Showing 2261 results for ""

Sort By:

MMX Performance - Corporate Logo
T#:4565826
Part#: MMR17-0101
Back Ordered
$ 70.99 USD
Free Shipping on orders $49 and up
MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.
Show More Show Less
SnowPerformance - Corporate Logo
T#:589560
Part#: SNO-40201
In Stock at Vendor
$ 74.99 USD
Free Shipping on orders $49 and up
Installs easily for an accurate boost reading every time.
Permatex - Corporate Logo
T#:3672391
Part#: 22058
Ships in 1 Business Day
$ 20.99 USD
Free Shipping on orders $49 and up
Protects electrical connections and wiring from salt, dirt and corrosion

MANLEY - Corporate Logo
T#:17073607
Part#: 647005C-6
In Stock
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

BMW N55 S55 37cc Platinum Series Dish Piston Set - 84.5mm Bore is designed for high-performance applications, providing exceptional strength and durability for BMW engines. Turner Motorsport offers this premium piston set to enhance engine reliability and efficiency.

  • High-Strength Material: Crafted from 2618 high-strength material for superior durability and performance.
  • Quiet Start-Ups: Offset wrist pin design minimizes noise during engine start-ups.
  • Premium Pins: Includes a .210” wall Premium Chrome Moly pin (Standard Series) or a .210” wall 9310 alloy pin (Extreme Duty Series) for added strength.
  • Pressure Balance Groove: Features a pressure balance groove to improve piston stability and efficiency.
  • Valve Accommodation: Designed to accommodate +1mm valve sizes for enhanced engine performance.
  • Top-Quality Rings: Comes with premium steel top rings, Napier seconds, and round wire locks for optimal sealing and reliability.
  • Recommended Clearance: Piston clearance of .0035” measured .850” from the bottom of the oil ring for precise fitment.
Show More Show Less

ARP - Corporate Logo
T#:1105898
Part#: 201-4701
In Stock at Vendor
20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
20% off MSRP
$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD
Free Shipping
For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

MMX Performance - Corporate Logo
T#:4565831
Part#: MMR17-0501FK
Ships in 6 Business Days
$ 476.99 USD
Free Shipping
$ 476.99 USD
Free Shipping
Higher mileage engines and especially ones with direct-injection are prone to carbon build-up on the backs of the inlet valves. However, when deposits are removed by the catch can's filter and separation process, the intake air receives less oil and more oxygen, resulting in a cleaner, more reliable, and better performing engine. MMR's Performance catch can kit For N55 powered M235i's and M2's was designed to help owners ensure their engines are running at optimum performance This is done by removing unwanted oil from the PCV system before it can get back into the intake. The T-6061 billet filter housing, anodized in the trademark MMR finish, comes with a billet bracket for easy installation, including all hoses and fittings necessary for installation. The catch can kit has been designed to offer added performance, allow easy installation and enhanced aesthetics too. Checking the level for any oil removed from the intake system is easy thanks to the integral dipstick. A cap-head bolt mounted in the lower section of the catch can allows for easy draining, or if you prefer, the lower section itself can be easily unscrewed and removed. Features: Effectively prevents oil build-up in the intake system and intercooler walls Maintains optimum engine performance Easy installation with all supplied hardware included Race fittings and PTFE-lined hoses throughout Easy oil level checking and draining
Show More Show Less
MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 2 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less

Arc Terminator - Corporate Logo
T#:26471609
Part#: AT231F22BLA40MN5
In Stock
$ 59.99 USD
Free Shipping on orders $49 and up
A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less

Victor Reinz - Corporate Logo
T#:369383
Part#: 12611744292
In Stock at Vendor
$ 8.99

This product was last offered at the strikethrough price on
08-26-2026

$ 7.99 USD
Free Shipping on orders $49 and up
$ 7.99 USD
Free Shipping on orders $49 and up
Used to seal sensor to the oil pan
Corteco - Corporate Logo
T#:594945
Part#: 11137605018
Ships in 1 Business Day
$ 5.99 USD
Free Shipping on orders $49 and up
The oil drain plug is a crucial component to your oil changing process. Old drain plugs often get damaged when loosening and tightening. Replace yours today to avoid problems with your oil change.
Iwis - Corporate Logo
T#:36981080
Part#: 90001301
In Stock
$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 304.83 USD
Free Shipping
$ 304.83 USD
Free Shipping
Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.
Show More Show Less


Performance Tool - Corporate Logo
T#:1809130
Part#: W89409
Ships in 1 Business Day
$ 126.99 USD
Free Shipping
$ 126.99 USD
Free Shipping
For servicing overhead valve engine with cylinder head removed.
URO Vacuum Pump Seal - BMW N20 2.0L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:638479
Part#: 11127507217
Ships in 1 Business Day
$ 12.99 USD
Free Shipping on orders $49 and up
Replacing this component can prevent leaks and other catastrophic failures.
Performance Tool - Corporate Logo
T#:1809147
Part#: W5202
In Stock at Vendor
$ 21.99 USD
Free Shipping on orders $49 and up
Nitrile Butadiene Rubber

TurboSmart - Corporate Logo
T#:35053713
Part#: TS-0604-1067
In Stock
10% off MSRP $ 280.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 252.99 USD
Free Shipping on orders $49 and up
10% off MSRP
$ 280.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 252.99 USD
Free Shipping on orders $49 and up

Turbosmart BMW N20 VIWG Wastegate Actuator - 6inHg is designed to enhance turbo performance and boost control on BMW N20 engines, delivering improved reliability and responsiveness. This high-quality actuator replaces the factory wastegate actuator, providing better stability and minimizing boost leaks under demanding conditions. Ideal for enthusiasts looking to optimize their BMW’s turbo efficiency, this actuator offers superior control and durability.

  • Designed specifically for BMW N20 engines
  • Boost control enhancement for increased performance and responsiveness
  • 6inHg spring for precise pressure control
  • Robust construction reduces the risk of boost leaks
  • Manufactured by Turbosmart, a trusted brand in performance turbo components
  • Compatible with a variety of BMW models, ensuring a perfect fit
  • Available through Turner Motorsport

With Turbosmart’s high-performance design, the BMW N20 VIWG Wastegate Actuator - 6inHg is a perfect choice for drivers looking to upgrade their turbo system. This wastegate actuator is engineered for those who demand better boost stability, control, and overall performance from their vehicle.

Show More Show Less

Pure Turbos - Corporate Logo
T#:46684829
Part#: B58G1P600
Ships in 6 Business Days
$ 1,343.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD
Free Shipping on orders $49 and up
$ 1,095.00 USD
Free Shipping on orders $49 and up
Looking to upgrade your turbo? Pure Turbos now offers their PURE600 B58 Turbo Upgrade kit! Pure Turbo's PURE600 turbo kit is designed to support 550+ wheel horsepower with supporting modifications. This is more than enough power to thoroughly enjoy driving your BMW on the street and for occasional track outings.
Show More Show Less
Norma - Corporate Logo
T#:594670
Part#: 64218367179
Ships in 2 Business Days
$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD
Free Shipping on orders $49 and up
$ 2.99 USD
Free Shipping on orders $49 and up
Clamps are like bolts and nuts, as you can never have enough of them. If you do work on your vehicle in your home, you are going to need clamps often. If you need one clamp, why not get a few to ensure that you are always prepared.
Show More Show Less

VTT F Series B58 Engine Catch Can - W/ -6 Drain Valve
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18236100
Part#: VTTB58CATCH1
Ships in 10 Business Days
$ 377.99 USD
Free Shipping
$ 377.99 USD
Free Shipping
VTT is proud to present our F Series B58 engine catch can setup. This kit includes our renowned modular catch can, a precision CNC-machined 6061 aluminum bracket, VTT CNC banjo fittings, robust 5-ply silicone hoses, and push-lock fittings. Installation is simple and takes approximately 30 minutes to 2 hours, depending on your experience, requiring the replacement of just one factory hose with the provided VTT hoses. The result is a clean, OEM-quality fit and finish. What distinguishes our kit from others is the use of high-quality AN fittings and VTT’s custom banjo adapters, delivering unmatched durability and performance.
Show More Show Less
Valve Cover Gasket Kit - BMW N20
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:30164647
Part#: 11127507217KT2
Ships in 1 Business Day
$ 73.99 USD
Free Shipping on orders $49 and up

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Vacuum Pump Seal Valvetronic Actuator Seal HPFP Screws (2) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Victor Reinz - Corporate Logo
T#:593012
Part#: 13547563377
Ships in 1 Business Day
$ 11.99

This product was last offered at the strikethrough price on
08-26-2026

$ 9.99 USD
Free Shipping on orders $49 and up
$ 9.99 USD
Free Shipping on orders $49 and up
Seals the throttle body to the intake manifold

Pure Turbos N20 Pure400 Turbo Upgrade - BMW N20 2.0L (w/ EWG) ...
For vehicles with a production date from 11/2012 For vehicles with a production date from 07/2012
Pure Turbos - Corporate Logo
T#:56038081
Part#: N20P400EWG
Ships in 4 Business Days
New Item
$ 1,095.00 USD
Free Shipping on orders $49 and up
$ 1,095.00 USD
Free Shipping on orders $49 and up
Stop letting your N20's factory turbo strangle your lap times and choke out your top-end speed. The Pure Turbos Pure400 EWG upgrade is the track-proven weapon your four-cylinder BMW has been begging for. This isn't a simple rebuilt unit, it is a brand-new aftermarket housing packed with performance internals designed to take a beating and keep delivering. Featuring a custom billet compressor wheel, a high-flow turbine wheel for rapid exhaust scavenging, and an upgraded CHRA that is VSR-balanced to perfection, the Pure400 is built for those who push their cars to the limit. It drops right into place, replacing your stock turbocharger, and provides a reliable 300+ wheel horsepower, with supporting modifications.
Show More Show Less
Braille - Corporate Logo
T#:558046
Part#: G30
Ships in 6 Business Days
$ 522.99 USD
Free Shipping on orders $49 and up
The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.
Show More Show Less
AGA Tools - Corporate Logo
T#:6924319
Part#: AGA-6061-TC
Ships in 7 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

  • Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
  • Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
  • Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
  • Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.
Show More Show Less


Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ EWG
For vehicles with production date from 07/2013
Pure Turbos - Corporate Logo
T#:46444175
Part#: N55PURE600EWG
Ships in 9 Business Days
$ 2,589.00 USD
$ 2,589.00 USD
Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.
Solenoid Actuator For Vanos System
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863156
Part#: 11367593719
Ships in 1 Business Day
$ 37.99 USD
Free Shipping on orders $49 and up
Adjusts valve timing through cam phasing.
Valve Cover Gasket - Outer
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:5175709
Part#: 11128621951
Ships in 1 Business Day
$ 45.99

This product was last offered at the strikethrough price on
08-26-2026

$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up
If your leaking oil from the valve cover there is a good chance your valve cover has failed. Get a quality Elring replacement gasket and stop those oil leaks.

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:638811
Part#: VTT-B58-VACCUM
Ships in 10 Business Days
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Starting at $ 52.99 USD
Free Shipping on orders $49 and up
Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.
Show More Show Less

MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 2 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less
Rein Turbocharger Oil Return Line
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:17771585
Part#: 11428626653
In Stock at Vendor
$ 53.99 USD
Free Shipping on orders $49 and up
Rein OE quality return pipe is manufactured with premium rubber and is designed to be a direct-fit replacement.

MMX Performance - Corporate Logo
T#:45039725
Part#: MMR20-1004FK
Ships in 3 Business Days
$ 1,227.99 USD
Free Shipping
$ 1,227.99 USD
Free Shipping
The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.
Show More Show Less
5150 Autosport - Corporate Logo
T#:23416526
Part#: FER-HPVSK-N55
Ships in 3 Business Days
$ 1,049.99 USD
Free Shipping on orders $49 and up
Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.
Show More Show Less

Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose


Pure Turbos N20 Stage 2 Turbo Upgrade - BMW N20 2.0L w/ EWG
For vehicles with a production date from 11/2012 For vehicles with a production date from 07/2012
For vehicles with electronic waste gate (EWG)
Pure Turbos - Corporate Logo
T#:578233
Part#: PURE-N20-0002KT
Ships on Oct 6, 2026
$ 2,590.99

This product was last offered at the strikethrough price on
07-12-2026

$ 2,495.00 USD
Free Shipping
$ 2,495.00 USD
Free Shipping
As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight-six produced, but Pure Turbos have been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. With Pure Turbos' Stage 2 upgrade, the BMW N20 two-liter is capable of 400whp or more with just a few additional supporting modifications!
Show More Show Less
MANLEY - Corporate Logo
T#:17073609
Part#: 647000C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

  • Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
  • High-strength 2618 material for exceptional durability.
  • Offset wrist pin for quiet start-ups.
  • Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
  • Pressure balance groove for enhanced performance.
  • Accommodates +1mm valve sizes for customization.
  • Premium steel top rings with Napier seconds and round wire locks included.
  • Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

Show More Show Less
Performance Tool - Corporate Logo
T#:2242226
Part#: W80533
Ships in 1 Business Day
$ 20.25 USD
Free Shipping on orders $49 and up
Extended socket length reaches confined areas.


Corteco - Corporate Logo
T#:556322
Part#: 22116855456
Ships in 1 Business Day
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Reduce driveline vibrations with a new motor mount
Performance Tool - Corporate Logo
T#:2242223
Part#: W80573
Ships in 1 Business Day
$ 22.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines
Vargas Turbo Technologies - Corporate Logo
T#:5122267
Part#: VTTFILTERCAPBLUE
Ships in 1-2 days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Baum Tools - Corporate Logo
T#:641918
Part#: 161190
Ships in 5 Business Days
$ 127.68 USD
Free Shipping
$ 127.68 USD
Free Shipping
Don't damage your lock ring, do it correctly with this tool

OEM VDO Camshaft Position Sensor - BMW B48/46 B58 N20/26
We Price Match - Give Us A Call or Chat!
VDO - Corporate Logo
T#:19197278
Part#: 13627633958
Ships in 2 Business Days
$ 115.99 USD
Free Shipping on orders $49 and up
Camshaft position sensors are electrical sensors that monitor the rotational speed and position of a camshaft. This signal is used by the DME to control fuel delivery and spark timing. If your camshaft position sensor is faulty, it can result in check engine lights, rough idle or running conditions, limp mode, or no starts. Replace your cam position sensor with this high-quality replacement to restore smooth engine operation.
Show More Show Less
Evolution Racewerks - Corporate Logo
T#:587528
Part#: BM-ICP019-T3
Ships on Oct 2, 2026
$ 359.99 USD
Free Shipping
$ 359.99 USD
Free Shipping
The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.
Show More Show Less

Victor Reinz - Corporate Logo
T#:373815
Part#: 11617547242
Ships in 1 Business Day
$ 68.99

This product was last offered at the strikethrough price on
05-07-2026

$ 66.99 USD
Free Shipping on orders $49 and up
$ 66.99 USD
Free Shipping on orders $49 and up
1 for each intake runner 6 in total
Walker - Corporate Logo
T#:31324163
Part#: 11787645875
Ships in 1 Business Day
$ 101.99

This product was last offered at the strikethrough price on
04-14-2026

$ 91.99 USD
Free Shipping on orders $49 and up
$ 91.99 USD
Free Shipping on orders $49 and up
The oxygen sensor is part of your BMW's emissions control system and feeds data to BMW engine management computer. The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The goal of the oxygen sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today.
Show More Show Less

ARP - Corporate Logo
T#:25241791
Part#: B58-CA-203-4706
Back Ordered
20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD
Free Shipping on orders $49 and up
The Custom Age 625+ is made from a material that has a tensile strength of 260 ksi, which is substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their B58 builds and require a stronger head stud.
Show More Show Less

BMW N20 2.0L Front Oxygen Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863152
Part#: 11787589121
In Stock
$ 84.99 USD
Free Shipping on orders $49 and up

BMW N20 2.0L Front Oxygen Sensor - 11787589121 is a high-quality direct-fit replacement designed to restore precise air-fuel ratio measurements for optimal engine efficiency. This oxygen sensor ensures accurate emissions control and fuel economy by delivering real-time data to the engine management system. Built with durable materials to withstand extreme exhaust temperatures, it guarantees long-lasting performance and reliability. Featuring an easy plug-and-play connection, this sensor simplifies installation while maintaining OE-level precision.

  • Guaranteed fitment for seamless installation and proper functionality
  • Direct-fit OE replacement design restores accurate air-fuel mixture regulation
  • Easy plug-and-play connection for hassle-free installation
  • High-quality materials withstand extreme exhaust system heat for durability
  • Alloy conductors minimize electrical resistance for precise sensor operation
  • Backed by a 24-month unlimited mileage warranty for added confidence

Ensure optimal fuel efficiency and emissions performance by replacing your worn-out oxygen sensor with this premium-quality BMW N20 2.0L Front Oxygen Sensor.

Show More Show Less
Arc Terminator - Corporate Logo
T#:26471605
Part#: AT234F22BLA40MN2
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
Rein Turbo Charger Kit - B58
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:53785545
Part#: TRK0025
In Stock at Vendor
New Item
$ 475.99 USD
Free Shipping on orders $49 and up
$ 475.99 USD
Free Shipping on orders $49 and up
Rein TechSelect Turbo Kits feature replacements to the OE Turbocharger, including brackets, hardware and gaskets.


Braille - Corporate Logo
T#:36947237
Part#: B48-H6-L3
Ships in 4 Business Days
$ 398.99 USD
$ 398.99 USD
Corteco - Corporate Logo
T#:594954
Part#: 11238512072
Ships in 2 Business Days
$ 310.64 USD
Free Shipping on orders $49 and up
BMW F30 N47 2.0L Crankshaft Pulley (Vibration Damper) is a high-quality replacement component from Corteco, designed to ensure smooth engine operation and minimize vibration. Turner Motorsport offers this vibration damper as a perfect fit for various BMW chassis, including the F25 X3, F30, and F31 models. This crankshaft pulley helps maintain engine balance and reduces wear on other engine components by absorbing vibrations. Ideal for maintaining performance and reliability, this part is a crucial upgrade or replacement for your BMW.
  • Reduces engine vibration: Effectively dampens vibrations to protect engine components.
  • High-quality construction: Manufactured by Corteco for reliability and durability.
  • Improves engine performance: Ensures smooth operation and reduced wear.
  • Exact fit: Compatible with BMW F25 X3, F30, and F31 chassis.
  • Easy installation: Designed for straightforward replacement with no modifications required.
Show More Show Less