Due to weak plastic construction, the factory plastic crankcase ventilation breather hose is known to fail. After years of exposure to piping-hot engine bay temperatures and chemical-laden oil vapors, the corrugated plastic tubing can crack, crumble, or fail altogether.

We set out to bulletproof your N20 PCV system with a durable silicone breather hose, designed to provide a comprehensive upgrade and permanent replacement for the factory plastic hose. By replacing the flimsy, heat-hardened OEM plastic hose with a four-ply fluorosilicone hose, you'll experience peace of mind knowing your N20 is free from the inevitable return of oil leaks, vacuum leaks, and drivability concerns that would have been.

This breather hose is found at the front of the engine, and is used to connect the inlet pipe to the valve cover. It replaces OEM part number 11127588417.

Features:

Silicone construction ensures a durable replacement that is sure to outlast OE plastic
Designed as a direct replacement for the factory breather hose
Retains heating function and OE electrical connector
Design:

Four-ply wire-reinforced fluorosilicone hose is designed to resist degradation due to exposure to oil vapors
O-rings are pre-installed in OE connectors for a lasting seal
Includes pre-installed zinc-coated hose clamps for durability and corrosion resistance
Product Development:

Our Silicone PCV Hose Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

High performance ignition kit for your N20 featuring Brisk 1 step colder spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

The Schwaben Piston Ring Filer is a vital tool for obtaining the precise end gap necessary for optimal piston ring performance.

This filer allows you to swiftly and accurately file piston rings to exact measurements, enhancing your engine’s efficiency and lifespan. By simply positioning the piston ring and turning the handle, you can easily rotate the abrasive wheel for a smooth and effective filing process.

**Note:** For the Schwaben Universal Piston Ring Compressor, check out T25805755!

Key Features:

• Optimize Performance: Achieve the perfect end gap crucial for top engine efficiency.
• Quick and Precise: File rings to exact specifications with ease.
• Easy Operation: Position the piston ring and turn the handle to effortlessly rotate the abrasive wheel.
• Enhanced Engine Longevity: Accurate end gaps contribute to longer engine life and better performance.

Instructions:

1. Position the Ring: Place the piston ring on the outer edge against the stop and align the ends squarely against the grinding wheel. Apply light, even pressure against the wheel to prevent grinding too large a gap.
2. Operate the Tool: Turn the handle so the grinding wheel turns towards the inside edge of the ring (counter-clockwise when viewed from the handle side of the tool).
3. Exercise Caution: This is a diamond grinding wheel. It cuts fast!

Checking Piston Ring Gap:

1. Deburr the Ring Ends: Carefully remove any burrs on the ring ends before placing the ring in the bore. A light touch with a fine abrasive stone works well.
2. Clean the Rings: Thoroughly clean the rings with lacquer thinner or acetone, as the paint coating from the factory may occasionally scratch the cylinder bore. Always wear gloves during this process.
3. Position the Ring in the Cylinder: Place the ring squarely in the cylinder bore, about 1" down from the deck surface. An upside-down flat-top piston will help you properly square the ring.
4. Measure the End Gap: Use a feeler gauge to measure the ring's end gap. Apply light grinding pressure and check frequently to avoid making the end gap too large.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Achieve flawless camshaft alignment on your BMW N20 and N26 engines with the Schwaben N20/N26 Timing Tool Kit. Designed to precisely align camshaft timing at the TDC position and lock the VANOS system for accurate sprocket installation, this tool set is a must-have for any timing job.

Securely stored in a durable blow-molded case, this kit is both easy to store and transport. The Schwaben N20/N26 Timing Tool Kit is a crucial addition to any professional or DIY mechanic's toolkit, ensuring the precision and dependability required for peak engine performance.

Additionally, our LIFETIME REPLACEMENT program guarantees that we will take care of any issues you may encounter with the set, so you can focus on the task at hand!

Includes:

• Camshaft Locking Tool
• Camshaft Fixating Base
• T.D.C. Alignment Pin (83300495070)
• Chain Tensioner
• M6 x P1.0 L: 130mm
• M6 x P1.0 L: 60mm
• M6 x P1.0 L: 45mm (Quantity: 2)

Other Tools Needed:

• BMW Flex Plate Lock Tool (We Suggest: T584148 - CTA N20/N26 Flywheel Holder)
• Oil Pump Lock Kit (If removing oil pump) (We Suggest: T586212 - CTA Oil Seal Repair Kit)
• 8mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 10mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 13mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 14mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 16mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 17mm Socket/Wrench (We Suggest: T363185 - Combo Wrench Set)
• 22mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 24mm Socket/Wrench (We Suggest: T21209842 - 1/2" Dr. Socket Set)
• 27mm Socket/Wrench (We Suggest: T361018 - 1/2" Dr. 27mm Socket)
• E6 Socket (We Suggest: T363279 - E Torx Socket Set)
• E7 Socket (We Suggest: T363279 - E Torx Socket Set)
• E8 Socket (We Suggest: T363279 - E Torx Socket Set)
• E10 Socket (We Suggest: T363279 - E Torx Socket Set)
• E20 Socket (We Suggest: T363279 - E Torx Socket Set)
• T30 Socket (We Suggest: T386445 - Torx Socket Set)
• T40 Socket (We Suggest: T386445 - Torx Socket Set)
• T45 Socket (We Suggest: T386445 - Torx Socket Set)
• 5mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)
• 8mm Hex Socket (We Suggest: T21209844 - 1/4" Dr. Socket Set)

Replaces BMW OEM Tools:

• 83302212831
• 83302212830
• 83302219548
• 83300495070
• 1197340

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

• Made from high-quality stainless steel for durability and corrosion resistance
• M18x1.5mm threads ensure compatibility with most oxygen sensors
• Ideal for custom exhaust setups or replacing damaged bungs
• Essential for automotive enthusiasts looking to upgrade their exhaust system

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

• High-quality materials for exceptional strength
• Secure tightening with allen head design
• Versatile usage for automotive, construction, and DIY projects
• Reliable and durable solution for various applications