BMW Control Arm Replacements & Upgrades for BMW 2 Series F22 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

Febi - Corporate Logo
T#:382082
Part#: 33326792551
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up
Fits the left and right side
KMAC - Corporate Logo
T#:600206
Part#: 193926-3H
Ships on Aug 17, 2026
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping
Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
Show More Show Less
Genuine BMW Motorsport - Corporate Logo
T#:390410
Part#: F220033323R
Ships on Aug 21, 2026
$ 4,609.54 USD
$ 4,609.54 USD
Rubber has no place on a race car (except for tires, of course). Rubber suspension bushings are one of the first things to get swapped out for our race cars. The more solid the better when it comes to controlling the alignment and keeping your race setup consistent. We use as much solid material as the rules allow. With no deflection, solid bushings also give amazing feedback to the driver. For the M235iR, BMW had two specs for the rear control arms - stock stamped steel control arms with a rubber/neoprene bushing that is slightly stiffer than stock (2014-2015 spec) and these aluminum/stainless steel control arms with solid Heim-jointed ends (2016 spec). An additional benefit to the Heim joints is the arms are adjustable so the alignment can be perfectly dialed in. The front control arms use M3/M4 thrust arms and wishbones with sealed monoball joints. Full solid mounts and bushings will give you many setup options with razor sharp steering and chassis response. Note: 2016-spec rear control arms do not have a spring perch like the factory arms. These are for rear coil over shocks only.
Show More Show Less

BMW Control Arm Bush
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38553888
Part#: 33326792543SK1
Special Order: No Guaranteed ETA
$ 21.99 USD
$ 21.99 USD
Rear Upper Control Arm Bushings Enhance suspension stability and driving precision with Rear Upper Control Arm Bushings, designed to minimize play and improve overall handling dynamics. These premium bushings replace worn factory components, ensuring proper alignment and a more responsive driving experience. Key Features: OEM-Grade Construction – Designed to meet or exceed factory standards for a perfect fit. Long-Lasting Durability – Crafted from high-quality materials to resist wear, cracking, and deformation. Enhanced Suspension Performance – Reduces excess movement, improving handling, stability, and alignment. Simple Installation – Direct-fit replacement with no modifications required for hassle-free installation. Improved Ride Comfort – Minimizes vibrations and excessive play, ensuring a smoother, more controlled ride. Upgrade your suspension with Rear Upper Control Arm Bushings for improved handling, longevity, and driving confidence.
Show More Show Less

OEM Febi Rear Upper Control Arm - Right - BMW F22/23 F3X
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38452837
Part#: 33326792540S1
Special Order: No Guaranteed ETA
$ 60.99 USD
$ 60.99 USD
The control arm keeps the lower wheel straight and in contact with the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. This replacement control arm is the perfect option to restore your BMW's handling and get back on the road.
Show More Show Less
OEM Febi Rear Upper Control Arm - Left - BMW F22/23 F3X
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38452835
Part#: 33326792539S1
Special Order: No Guaranteed ETA
$ 61.99 USD
$ 61.99 USD
The control arm keeps the lower wheel straight and in contact with the ground. If you have been in an accident or your bushings are beginning to fail, the only solution is replacement. This replacement control arm is the perfect option to restore your BMW's handling and get back on the road.
Show More Show Less