Showing 746 results for ""

Reduce weight. Reduce heat. Reduce warping.

ECS Tuning engineered 2-Piece semi-floating rotors offer real-world benefits that can be felt on both the street and track! 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The reduction of unsprung weight improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling.

Features include:

Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high-quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion-resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are unable to cope with the stress of drastic heat fluctuations and are prone to warping. ECS 2-Piece semi-floating rotors allow the radial expansion of the rotor ring - preventing warping. Heat treated: Heat treating of ECS 2-Piece rotors makes them stiffer and stronger - for improved performance and further prevention of warping. Drilled and slotted: 2-Piece rotors are cross drilled to promote cross ventilation for improved cooling as well as slotted to clean brake pads and carry away water and brake dust. Cleaner brake pads result in faster, more consistent stopping. Drilled holes are chamfered while slots are machined with a ball end mill - both to prevent cracking that may be present on improperly machined rotors. Overall weight savings: This particular ECS 2-Piece rotor weighs only 20.95lbs compared to a stock rotor (24.45lbs). Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Kit includes the following parts:

Front ECS 2-piece semi-floating cross-drilled and slotted Front ECS EP24 "Enthusiast Performance" Brake Pads Pad wear sensor ECS stainless steel rotor set screws These rotors are compatible with vehicles using the M sport brake system which is also found standard for certain applications.

Get everything you need to service your front brakes in one convenient kit, perfect for an afternoon project!

This kit includes Brembo rotors, brake pads, and a pad wear sensor. Also included are ECS stainless steel rotor set screws and Syl-Glide Silicone Brake Lubricant to keep everything moving smoothly while preventing rust and seizing.

Brembo is a leading name in brake manufacturing, known for its focus on innovation, performance, and quality. With decades of experience, Brembo designs high-performance brake systems that deliver superior stopping power, heat dissipation, and durability. Their precision engineering makes them ideal for both high-speed sports cars and daily drivers. That's why we've assembled this complete Brembo brake kit for your BMW, offering top-tier quality and reliable performance at a fraction of the cost of Genuine BMW parts.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW F30 EBC RedStuff Performance Brake Pad Set is engineered for performance-driven models, providing exceptional stopping power even under aggressive driving conditions. Designed with a Kevlar fiber-based compound enhanced with ceramic particles, these brake pads offer improved durability and quieter operation compared to previous EBC RedStuff models. This cutting-edge formulation ensures optimal performance, whether the brake discs are hot or cold.

• Exceptional Stopping Power: Effective performance even when brake discs are cold.
• Enhanced Durability: Long-lasting material designed for aggressive driving.
• Quieter Operation: Advanced formulation reduces noise during braking.
• Optimized Performance: Upgraded over previous EBC RedStuff compounds for superior braking.
• Complete Upgrade Recommendation: Ideal to replace rotors alongside pads for maximum braking efficiency.

For optimal performance, it is essential to bed in the new pads and rotors properly. Turner Motorsport offers a wide variety of brake rotors compatible with your vehicle, ensuring that you achieve the best braking performance and longevity.