Amplify your driving experience with heightened turbo/induction sound, along with increased air flow, throttle response, and overall performance.

Discover a whole new driving experience, complete with captivating induction sounds, heightened throttle response, and noises you have not yet heard from your turbo. Unleash the full potential of your turbo and engine by ditching the restrictive enclosed intake box. The factory intake is no match for your N55 paired with the Luft-Technik Intak Intake.

It is important to highlight the distinctive dual-cone filter design, featuring a standard conical shape with a smaller inverted cone in the center. This configuration produces an exhilarating sound when lifting off the throttle. The airflow pattern as air exits the filter creates a unique turbo flutter sound, adding to the excitement of the driving experience.

The stock intake box, often labeled as a muffler/silencer, is engineered to dampen induction noise for a more refined ride. However, as enthusiasts, we crave the exhilarating sound of our induction as we accelerate. Our ECS intake is tailored for enthusiasts who seek a heightened driving experience. Crafted with function in mind, it features a silicone coupler, rotomolded inlet tube, heat shield, and filter, seamlessly integrating with the OE fresh air scoop and utilizing stock mounting locations. Experience enhanced performance and a renewed passion for driving with the ECS Luft-Technik Intake for your N55.

Key benefits:

Increased induction noise
Enhanced throttle response
+7 WHP / +14 FT-LBS TQ(peak gains) and +12 WHP / +15 FT-LBS (max gains)
Free-flowing for decreased strain on the turbo
Unique sounds from the dual-cone filter
Factory MAF scaling
Mounts to factory locations
Online installation instructions
Design:

Durable, lightweight 5052 heat-shield, finished in wrinkle black powder coat
4 Ply silicone coupler
Billet aluminum MAF flange
Rotomolded intake tube with smooth internal tubing for uninterrupted flow
Installs in front of the factory cold air duct
Kit Contents:

Silicone turbo coupler
Rotomolded inlet tube
Powder coated heatshield
Dual cone filter
Seals, clamps and hardware for installation

The ECS tow hook is a perfect starting point for our ECS tow mounted accessories or as a clean looking tow hook. In-house engineering designated this tow hook as the core that started it all when deciding the "must have" features when utilizing the factory tow hook location. The 4140 normalized steel gives our tow hook the strength needed to safely tow your car around and a black melonite coating to keep it aesthetically appealing.

Tow hook

• 1144 heat treated steel threaded adapter & bolt
• 4140 normalized tow hook
• All black melonite coating for extreme durability and corrosion resistance
• 54mm extension
• Includes the allen keys needed to make proper adjustments
• In-house designed & ECS engineered
• Made in America

Enhance the appearance of your BMW F22 with this M-Sport style front bumper cover from ECS Tuning

Crafted to elevate your vehicle's aesthetics, this bumper features an aggressive design that will make your car stand out from the crowd.

Includes:

• Headlight washer cutouts/covers
• Center mesh grille
• Side Mesh grille
• Tow hook cover

Transform your BMW F22 into a head-turning masterpiece with this M-Sport style front bumper cover from ECS Tuning.

Black Chrome UNIVERSAL Swivel Exhaust Tip - 4.0" offers both style and adjustability with its innovative design. This exhaust tip features a unique swivel collar that allows for precise alignment and perfect fitment. The tip can be adjusted to any direction, and once set, it remains securely in place by tightening the hex bolt to 14 ft-lbs (19 Nm).

• Precision Laser Etched Logo: Each tip includes a laser-etched logo for a premium look.
• Durable Construction: Built with chrome-plated nuts, a 304SS cap screw, clamp, insert ring, and exhaust tip for longevity.
• Stylish Design: Features a slant cut, double-wall construction, and rolled edge for a striking appearance.
• Versatile Fitment: Available in a 4.0" outlet and finished in a sleek black chrome.
• Dimensions:
  • Inlet Size: 3.0"
  • Overall Length: 7.0" (6.0" Tip + 1.0" Clamping Surface)
  • Outlet Size: 4.0"
  • Outlet Style: Double Wall, Rolled Edge, Slant Cut

Modification may be required for proper fitment.

Transform Your BMW's Exhaust System with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four

• Elevates the appearance of your BMW's exhaust system
• Crafted from durable titanium for long-lasting performance
• Features a stylish burnt finish for a unique look
• Comes in a set of four for a complete upgrade

Upgrade the look of your BMW's exhaust system with the ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four. Made from high-quality titanium, these exhaust tips are built to last and provide a touch of elegance to your vehicle. The burnt finish adds a distinct visual appeal, making your BMW stand out from the crowd. With four tips included in the set, you can achieve a comprehensive upgrade for your exhaust system.

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a quality high-performance brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new EP24 "Enthusiast Performance" brake pad! If you're looking for a streetable, track-capable, performance brake pad, look no further than the ECS EP24!

Features & Benefits:

Strong stopping power - Increased coefficient of friction offers satisfying stopping power when cold (a necessity for a street pad!) and even more G-force-inducing power when they warm up. With cold and warm friction comparable to Hawk HPS (and higher than many other street pads) the stopping experience with the EP24 pad is impressive for street-driven vehicles on streetable tires. Positive initial bite - Race pads have the reputation of acting like an on/off switch, which is a no-go for a pad for a street application. The EP24 offers OE-level initial bite for low-stress braking in stop-and-go situations. Reasonable dust - Race pads utilize a high metallic composition. Pads that use high amounts of metal not only dust terribly, but also will bake onto wheels with high temperatures and are a bear to clean. This is not the case with these performance street pads. Now using these pads on most of our shop cars, we’ve found over time that dust is comparable to factory pads in most applications (with greatly improved braking performance). Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. While not as quiet as our ceramic DD23 pad, you’ll still be able to drive your spouse to dinner. Long life - This should be an obvious one. Even in a performance pad, your daily driver pads should last and last, so that was key in selecting our ideal compound. This compound wears slower and is kinder to rotors than two of the top competitors.

EP24 "Enthusiast Performance" brake pads are included in our Lifetime Replacement Program for worry-free motoring.

Achieving precise exhaust fitment can be tricky—especially when the exhaust hanger has room to slide. This movement can cause annoying rattles or even lead to contact with the underbody or rear bumper. The ECS Tuning Exhaust Locking Collar offers a simple and effective fix. Designed to clamp securely around the exhaust hanger, this collar keeps everything firmly in place, eliminating unwanted movement.

Crafted from high-strength 6031 billet aluminum and finished in a sleek black anodized coating, it delivers both durability and corrosion resistance. With this collar in place, your exhaust stays exactly where it should—no rattles, no surprises.

Product Design:

Made from precision machined 6061 aluminum Black anodized finish Stainless steel M5 X 0.8mm hardware Installation & Support:

Install the locking collar around your exhaust hanger, position the hanger in place, and snug the locking collar down in place against the hanger! ECS Exhaust Hanger Locking Collars are available for 10mm and 12mm exhaust hangers. Please measure your hangers before ordering. The 10mm locking collar can be found HERE.

Revamp Your Suspension with the BMW & MINI Coilover Wrench Set

• Compatible with BMW and MINI models for versatile use
• Durable construction ensures long-lasting performance
• Ergonomic design provides comfortable handling during installation
• Allows for precise adjustment of coilovers for optimal ride quality

Upgrade your BMW or MINI's suspension system with the BMW & MINI Coilover Wrench Set. This set is compatible with various BMW and MINI models, offering versatile compatibility for a wide range of vehicles. Constructed from durable materials, these wrenches are built to withstand the rigors of frequent use and provide long-lasting performance. The ergonomic design ensures comfortable handling during installation, reducing fatigue and allowing for more efficient work. With the BMW & MINI Coilover Wrench Set, you can easily adjust your coilovers to achieve the optimal ride quality for your vehicle.

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips boast a sleek, matte titanium finish and a slant-cut, single-wall outlet that delivers a stunning visual appeal. Engineered for durability, they feature chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Stunning matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a sleek appearance
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 33mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length. 

Is your BMW hood emblem showing signs of wear and tear?

If it's cracked or faded, it's time for a replacement. Introducing the Roundel removal tool, designed specifically for effortless removal of your old emblem and installation of the new one. Made with durable nylon, this tool is both thin enough to fit under the roundel and strong enough to avoid breakage. Say goodbye to your old emblem with ease and give your BMW a fresh, shiny upgrade.

Benefits:

• Effortlessly removes old hood emblems
• Facilitates easy installation of new emblems
• Durable nylon construction ensures longevity
• Compatible with various BMW models

Upgrade your BMW's wheel setup with ECS Tuning's Extended Wheel Bolts. Available individually or with matched spacers for easy fitment, these bolts meet strict ISO 898 class 10.9 standards for mechanical and physical properties. Lab-tested to ensure compliance, they offer reliable and durable performance. The 14mm diameter, 1.25mm thread pitch, and 43mm length make these bolts ideal for various applications, providing a secure fit for your wheels.

• Extended wheel bolts for BMW
• Available individually or with matched spacers
• Meets ISO 898 class 10.9 standards
• Lab-tested for compliance and reliability
• 14mm diameter, 1.25mm thread pitch, 43mm length
• Ideal for wheel spacer applications

ECS Tuning Stainless Steel Hose Clamps for BMW

Upgrade your BMW's hose clamps with ECS Tuning Stainless Steel Hose Clamps, designed for convenience and durability. Say goodbye to long waits and overpriced dealership clamps. With various band widths available, these stainless steel clamps ensure a secure fit for your vehicle's hoses.

Benefits:

• Convenient replacement for worn-out hose clamps
• Made of durable stainless steel for long-lasting performance
• Available in various band widths for versatile use
• Affordable alternative to dealership pricing

ECS Tuning 304 Stainless Steel Hose Clamps

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Made from high-quality 304 stainless steel for durability
• German-style design with T-bolts allows for easy size adjustment
• Various band widths for versatile use
• Avoid dealership pricing without compromising on quality
• Perfect for BMW enthusiasts seeking affordable yet reliable hose clamps

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

• Made from high-quality stainless steel for durability and corrosion resistance
• M18x1.5mm threads ensure compatibility with most oxygen sensors
• Ideal for custom exhaust setups or replacing damaged bungs
• Essential for automotive enthusiasts looking to upgrade their exhaust system

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

• High-quality materials for exceptional strength
• Secure tightening with allen head design
• Versatile usage for automotive, construction, and DIY projects
• Reliable and durable solution for various applications

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 50mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length.