BMW Intake Parts for BMW 3 Series F31 (2014+)

Wagner Competition intercoolers (#200001046) are engineered in Germany to be a superior N20/N55 intercooler than the factory part. With 85% more surface area than the factory IC the Wagner-designed kit is much more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling and the best intercooler upgrade is one that not only works but also installs with a minimum amount of fuss.

This competition intercooler kit utilizes a tube fin center core unit, for cooler temperatures and less pressure drop. This is for ideal for owners who are going to install a tuner, build a competition car or operate in hot climates. This can be used on the street, track, and for an everyday driving and will allow cooler temps and more air flow through the core!

Compared to the stock OEM intercooler:


One of the best features of this kit is that it's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Wagner has also engineered their end-tanks in aluminum instead of the factory plastic, which is much more durable over the long term. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. This is just the best all-around intercooler upgrade we have seen for the F30 335! Fits both N20 and N55 cars.

Size Comparison
LDH
Wagner Competition  520mm x 210mm x 130mm
stock OEM                 510mm x 130mm x 110mm

This FMIC fits the following BMWs:
2014+ F22 BMW 228i M235i
2016+ F87 BMW M2
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F31 BMW 328i - Wagon
2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
2014+ F32 BMW 428i 435i 435iX - Coupe
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
 

Rein - Crankcase Vent Hose is a high-quality replacement part specifically designed for BMW models to maintain proper engine ventilation. This vent hose is essential for regulating air pressure within the crankcase, preventing pressure build-up and reducing the risk of oil leaks or sludge formation. Engineered to meet or exceed OEM standards, the Rein - Crankcase Vent Hose ensures optimal engine performance and longevity. Available through Turner Motorsport, this direct-fit replacement part offers an easy installation solution for BMW owners looking to maintain their engine’s health.

• Designed for BMW models, ensuring perfect fit and compatibility
• Prevents pressure build-up, reducing the risk of oil leaks and engine damage
• Helps reduce oil sludge formation, promoting cleaner engine operation
• Manufactured from durable, high-quality materials for long-lasting performance
• Direct-fit replacement for hassle-free installation without modifications
• Meets or exceeds OEM specifications for superior reliability and performance

Keep your BMW’s engine running efficiently and smoothly with the Rein - Crankcase Vent Hose, a crucial component for maintaining proper crankcase ventilation.

Following in the footsteps of its big brother on the B58 engine, the 4 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger airbox and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration, the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct, these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations, a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B46/B48 engine to elicit gains of 6 HP and 6 TRQ at 5000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.

Not to be outdone by the performance side of the equation the B46/B48 intake also is completely made up of carbon fiber unlike 4 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantee that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B46/B48 carbon fiber cold air intake is a modification that is a must for any high-performance build.

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 230i, F30/F31/F34 330i, and F32/F33/F36 430i:

More Power: +6 HP & +6 lb-ft of torque at 5000 RPM
Sportier Sound
Improved throttle response
Larger volume air box (30% larger than stock) that completely seals
34% increase in filter area (stock: 76.3in², Dinan: 102.1in²)
Optimized carbon fiber intake tube
Free flowing injection molded Air Mass Meter housing (over 20% larger than stock)
Quick and easy installation

This intake tube, also known as an inlet, is a common culprit for vacuum leaks. It supplies air to the turbocharger and is typically made of plastic. However, due to frequent exposure to heat, it is prone to developing cracks or tears.

The N20 airbox includes a built-in MAF sensor. If this tube tears, it can lead to a post-MAF leak and cause your engine to run lean. This is a serious issue that requires prompt replacement to avoid potential damage to your engine.

For a reliable and affordable replacement, consider Febi's high-quality air intake tube. It's a durable solution that ensures a long-lasting repair.

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

AFE Summer Rebate Form

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is made of carbon fiber. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.