. Key Features & Benefits: Increased airflow for improved performance Precision-machined aluminum—stronger and more durable than stock Integrated top-mount port injection bungs for optimal injector spray pattern 1/8" expansion vacuum ports—ideal for boost gauges, BOV references, or Hobbs switches Lightweight design with all factory connections for seamless installation Includes high-quality O-rings and all necessary hardware Compatible with your factory intercooler core Optional Port Injection & Fueling Upgrades Available with or without port injection hardware, including calibrated Bosch EV14 42mm fuel injectors and a plug-and-play fuel line: 550cc injectors—ideal for setups under 700whp 750cc injectors—recommended for 700-800whp builds 950cc injectors—for higher-power applications FREE $99 BMS B58 Phenolic Thermal Intake Manifold Spacer Included in the kit, this fiber-embedded phenolic spacer reduces heat transfer from the cylinder head to the intake manifold, resulting in lower intake air temperatures, denser air, and improved combustion efficiency. 🔥 Upgrade your B58 intake system today for superior strength, airflow, and performance! 🔥

Show More Show Less

Burger Motorsports Performance Intake - B58 F Chassis 240/340/440 ...

Not for sale or use in the state of California.

T#:556811

Part#: BMS-B58-INT

Ships on Nov 10, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**

Show More Show Less

BMC Performance Air Filter - F3X 335i 435i, F87 M2, F22/3 M235i ...

T#:398733

Part#: FB740/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

BMC Performance Air Filter - F22/23 228i, F3X 320i/i xDrive 328i/i xD...

T#:398727

Part#: FB702/20

Back Ordered

$ 88.00 USD

Add to Wish List

Qty

$ 88.00 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - BMW F-Chassis 23...

Not for sale or use in the state of California.

T#:556807

Part#: BMS-B48-INT

Ships on Nov 10, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

This plug and play air intake system unlocks up to 8whp to the wheels from your B48 BMW engine. In addition to the extra power throttle response, turbo spool, and sound are dramatically improved, finally allowing you to hear your turbo spool up under heavy acceleration. The system is CNC machined from billet aluminum, anodized black for a clean look and includes a reusable S&B high flow filter. The OEM cold air intake tube and insulating base remain fully functional. Install takes only minutes and is fully reversible. Made in USA. Features & Benefits Adds up to 8+ wheel horsepower Dramatic sound improvement Improves throttle response Huge 3.5" inlet Retains OEM cold air ducting Looks great under the hood Renewable air filters Made in the USA What's included: (1) Billet MAF Housing (1) Renewable 1123 inverted cone filter w/clamp (1) Billet bracket (2) 6/32 x 3/8" internal hex socket cap MAF screws (1) 10-32 x 5/8" internal hex socket cap bracket screw (1) bracket screw washer

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

FTP Motorsport Intake Pipe - F22/23 F3X B58

T#:586882

Part#: SG71439

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

T#:578627

Part#: SG71386

Special Order: No Guaranteed ETA

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Turbo Inlet - F1X/F2X/F3X N20

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58

T#:5108986

Part#: FB58FRONTMOUNT

Ships on Nov 10, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

FTP Motorsport Turbo Inlet Pipe - F22/23 F3X B48/46

T#:578631

Part#: SG71413

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes.

Show More Show Less

FTP Motorsport High Performance Charge Pipe - F2X/F3X N55

T#:581354

Part#: SG71337

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

T#:578662

Part#: SG71337F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

BMS Elite Intake With Turbo Inlet - F Chassis B58 - Red

T#:38789912

Part#: ELITEB58INTAKER

Back Ordered

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥

Show More Show Less

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

FTP Turbo Inlet Pipe - F22 F3X F87 N55

T#:582215

Part#: SG71443

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber

Show More Show Less

FTP Motorsport Boost pipe - F2X, F3X N55

T#:582219

Part#: SG71337BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Boost Pipe - F2X, F3X N20

T#:578639

Part#: SG71335-BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Dynamic Air Scoops - F22/23 F3X

T#:586843

Part#: SG71377

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These scoops will increase the air volume that enters the engine thus providing a denser air charge. These pair excellently with an aftermarket intake system or a high-flow filter.

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Nov 10, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - F22 F87 2 Series...

For vehicles equipped with a manual transmission only

T#:24677026

Part#: BMSF3XN55INTREDM

Ships on Nov 10, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58 - Red

T#:38789908

Part#: FB58FRONTMOUNTR

Ships on Nov 10, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks. In addition to freeing up power, turbo spool speed is greatly improved and there's an incredible sound improvement. You'll finally be able to hear your turbos spooling! The proprietary high flow inverted cone filters can be cleaned every 15-20k miles using a cleaning kit and will last the life of the car. FEATURES AND BENEFITS Adds up to 12+ Horsepower Dramatic sound improvement Unique look Improves throttle response Huge 3.5" mandrel-bent aluminum tubing Classy gloss black powder coat finish CNC Billet aluminum fittings Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

Phoenix Racing Port Injection Intake Manifold With 750cc Injectors An...

T#:47644944

Part#: N55PIIMINJECT

In Stock

$ 1,038.00 USD

Add to Wish List

Qty

$ 1,038.00 USD

Add to Wish List

Burger Motorsports' N55 High-Flow Aluminum Intake Manifold is an upgrade designed to replace the factory plastic intake manifold, enhancing both durability and performance for BMW N55 engines. Built from high-strength, lightweight aluminum, this manifold supports high flow rates and integrates top-mount port injection bungs for optimized fuel delivery and injector spray patterns. The manifold also features additional expansion vacuum ports, making it ideal for connecting larger blow-off valves, gauges, Hobb’s switches, and more.

Show More Show Less

BMS Elite Intake - F Chassis B58

T#:5108984

Part#: ELITEB58INTAKE

Ships on Nov 10, 2026

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.

Show More Show Less

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold

T#:27171924

Part#: BMSB58G1-PRM

Ships in 8 Business Days

Starting at $ 3,158.00 USD

Add to Wish List

Starting at $ 3,158.00 USD

Add to Wish List

Add more fuel via port Injection while increasing airflow in your Gen 1 B58 Powered BMW When it comes to intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your weak factory plastic B58 manifold with a direct fit high flow high strength aluminum manifold. Features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion vacuum ports perfect for gauges, BOV references, or Hobbs switches. Includes high-quality o-rings and all required hardware. Your factory high-quality intercooler core slides right in. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or ala-cart without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options. For most 700-800whp applications we suggest the 750cc injectors, while the 550cc injectors are suitable for applications below 700whp. This kit includes a FREE $99.00 Burger Motorsports B58 Phenolic Thermal Intake Manifold Spacer FEATURES AND BENEFITS Increased flow Integrated top mount port injection bungs Much stronger than stock Looks amazing under the hood Lightweight aluminum construction All factory connections Extra ports for a BOV, Hobb's switch, or boost gauge Includes upgraded high-temperature o-rings Optional Motiv Reflex + Injector Controller Optional Injector Block Off Plugs Optional Deasthwerks 1000cc Injectors

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...

For Gen1 B58

T#:3047551

Part#: SG71391-R

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP High Flow Air Filter - N20 F2x/F3x

T#:5788167

Part#: GN20

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

FTP High Flow Air Filter - N55 F2x/F3x/F87

T#:5788171

Part#: GN55F3X

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 2 Series F22 (2014+)

Sub-Categories

Replacement N55 Performance Filter from Burger Motorsport

Key Features:

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results