BMW Intake Parts for BMW 3 Series F30 (2012+)

BMW F30 E9X TMAP Sensors & PNP Adapters

T#:583821

Part#: 3.5 BAR TMAP

In Stock

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

JB4 3.5 bar plug and play TMAP adapters

BMS High Flow Silicone Turbo Inlet - BMW N55 F2X F3X F87

T#:43109033

Part#: BMS-HFSTI-FN55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.

Show More Show Less

Burger Motorsports 3.5 Bar TMAP Sensor & 32" Extension Harness - N54 ...

T#:28504212

Part#: BMS35TMAP-32

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Use these plug-and-play adapters to quickly adapt a 3.5 BAR TMAP sensor to your N54/N55 BMW, raising the boost maximum boost range from 20psi factory up to 36psi for the 3.5 bar. For most applications the 3.5 BAR adapter is suggested which requires OEM BMW sensor part number: 13627843531.

Show More Show Less

BMW N20 N26 Replacement Air Filter | Dinan High Flow Drop-in ...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:18236090

Part#: D401-0040

In Stock

Sale - Save 49% $ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.65 USD

Add to Wish List

Qty

Sale - Save 49%

$ 61.99

This product was last offered at the strikethrough price on
06-24-2026

$ 31.65 USD

Add to Wish List

BMW N20 N26 Replacement Air Filter | Dinan High Flow Drop-in from Turner Motorsport is designed to reduce maintenance costs and enhance engine performance. This high-flow, washable air filter uses advanced materials to improve airflow and increase power while reducing engine strain.

Enhanced Performance: High-flow design improves airflow, leading to a noticeable increase in engine power.
Washable and Reusable: Easily cleanable, offering a cost-effective alternative to disposable filters.
Improved Engine Efficiency: Reduces engine strain by allowing it to breathe more freely, resulting in better performance.
Easy Installation: Drop-in design ensures a hassle-free fitment for BMW N20 and N26 engines.
Cost-Effective Maintenance: A durable option that lowers long-term maintenance expenses.

Show More Show Less

Burger Motorsports Aluminum Charge Pipe Upgrade with TurboSmart BOV &...

For Gen1 B58 only

T#:27171969

Part#: B58-ACP-TSBOV

In Stock

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Burger Motorsports Performance Intake - Blue Filter - BMW F-Chassis 2...

Not for sale or use in the state of California.

T#:556808

Part#: BMS-B48-INT-B

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

Show More Show Less

Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N55 3.0L ...

T#:46890667

Part#: FMEDV104R

Back Ordered

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade - BMW B46/B48 (Gen1 & Gen2) ...

T#:51848519

Part#: G12B48CP

Ships on Oct 26, 2026

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.

Show More Show Less

Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23)

T#:20979724

Part#: TS-0223-1050

In Stock at Vendor

10% off MSRP $ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD

Add to Wish List

Qty

10% off MSRP

$ 350.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 315.99 USD

Add to Wish List

The Turbosmart BOV Kompact EM Dual Port - BMW N20/N26 (VR23) offers an advanced blow-off valve solution designed specifically for BMW’s N20 and N26 engines. Engineered with premium materials, this bolt-on unit provides an ideal balance of performance and durability. By improving turbo response and boosting control, it maximizes power efficiency and prevents compressor surge, enhancing the life of your turbocharger system. Turner Motorsport offers this product as a direct replacement with easy installation and seamless compatibility for BMW enthusiasts looking to optimize performance.

Dual Port Venting: Allows for a combination of recirculation and vent-to-atmosphere options, enhancing flexibility.
Compact Design: Precision-engineered to fit neatly into tight engine bays while delivering maximum efficiency.
Plug-and-Play Installation: Designed as a direct OEM replacement, making installation straightforward.
Improved Throttle Response: Reduces lag and improves acceleration, creating a smoother driving experience.
Quality Construction: Made from high-grade aluminum alloy for durability and performance.

Upgrade your BMW’s turbo system with the Turbosmart BOV Kompact EM Dual Port, the trusted solution for performance enthusiasts.

Show More Show Less

BMS Silicone Intake Pipe Hose Upgrade - F Chassis B58

T#:38688920

Part#: B58FINLET

Ships on Oct 26, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

The Burger Motorsports B58 BMW Silicone Intake Pipe Upgrade optimizes airflow by removing the upper factory sound resonator and lower accordion section of the stock inlet pipe, ensuring a smoother transition from the intake to the turbo. Compatible with both the OEM BMW B58 intake and the Burger Motorsports F-Chassis B58 intake for enhanced performance.

Show More Show Less

Turbosmart Raceport Gen-V Universal - Black (No Weld Flange) Female (...

T#:8076768

Part#: TS-0204-1142

In Stock at Vendor

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included) The Race Port is famous for being an amazingly small and light BOV for turbocharged competition level engines. Featuring our unique collar design and internal flow structures, it is 50% lighter and 25% smaller than the competition while flowing 330 CFM – making it the highest flowing BOV of its type on the market. Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N20 2.0L ...

T#:46890669

Part#: FMEDV110R

Ships on Oct 29, 2026

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.

Show More Show Less

BMS Aluminum Charge Pipe Upgrade w/ Blow-Off Valve Kit - BMW B46/B48 ...

T#:51883658

Part#: G1B48CPBOV

Back Ordered

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

Engineered as a direct replacement for OEM BMW Part #13718601683, the BMS Elite charge pipe addresses the structural weaknesses of the factory charge air duct. Utilizing high-gauge aluminum and precision CNC-machined throttle body and turbo flanges, this upgrade eliminates the risk of boost leaks and pipe failure common at higher boost levels.

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

TurboSmart GenV RacePort Blow-Off Valve - Purple - Female Flange ...

T#:27372081

Part#: TS-0204-1143

In Stock at Vendor

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

TurboSmart GenV RacePort Blow-Off Valve - Blue

T#:27372078

Part#: TS-0204-1141

In Stock

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

Forge Motorsport Valve Service Kit

T#:28271173

Part#: FMDV004S

Back Ordered

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

TurboSmart GenV RacePort Blow-Off Valve - Red - Female Flange ...

T#:27372080

Part#: TS-0204-1144

In Stock

$ 324.99

This product was last offered at the strikethrough price on
08-11-2026

$ 289.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 324.99

This product was last offered at the strikethrough price on
08-11-2026

$ 289.99 USD

Limited Qty Sale

Add to Wish List

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

Show More Show Less

Forge Aluminum Replacement Atmospheric Valve - N20

T#:399827

Part#: FMDVN20A

Ships on Oct 29, 2026

$ 300.99 USD

Add to Wish List

Qty

$ 300.99 USD

Add to Wish List

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less

Forge Motorsport Atmospheric Blowoff Valve - BMW N20 2.0 Turbo ...

T#:46890670

Part#: FMEDV110A

Special Order: No Guaranteed ETA

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.

Show More Show Less

Forge Motorsport Atmospheric Blowoff Valve - BMW N55 3.0L

T#:46890666

Part#: FMEDV104A

Ships on Oct 27, 2026

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.

Show More Show Less

Elite Aluminum Charge Pipe Upgrade - F Chassis B58

T#:5108975

Part#: B58FOECHARGEPIPE

Ships in 2 Business Days

$ 280.00 USD

Add to Wish List

Qty

$ 280.00 USD

Add to Wish List

Upgrade your flimsy OEM B58 BMW charge pipe to a heavy-duty aluminum replacement to prevent charge pipe failure. Designed and manufactured by Burger Motorsports in the USA. The BMS Elite is the highest quality B58 charge pipe upgrade on the market. This replacement charge pipe features all-aluminum construction, high-quality glossy black finish, CNC machined flanges, 2 optional 1/8" NPT methanol bungs, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Lifetime warranty. Made in the USA.

Show More Show Less

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships on Oct 29, 2026

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

Burger Motorsports 2013+ TypeB 4BAR Adapter - F2X F3X N54 N55 S55 ...

T#:599637

Part#: TYPEB4BARADAPTER

Back Ordered

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58

T#:5108986

Part#: FB58FRONTMOUNT

Ships on Oct 26, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks.

Show More Show Less

Recirculating Valve Kit - N20

T#:384540

Part#: FMDVN20R

Ships on Oct 29, 2026

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Show More Show Less

BMS Turbo Inlet Upgrade - F Chassis B58

T#:5108987

Part#: B58FTURBINLET

Back Ordered

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

The Burger Motorsports upgraded turbo inlet pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions creating more power and better turbo efficiency. The Burger Motorsports turbo Inlet pipe is a direct replacement for the plastic restrictive OEM unit.

Show More Show Less

BMS Elite Intake With Turbo Inlet - F Chassis B58 - Red

T#:38789912

Part#: ELITEB58INTAKER

Back Ordered

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

### **BMS Elite B58 Performance Intake – Superior Flow & Power** The **BMS Elite B58 Performance Intake** enhances airflow while preserving the best aspects of the OEM system, including **cold air ducting** and the **lightweight heat-shielded airbox base**. It upgrades the top section with **larger, high-flow ducting**, a **heatshield**, and a **premium BMS inverted cone air filter** for maximum performance. Available as a **standalone intake** or bundled with the **B58 Turbo Inlet** to maintain **consistent high airflow** all the way to the turbo. ### **Proven Performance Gains** 📈 **Dyno-tested** – Adds up to **10+ horsepower to the wheels at 25+ psi** ⚡ **Faster Turbo Spool** – Improved throttle response & enhanced performance 🔊 **Enhanced Sound** – Hear your **turbo spool** like never before! ### **Key Features:** ✅ **Increases horsepower & throttle response** ✅ **Outflows stock intake for better performance** ✅ **Includes an upper heat shield & retains OEM airbox base** ✅ **Keeps factory cold air ducting for optimal efficiency** ✅ **Premium cleanable & reusable air filter** – lasts the **lifetime of your car** ✅ **Quick, easy, and fully reversible installation** 🔧 **Made in the USA. Built for Power. Designed for Enthusiasts.** 🔥

Show More Show Less

4MM Silicone Vacuum Hose - Red - 9 Feet

T#:370918

Part#: VC04R

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less

BMS Elite Front Mount Intake - F Chassis B58 - Red

T#:38789908

Part#: FB58FRONTMOUNTR

Ships on Oct 26, 2026

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

Finally, an intake system worthy of your Gen 1 B58 BMW! The Front Mount (behind the grille) BMS Elite B58 Performance Intake completely removes the restrictive OEM intake and replaces it with 3.5" high flow ducting and BMS inverted cone performance air filters. The filters are placed behind the front grilles for maximum cold air induction, amazing sound, and intriguing looks. In addition to freeing up power, turbo spool speed is greatly improved and there's an incredible sound improvement. You'll finally be able to hear your turbos spooling! The proprietary high flow inverted cone filters can be cleaned every 15-20k miles using a cleaning kit and will last the life of the car. FEATURES AND BENEFITS Adds up to 12+ Horsepower Dramatic sound improvement Unique look Improves throttle response Huge 3.5" mandrel-bent aluminum tubing Classy gloss black powder coat finish CNC Billet aluminum fittings Looks great under the hood Cleanable and reusable performance air filters Made in the USA

Show More Show Less

BMW 5bar Sensor - B58/S58

T#:49822565

Part#: BMSB585BS

Ships on Oct 26, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Compatible with BMW B58 and S58 engines Accurate, reliable, and plug-and-play — the B58/S58 5-Bar TMAP Sensor ensures your engine sees the full boost picture, giving your tune the confidence it needs to perform safely and consistently.

Show More Show Less

BMS Elite Intake - F Chassis B58

T#:5108984

Part#: ELITEB58INTAKE

Ships on Oct 26, 2026

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.

Show More Show Less

Burger Motorsports Performance Intake - Red Filter - F22 F87 2 Series...

For vehicles equipped with a manual transmission only

T#:24677026

Part#: BMSF3XN55INTREDM

Ships on Oct 26, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling! Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway! Features: Adds up to 10+ Horsepower Dramatic sound improvement Super fast install and removal Improves throttle response Retains OEM airbox base as a heat shield Retains OEM cold air ducting Looks great under the hood Cleanable and reusable filter Made in the USA *Not for sale or use in the state of California.

Show More Show Less

Forge Motorsport Front Mount Intercooler - N55/N20 F-Chassis ...

T#:5788178

Part#: FMINT135F20

Ships on Oct 29, 2026

$ 1,088.99 USD

Add to Wish List

Qty

$ 1,088.99 USD

Add to Wish List

Forge Motorsport's N55/N20 intercooler has been designed for the BMW vehicles with the N55 3.0 single turbo engine and N20 turbo engine. This intercooler has been designed to be a direct fit for OE with no further modifications to the bumper or body parts required. Forge has tested the intercooler with results indicating a temperature drop of 25 degrees, along with a moderate increase in power. Features: Forge designed and manufactured specifically for an engineered fit to your BMW Chassis. Utilizing a solid works designed high flow hand manufactured end tanks. High density bar & plate construction air core. A simple and easy direct bolt on to the OEM position. Includes all hardware needed to install.

Show More Show Less

O-Ring

T#:58198074

Part#: 13717568031

Ships in 2 Business Days

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

Black Walnut Shell 20/30 Blast Media

10X Entries Into Our F80 M3 Sweepstakes

T#:22690744

Part#: B1100051

Ships in 9 Business Days

Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD

Add to Wish List

This blast media makes DIY carbon cleaning a breeze!

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

In Stock

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

4MM Silicone Vacuum Hose - Blue - 9 Feet

T#:370917

Part#: VC04

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

T#:15744064

Part#: GEN1B58WIS

Ships on Oct 26, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Oct 26, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Oct 23, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Oct 26, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 3 Series F30 (2012+)

Sub-Categories

Enhance Engine Performance with Silicone Vacuum Line

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results