Eliminate the factory clutch delay valve and enjoy faster, more precise clutch engagement with the ECS Clutch Delay Valve (CDV) Removal Tool Kit. Designed for F and G-Chassis manual BMWs, this kit makes removing the hydraulic restrictor safe, simple, and reliable, no slave cylinder removal required.

Most modern BMWs come from the factory with a plastic slave cylinder featuring a CDV, intended to smooth engagement and reduce driveline shock for less experienced drivers. In practice, this restrictor can dull pedal feedback, slow shifts, and increase clutch wear. Removing it restores the sharp, direct clutch feel that BMW enthusiasts expect.

Key Benefits:

Faster, more predictable clutch engagement
Sharper pedal response and connected driving feel
No need to remove the slave cylinder
Tool Design:

Machined from durable 304 stainless steel
Includes precision removal and insertion tools
Knurled grip for easy handling
Built-in depth and angle control protects internal surfaces and ensures proper grommet alignment
Removal and Installation:

Disconnect the Clutch Line
Remove the clutch line from the slave cylinder to access the factory clutch delay valve.
Remove the Restrictor Plate
Thread the removal tool into the center of the small grommet. Once engaged, carefully pull the tool to remove the grommet and restrictor plate. The small rubber sealing O-ring will come out along with the plate.
Reinstall the O-Ring
Place the rubber O-ring onto the installation tool. Insert the tool into the slave cylinder to properly seat the O-ring in its original position.
Reconnect and Bleed the Clutch
Reattach the clutch line, add fluid, and bleed the system according to your manufacturer’s instructions.
Enjoy Enhanced Clutch Feel
With the delay valve removed, your clutch now engages faster and more predictably, giving your manual transmission the sharp, connected feel it was designed for.

The Schwaben aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

Features:

• Longer & Lighter
• Made of 6061-T6 aluminum
• Anodized for hardness and good looks
• Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

The ability to see whats going on with your car is very important when you're running performance upgrades to make sure everything is going well. The newer cars have been reducing the gauges on the cluster and in some cases moving to a digital reading, but in many cases still limits what you can see. 

This vent pod was designed in-house to have an OE look and fitment and give you the ability to add a 45mm gauge for things like Air/Fuel, Oil Temp, Coolant Temp, & Boost Pressure.

This item fits the following BMWs: 
2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon 
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo 
2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe 
2015+ F80 BMW M3 
2015+ F82 BMW M4 

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (we make 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

This kit is for purchase only. It's perfect for shops or racecars where changing wheels or brakes is common. We also have kits that are available for rent.

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 255mm (10") to 315mm (12.4") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 255 mm - 315mm range of adjustment.

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Modern BMW's are beginning to leave the performance derived handling and power delivery in the past as the demand for more comfort and features rises. The stiff suspension components designed around having the best driving experience from a luxury car has been left for the M models and replaced with soft rubber bushings and mounts. Unfortunately, this is a good move by BMW to support the masses.

The obvious approach was to offer products so the modern BMW can be upgraded into the car the enthusiast desires, superb handling, control, and a direct delivery of power to the rear wheels. When you upgrade to our Delrin subframe mounts you reconnect that power with almost zero negative feedback.

The added appeal to someone looking to take one of these machines on the race track is Delrin can be used when solid mounts are needed and aluminum is not an option with strict regulations found in Grand-Am, BMW CCA, and other racing series.

Product features:

• Precision machined Delrin(TM) 150 bushings.
• Precision machined 6061-T6 aluminum inserts. 
• Class legal for any racing class that does not allow a solid subframe bushing. 

Performance Benefits:

• Eliminates subframe movement for more direct throttle and suspension  response. 
• Minimizes wheel hop due to subframe deflection and movement. 

***Installation Instructions***

These GAC differential bushings/mounts fit the following BMWs: 
2014+ F22 BMW 228i 228iX M235i M235iX 
2012+ F30 BMW 320i 320iX 328i 328iX 335i 335iX - Sedan 
2014+ F34 BMW 328i 328iX 335iX - Gran Turismo 
2014+ F32 BMW 428i 428iX 435i 435iX - Coupe 
2014+ F33 BMW 428i 428iX 435i 435iX - Convertible
2014+ F36 BMW 428iX -Gran Coupe 

Elevate your driving experience with enhanced performance and aesthetics. ECS lowering springs are crafted to optimize both handling and comfort, striking the perfect balance between performance and drivability. With an average lowering range of 1.6", enjoy the benefits of a lower center of gravity, resulting in superior cornering and enhanced steering feedback. Not only do these lowering springs improve handling, but they also deliver a remarkable aesthetic transformation by reducing the wheel gap, giving your car a more planted and fitted appearance.

Features and Design:

Average FRONT lowering of 1.6" - 1.8"
Average REAR lowering of 1.4" - 1.6"
Lowered center of gravity
Compatible with cars equipped with EDC
Linear style springs
Black powder coating with red ECS logo
MADE IN THE USA
Designed specifically for your chassis these ECS lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have a higher spring rate like coilovers, it takes much more force to compress the spring, leading to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. Our springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.

Silicone Coupler - Straight 3" ID (76.20mm) x 3" L

No matter the project, ECS Tuning silicone couplers and elbows offer a high-quality, precision-engineered solution to your needs. Whether you're installing an intercooler, fabricating a custom intake system, or whatever else you can dream up, ECS Tuning has you covered.

• High-quality silicone construction for durability
• Precision-engineered design ensures a perfect fit
• Versatile solution for various automotive projects
• Enhances performance and reliability
• Compatible with BMW and other vehicles

27mm Thin Wrench

For those seeking a versatile tool for tight spaces, the 27mm Thin Wrench is an essential addition to any toolkit. This thin wrench is designed to tackle narrow areas with precision and ease, making it ideal for automotive and mechanical applications.

• Perfect for tight spaces and narrow areas
• Precision-engineered for optimal performance
• Durable construction ensures long-lasting reliability
• Versatile tool suitable for automotive and mechanical tasks

Bring out the sound of your turbo with the ECS Atmospheric Diverter Valve Spacer! The ECS DV Spacer gives your N20 the sound of a blow off valve (BOV) with every gear change and every boosted throttle close! The strategically engineered vent slots allow you to boost on without a CEL (Check Engine Light).

FEATURES:

Anodized Black 6061-T6 aluminum

Features 3 radial slots to let out the “woosh” with optimal flow for all OEM DV types

Engineered to operate CEL-FREE!

Alignment holes for ease of installation

Includes pre-installed, captured Viton O-rings, resistant to chemical degradation

Includes Zinc-plated alloy steel socket head cap screws

Tested for performance and durability

INSTALLATION:

Remove Diverter Valve
Place the spacer onto the DV flange r
Re-install your original DV solenoid atop the spacer with the included longer hardware.
The wastegate actuator must be swung out of the way for install. Loosen both screws retaining the wastegate actuator, then remove the one closest to the actuator, allowing the actuator to swing out of the way. This will allow for ease of installation.

For optimal performance, consider the 46.5mm To 61.0mm Silicone Coupler.

Engineered with durability and functionality in mind, this silicone coupler provides a reliable connection for various components in your vehicle's intake or cooling system. Its smooth interior surface promotes efficient airflow, while its flexible and reinforced construction ensures a secure fit and prevents leaks. Enjoy hassle-free installation and enhanced performance with this premium silicone coupler.

• Durable silicone construction
• Smooth interior surface for efficient airflow
• Flexible and reinforced design prevents leaks
• Secure fit for reliable performance
• Hassle-free installation